]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - arch/powerpc/cpu/mpc5xxx/i2c.c
Add GPL-2.0+ SPDX-License-Identifier to source files
[karo-tx-uboot.git] / arch / powerpc / cpu / mpc5xxx / i2c.c
index 4f7f71632873318d9989a6babe47e8d6e5af05b4..73601ae184a2fdaa33fe55790e5689426b808ab6 100644 (file)
@@ -2,23 +2,7 @@
  * (C) Copyright 2003
  * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -30,6 +14,7 @@ DECLARE_GLOBAL_DATA_PTR;
 #include <mpc5xxx.h>
 #include <i2c.h>
 
+#if !defined(CONFIG_I2C_MULTI_BUS)
 #if (CONFIG_SYS_I2C_MODULE == 2)
 #define I2C_BASE       MPC5XXX_I2C2
 #elif (CONFIG_SYS_I2C_MODULE == 1)
@@ -37,6 +22,19 @@ DECLARE_GLOBAL_DATA_PTR;
 #else
 #error CONFIG_SYS_I2C_MODULE is not properly configured
 #endif
+#else
+static unsigned int i2c_bus_num __attribute__ ((section (".data"))) =
+                                               CONFIG_SYS_SPD_BUS_NUM;
+static unsigned int i2c_bus_speed[2] = {CONFIG_SYS_I2C_SPEED,
+                                       CONFIG_SYS_I2C_SPEED};
+
+static const  unsigned long i2c_dev[2] = {
+       MPC5XXX_I2C1,
+       MPC5XXX_I2C2,
+};
+
+#define I2C_BASE       ((struct mpc5xxx_i2c *)i2c_dev[i2c_bus_num])
+#endif
 
 #define I2C_TIMEOUT    6667
 #define I2C_RETRIES    3
@@ -86,14 +84,11 @@ static int wait_for_bb(void)
        status = mpc_reg_in(&regs->msr);
 
        while (timeout-- && (status & I2C_BB)) {
-#if 1
-               volatile int temp;
                mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
-               temp = mpc_reg_in(&regs->mdr);
+               (void)mpc_reg_in(&regs->mdr);
                mpc_reg_out(&regs->mcr, 0, I2C_STA);
                mpc_reg_out(&regs->mcr, 0, 0);
                mpc_reg_out(&regs->mcr, I2C_EN, 0);
-#endif
                udelay(15);
                status = mpc_reg_in(&regs->msr);
        }
@@ -299,7 +294,7 @@ static int mpc_get_fdr(int speed)
                        {126, 128}
                };
 
-               ipb = gd->ipb_clk;
+               ipb = gd->arch.ipb_clk;
                for (i = 7; i >= 0; i--) {
                        for (j = 7; j >= 0; j--) {
                                scl = 2 * (scltap[j].scl2tap +
@@ -318,8 +313,7 @@ static int mpc_get_fdr(int speed)
                if (gd->flags & GD_FLG_RELOC) {
                        fdr = divider;
                } else {
-                       if (gd->have_console)
-                               printf("%ld kHz, ", best_speed / 1000);
+                       printf("%ld kHz, ", best_speed / 1000);
                        return divider;
                }
        }
@@ -360,34 +354,29 @@ int i2c_read(uchar chip, uint addr, int alen, uchar *buf, int len)
        xaddr[3] =  addr        & 0xFF;
 
        if (wait_for_bb()) {
-               if (gd->have_console)
-                       printf("i2c_read: bus is busy\n");
+               printf("i2c_read: bus is busy\n");
                goto Done;
        }
 
        mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
        if (do_address(chip, 0)) {
-               if (gd->have_console)
-                       printf("i2c_read: failed to address chip\n");
+               printf("i2c_read: failed to address chip\n");
                goto Done;
        }
 
        if (send_bytes(chip, &xaddr[4-alen], alen)) {
-               if (gd->have_console)
-                       printf("i2c_read: send_bytes failed\n");
+               printf("i2c_read: send_bytes failed\n");
                goto Done;
        }
 
        mpc_reg_out(&regs->mcr, I2C_RSTA, I2C_RSTA);
        if (do_address(chip, 1)) {
-               if (gd->have_console)
-                       printf("i2c_read: failed to address chip\n");
+               printf("i2c_read: failed to address chip\n");
                goto Done;
        }
 
        if (receive_bytes(chip, (char *)buf, len)) {
-               if (gd->have_console)
-                       printf("i2c_read: receive_bytes failed\n");
+               printf("i2c_read: receive_bytes failed\n");
                goto Done;
        }
 
@@ -409,27 +398,23 @@ int i2c_write(uchar chip, uint addr, int alen, uchar *buf, int len)
        xaddr[3] =  addr        & 0xFF;
 
        if (wait_for_bb()) {
-               if (gd->have_console)
-                       printf("i2c_write: bus is busy\n");
+               printf("i2c_write: bus is busy\n");
                goto Done;
        }
 
        mpc_reg_out(&regs->mcr, I2C_STA, I2C_STA);
        if (do_address(chip, 0)) {
-               if (gd->have_console)
-                       printf("i2c_write: failed to address chip\n");
+               printf("i2c_write: failed to address chip\n");
                goto Done;
        }
 
        if (send_bytes(chip, &xaddr[4-alen], alen)) {
-               if (gd->have_console)
-                       printf("i2c_write: send_bytes failed\n");
+               printf("i2c_write: send_bytes failed\n");
                goto Done;
        }
 
        if (send_bytes(chip, (char *)buf, len)) {
-               if (gd->have_console)
-                       printf("i2c_write: send_bytes failed\n");
+               printf("i2c_write: send_bytes failed\n");
                goto Done;
        }
 
@@ -439,4 +424,33 @@ Done:
        return ret;
 }
 
+#if defined(CONFIG_I2C_MULTI_BUS)
+int i2c_set_bus_num(unsigned int bus)
+{
+       if (bus > 1)
+               return -1;
+
+       i2c_bus_num = bus;
+       i2c_init(i2c_bus_speed[bus], CONFIG_SYS_I2C_SLAVE);
+       return 0;
+}
+
+int i2c_set_bus_speed(unsigned int speed)
+{
+       i2c_init(speed, CONFIG_SYS_I2C_SLAVE);
+       return 0;
+}
+
+unsigned int i2c_get_bus_num(void)
+{
+       return i2c_bus_num;
+}
+
+unsigned int i2c_get_bus_speed(void)
+{
+       return i2c_bus_speed[i2c_bus_num];
+}
+#endif
+
+
 #endif /* CONFIG_HARD_I2C */