* (C) Copyright 2004-2007, 2012 Freescale Semiconductor, Inc.
* TsiChung Liew (Tsi-Chung.Liew@freescale.com)
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/rtc.h>
#include <asm/io.h>
+#include <linux/compiler.h>
#if defined(CONFIG_CMD_NET)
#include <config.h>
#include <asm/fec.h>
#endif
-/*
- * Breath some life into the CPU...
- *
- * Set up the memory map,
- * initialize a bunch of registers,
- * initialize the UPM's
- */
-void cpu_init_f(void)
+void init_fbcs(void)
{
- scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
- gpio_t *gpio = (gpio_t *) MMAP_GPIO;
- fbcs_t *fbcs = (fbcs_t *) MMAP_FBCS;
-
- out_be32(&scm1->mpr, 0x77777777);
- out_be32(&scm1->pacra, 0);
- out_be32(&scm1->pacrb, 0);
- out_be32(&scm1->pacrc, 0);
- out_be32(&scm1->pacrd, 0);
- out_be32(&scm1->pacre, 0);
- out_be32(&scm1->pacrf, 0);
- out_be32(&scm1->pacrg, 0);
-
- /* FlexBus */
- out_8(&gpio->par_be,
- GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
- GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
- out_8(&gpio->par_fbctl,
- GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
- GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
+ fbcs_t *fbcs __maybe_unused = (fbcs_t *) MMAP_FBCS;
-#if !defined(CONFIG_CF_SBF)
+#if !defined(CONFIG_SERIAL_BOOT)
#if (defined(CONFIG_SYS_CS0_BASE) && defined(CONFIG_SYS_CS0_MASK) && defined(CONFIG_SYS_CS0_CTRL))
out_be32(&fbcs->csar0, CONFIG_SYS_CS0_BASE);
out_be32(&fbcs->cscr0, CONFIG_SYS_CS0_CTRL);
out_be32(&fbcs->cscr5, CONFIG_SYS_CS5_CTRL);
out_be32(&fbcs->csmr5, CONFIG_SYS_CS5_MASK);
#endif
+}
+
+/*
+ * Breath some life into the CPU...
+ *
+ * Set up the memory map,
+ * initialize a bunch of registers,
+ * initialize the UPM's
+ */
+void cpu_init_f(void)
+{
+ gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+
+#ifdef CONFIG_MCF5441x
+ scm_t *scm = (scm_t *) MMAP_SCM;
+ pm_t *pm = (pm_t *) MMAP_PM;
+
+ /* Disable Switch */
+ *(unsigned long *)(MMAP_L2_SW0 + 0x00000024) = 0;
+
+ /* Disable core watchdog */
+ out_be16(&scm->cwcr, 0);
+ out_8(&gpio->par_fbctl,
+ GPIO_PAR_FBCTL_ALE_FB_ALE | GPIO_PAR_FBCTL_OE_FB_OE |
+ GPIO_PAR_FBCTL_FBCLK | GPIO_PAR_FBCTL_RW |
+ GPIO_PAR_FBCTL_TA_TA);
+ out_8(&gpio->par_be,
+ GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
+ GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
+
+ /* eDMA */
+ out_8(&pm->pmcr0, 17);
+
+ /* INTR0 - INTR2 */
+ out_8(&pm->pmcr0, 18);
+ out_8(&pm->pmcr0, 19);
+ out_8(&pm->pmcr0, 20);
+
+ /* I2C */
+ out_8(&pm->pmcr0, 22);
+ out_8(&pm->pmcr1, 4);
+ out_8(&pm->pmcr1, 7);
+
+ /* DTMR0 - DTMR3*/
+ out_8(&pm->pmcr0, 28);
+ out_8(&pm->pmcr0, 29);
+ out_8(&pm->pmcr0, 30);
+ out_8(&pm->pmcr0, 31);
+
+ /* PIT0 - PIT3 */
+ out_8(&pm->pmcr0, 32);
+ out_8(&pm->pmcr0, 33);
+ out_8(&pm->pmcr0, 34);
+ out_8(&pm->pmcr0, 35);
+
+ /* Edge Port */
+ out_8(&pm->pmcr0, 36);
+ out_8(&pm->pmcr0, 37);
+
+ /* USB OTG */
+ out_8(&pm->pmcr0, 44);
+ /* USB Host */
+ out_8(&pm->pmcr0, 45);
+
+ /* ESDHC */
+ out_8(&pm->pmcr0, 51);
+
+ /* ENET0 - ENET1 */
+ out_8(&pm->pmcr0, 53);
+ out_8(&pm->pmcr0, 54);
+
+ /* NAND */
+ out_8(&pm->pmcr0, 63);
+
+#ifdef CONFIG_SYS_I2C_0
+ out_8(&gpio->par_cani2c, 0xF0);
+ /* I2C0 pull up */
+ out_be16(&gpio->pcr_b, 0x003C);
+ /* I2C0 max speed */
+ out_8(&gpio->srcr_cani2c, 0x03);
+#endif
+#ifdef CONFIG_SYS_I2C_2
+ /* I2C2 */
+ out_8(&gpio->par_ssi0h, 0xA0);
+ /* I2C2, UART7 */
+ out_8(&gpio->par_ssi0h, 0xA8);
+ /* UART7 */
+ out_8(&gpio->par_ssi0l, 0x2);
+ /* UART8, UART9 */
+ out_8(&gpio->par_cani2c, 0xAA);
+ /* UART4, UART0 */
+ out_8(&gpio->par_uart0, 0xAF);
+ /* UART5, UART1 */
+ out_8(&gpio->par_uart1, 0xAF);
+ /* UART6, UART2 */
+ out_8(&gpio->par_uart2, 0xAF);
+ /* I2C2 pull up */
+ out_be16(&gpio->pcr_h, 0xF000);
+#endif
+#ifdef CONFIG_SYS_I2C_5
+ /* I2C5 */
+ out_8(&gpio->par_uart1, 0x0A);
+ /* I2C5 pull up */
+ out_be16(&gpio->pcr_e, 0x0003);
+ out_be16(&gpio->pcr_f, 0xC000);
+#endif
+
+ /* Lowest slew rate for UART0,1,2 */
+ out_8(&gpio->srcr_uart, 0x00);
+#endif /* CONFIG_MCF5441x */
+
+#ifdef CONFIG_MCF5445x
+ scm1_t *scm1 = (scm1_t *) MMAP_SCM1;
+
+ out_be32(&scm1->mpr, 0x77777777);
+ out_be32(&scm1->pacra, 0);
+ out_be32(&scm1->pacrb, 0);
+ out_be32(&scm1->pacrc, 0);
+ out_be32(&scm1->pacrd, 0);
+ out_be32(&scm1->pacre, 0);
+ out_be32(&scm1->pacrf, 0);
+ out_be32(&scm1->pacrg, 0);
+
+ /* FlexBus */
+ out_8(&gpio->par_be,
+ GPIO_PAR_BE_BE3_BE3 | GPIO_PAR_BE_BE2_BE2 |
+ GPIO_PAR_BE_BE1_BE1 | GPIO_PAR_BE_BE0_BE0);
+ out_8(&gpio->par_fbctl,
+ GPIO_PAR_FBCTL_OE | GPIO_PAR_FBCTL_TA_TA |
+ GPIO_PAR_FBCTL_RW_RW | GPIO_PAR_FBCTL_TS_TS);
+
+#ifdef CONFIG_SYS_FSL_I2C
+ out_be16(&gpio->par_feci2c,
+ GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
+#endif
+#endif /* CONFIG_MCF5445x */
+
+ /* FlexBus Chipselect */
+ init_fbcs();
/*
* now the flash base address is no longer at 0 (Newer ColdFire family
if (CONFIG_SYS_CS0_BASE != 0)
setvbr(CONFIG_SYS_CS0_BASE);
-#ifdef CONFIG_FSL_I2C
- out_be16(&gpio->par_feci2c,
- GPIO_PAR_FECI2C_SCL_SCL | GPIO_PAR_FECI2C_SDA_SDA);
-#endif
-
icache_enable();
}
void uart_port_conf(int port)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+#ifdef CONFIG_MCF5441x
+ pm_t *pm = (pm_t *) MMAP_PM;
+#endif
/* Setup Ports: */
switch (port) {
+#ifdef CONFIG_MCF5441x
+ case 0:
+ /* UART0 */
+ out_8(&pm->pmcr0, 24);
+ clrbits_8(&gpio->par_uart0,
+ ~(GPIO_PAR_UART0_U0RXD_MASK | GPIO_PAR_UART0_U0TXD_MASK));
+ setbits_8(&gpio->par_uart0,
+ GPIO_PAR_UART0_U0RXD_U0RXD | GPIO_PAR_UART0_U0TXD_U0TXD);
+ break;
+ case 1:
+ /* UART1 */
+ out_8(&pm->pmcr0, 25);
+ clrbits_8(&gpio->par_uart1,
+ ~(GPIO_PAR_UART1_U1RXD_MASK | GPIO_PAR_UART1_U1TXD_MASK));
+ setbits_8(&gpio->par_uart1,
+ GPIO_PAR_UART1_U1RXD_U1RXD | GPIO_PAR_UART1_U1TXD_U1TXD);
+ break;
+ case 2:
+ /* UART2 */
+ out_8(&pm->pmcr0, 26);
+ clrbits_8(&gpio->par_uart2,
+ ~(GPIO_PAR_UART2_U2RXD_MASK | GPIO_PAR_UART2_U2TXD_MASK));
+ setbits_8(&gpio->par_uart2,
+ GPIO_PAR_UART2_U2RXD_U2RXD | GPIO_PAR_UART2_U2TXD_U2TXD);
+ break;
+ case 3:
+ /* UART3 */
+ out_8(&pm->pmcr0, 27);
+ clrbits_8(&gpio->par_dspi0,
+ ~(GPIO_PAR_DSPI0_SIN_MASK | GPIO_PAR_DSPI0_SOUT_MASK));
+ setbits_8(&gpio->par_dspi0,
+ GPIO_PAR_DSPI0_SIN_U3RXD | GPIO_PAR_DSPI0_SOUT_U3TXD);
+ break;
+ case 4:
+ /* UART4 */
+ out_8(&pm->pmcr1, 24);
+ clrbits_8(&gpio->par_uart0,
+ ~(GPIO_PAR_UART0_U0CTS_MASK | GPIO_PAR_UART0_U0RTS_MASK));
+ setbits_8(&gpio->par_uart0,
+ GPIO_PAR_UART0_U0CTS_U4TXD | GPIO_PAR_UART0_U0RTS_U4RXD);
+ break;
+ case 5:
+ /* UART5 */
+ out_8(&pm->pmcr1, 25);
+ clrbits_8(&gpio->par_uart1,
+ ~(GPIO_PAR_UART1_U1CTS_MASK | GPIO_PAR_UART1_U1RTS_MASK));
+ setbits_8(&gpio->par_uart1,
+ GPIO_PAR_UART1_U1CTS_U5TXD | GPIO_PAR_UART1_U1RTS_U5RXD);
+ break;
+ case 6:
+ /* UART6 */
+ out_8(&pm->pmcr1, 26);
+ clrbits_8(&gpio->par_uart2,
+ ~(GPIO_PAR_UART2_U2CTS_MASK | GPIO_PAR_UART2_U2RTS_MASK));
+ setbits_8(&gpio->par_uart2,
+ GPIO_PAR_UART2_U2CTS_U6TXD | GPIO_PAR_UART2_U2RTS_U6RXD);
+ break;
+ case 7:
+ /* UART7 */
+ out_8(&pm->pmcr1, 27);
+ clrbits_8(&gpio->par_ssi0h, ~GPIO_PAR_SSI0H_RXD_MASK);
+ clrbits_8(&gpio->par_ssi0l, ~GPIO_PAR_SSI0L_BCLK_MASK);
+ setbits_8(&gpio->par_ssi0h, GPIO_PAR_SSI0H_FS_U7TXD);
+ setbits_8(&gpio->par_ssi0l, GPIO_PAR_SSI0L_BCLK_U7RXD);
+ break;
+ case 8:
+ /* UART8 */
+ out_8(&pm->pmcr0, 28);
+ clrbits_8(&gpio->par_cani2c,
+ ~(GPIO_PAR_CANI2C_I2C0SCL_MASK | GPIO_PAR_CANI2C_I2C0SDA_MASK));
+ setbits_8(&gpio->par_cani2c,
+ GPIO_PAR_CANI2C_I2C0SCL_U8TXD | GPIO_PAR_CANI2C_I2C0SDA_U8RXD);
+ break;
+ case 9:
+ /* UART9 */
+ out_8(&pm->pmcr1, 29);
+ clrbits_8(&gpio->par_cani2c,
+ ~(GPIO_PAR_CANI2C_CAN1TX_MASK | GPIO_PAR_CANI2C_CAN1RX_MASK));
+ setbits_8(&gpio->par_cani2c,
+ GPIO_PAR_CANI2C_CAN1TX_U9TXD | GPIO_PAR_CANI2C_CAN1RX_U9RXD);
+ break;
+#endif
+#ifdef CONFIG_MCF5445x
case 0:
clrbits_8(&gpio->par_uart,
GPIO_PAR_UART_U0TXD_U0TXD | GPIO_PAR_UART_U0RXD_U0RXD);
GPIO_PAR_FECI2C_SCL_U2TXD | GPIO_PAR_FECI2C_SDA_U2RXD);
#endif
break;
+#endif /* CONFIG_MCF5445x */
}
}
int fecpin_setclear(struct eth_device *dev, int setclear)
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+#ifdef CONFIG_MCF5445x
struct fec_info_s *info = (struct fec_info_s *)dev->priv;
if (setclear) {
#endif
}
}
+#endif /* CONFIG_MCF5445x */
+
+#ifdef CONFIG_MCF5441x
+ if (setclear) {
+ out_8(&gpio->par_fec, 0x03);
+ out_8(&gpio->srcr_fec, 0x0F);
+ clrsetbits_8(&gpio->par_simp0h, ~GPIO_PAR_SIMP0H_DAT_MASK,
+ GPIO_PAR_SIMP0H_DAT_GPIO);
+ clrsetbits_8(&gpio->pddr_g, ~GPIO_PDDR_G4_MASK,
+ GPIO_PDDR_G4_OUTPUT);
+ clrbits_8(&gpio->podr_g, ~GPIO_PODR_G4_MASK);
+
+ } else
+ clrbits_8(&gpio->par_fec, ~GPIO_PAR_FEC_FEC_MASK);
+#endif
return 0;
}
#endif
{
gpio_t *gpio = (gpio_t *) MMAP_GPIO;
+#ifdef CONFIG_MCF5445x
out_8(&gpio->par_dspi,
GPIO_PAR_DSPI_SIN_SIN |
GPIO_PAR_DSPI_SOUT_SOUT |
GPIO_PAR_DSPI_SCK_SCK);
+#endif
+
+#ifdef CONFIG_MCF5441x
+ pm_t *pm = (pm_t *) MMAP_PM;
+
+ out_8(&gpio->par_dspi0,
+ GPIO_PAR_DSPI0_SIN_DSPI0SIN | GPIO_PAR_DSPI0_SOUT_DSPI0SOUT |
+ GPIO_PAR_DSPI0_SCK_DSPI0SCK);
+ out_8(&gpio->srcr_dspiow, 3);
+
+ /* DSPI0 */
+ out_8(&pm->pmcr0, 23);
+#endif
}
int cfspi_claim_bus(uint bus, uint cs)
/* Clear FIFO and resume transfer */
clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
+#ifdef CONFIG_MCF5445x
switch (cs) {
case 0:
clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
setbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
break;
}
+#endif
+
+#ifdef CONFIG_MCF5441x
+ switch (cs) {
+ case 0:
+ clrbits_8(&gpio->par_dspi0, ~GPIO_PAR_DSPI0_PCS0_MASK);
+ setbits_8(&gpio->par_dspi0, GPIO_PAR_DSPI0_PCS0_DSPI0PCS0);
+ break;
+ case 1:
+ clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
+ setbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
+ break;
+ }
+#endif
return 0;
}
/* Clear FIFO */
clrbits_be32(&dspi->mcr, DSPI_MCR_CTXF | DSPI_MCR_CRXF);
+#ifdef CONFIG_MCF5445x
switch (cs) {
case 0:
clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS0_PCS0);
clrbits_8(&gpio->par_dspi, GPIO_PAR_DSPI_PCS5_PCS5);
break;
}
+#endif
+
+#ifdef CONFIG_MCF5441x
+ if (cs == 1)
+ clrbits_8(&gpio->par_dspiow, GPIO_PAR_DSPIOW_DSPI0PSC1);
+#endif
}
#endif
projects / karo-tx-uboot.git / blobdiff