* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <config.h>
#include <asm/fsl_lbc.h>
#include <post.h>
#include <asm/processor.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
DECLARE_GLOBAL_DATA_PTR;
uint major, minor;
struct cpu_type *cpu;
char buf1[32], buf2[32];
-#if (defined(CONFIG_DDR_CLK_FREQ) || \
- defined(CONFIG_FSL_CORENET)) && !defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#endif /* CONFIG_FSL_CORENET */
+#if defined(CONFIG_DDR_CLK_FREQ) || defined(CONFIG_FSL_CORENET)
+ ccsr_gur_t __iomem *gur =
+ (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+#endif
/*
* Cornet platforms use ddr sync bit in RCW to indicate sync vs async
switch(ver) {
case PVR_VER_E500_V1:
case PVR_VER_E500_V2:
- puts("E500");
+ puts("e500");
break;
case PVR_VER_E500MC:
- puts("E500MC");
+ puts("e500mc");
break;
case PVR_VER_E5500:
- puts("E5500");
+ puts("e5500");
break;
case PVR_VER_E6500:
- puts("E6500");
+ puts("e6500");
break;
default:
puts("Unknown");
if (!(i & 3))
printf ("\n ");
printf("CPU%d:%-4s MHz, ", core,
- strmhz(buf1, sysinfo.freqProcessor[core]));
+ strmhz(buf1, sysinfo.freq_processor[core]));
}
- printf("\n CCB:%-4s MHz,\n", strmhz(buf1, sysinfo.freqSystemBus));
+ printf("\n CCB:%-4s MHz,", strmhz(buf1, sysinfo.freq_systembus));
+ printf("\n");
#ifdef CONFIG_FSL_CORENET
if (ddr_sync == 1) {
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Synchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
} else {
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Asynchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
}
#else
switch (ddr_ratio) {
case 0x0:
printf(" DDR:%-4s MHz (%s MT/s data rate), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
break;
case 0x7:
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Synchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
break;
default:
printf(" DDR:%-4s MHz (%s MT/s data rate) "
"(Asynchronous), ",
- strmhz(buf1, sysinfo.freqDDRBus/2),
- strmhz(buf2, sysinfo.freqDDRBus));
+ strmhz(buf1, sysinfo.freq_ddrbus/2),
+ strmhz(buf2, sysinfo.freq_ddrbus));
break;
}
#endif
#if defined(CONFIG_FSL_LBC)
- if (sysinfo.freqLocalBus > LCRR_CLKDIV) {
- printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+ if (sysinfo.freq_localbus > LCRR_CLKDIV) {
+ printf("LBC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
} else {
printf("LBC: unknown (LCRR[CLKDIV] = 0x%02lx)\n",
- sysinfo.freqLocalBus);
+ sysinfo.freq_localbus);
}
#endif
#if defined(CONFIG_FSL_IFC)
- printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freqLocalBus));
+ printf("IFC:%-4s MHz\n", strmhz(buf1, sysinfo.freq_localbus));
#endif
#ifdef CONFIG_CPM2
- printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freqSystemBus));
+ printf("CPM: %s MHz\n", strmhz(buf1, sysinfo.freq_systembus));
#endif
#ifdef CONFIG_QE
- printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freqQE));
+ printf(" QE:%-4s MHz\n", strmhz(buf1, sysinfo.freq_qe));
#endif
#ifdef CONFIG_SYS_DPAA_FMAN
for (i = 0; i < CONFIG_SYS_NUM_FMAN; i++) {
printf(" FMAN%d: %s MHz\n", i + 1,
- strmhz(buf1, sysinfo.freqFMan[i]));
+ strmhz(buf1, sysinfo.freq_fman[i]));
}
#endif
#ifdef CONFIG_SYS_DPAA_QBMAN
- printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freqQMAN));
+ printf(" QMAN: %s MHz\n", strmhz(buf1, sysinfo.freq_qman));
#endif
#ifdef CONFIG_SYS_DPAA_PME
- printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freqPME));
+ printf(" PME: %s MHz\n", strmhz(buf1, sysinfo.freq_pme));
#endif
- puts("L1: D-cache 32 kB enabled\n I-cache 32 kB enabled\n");
+ puts("L1: D-cache 32 KiB enabled\n I-cache 32 KiB enabled\n");
+
+#ifdef CONFIG_FSL_CORENET
+ /* Display the RCW, so that no one gets confused as to what RCW
+ * we're actually using for this boot.
+ */
+ puts("Reset Configuration Word (RCW):");
+ for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+ u32 rcw = in_be32(&gur->rcwsr[i]);
+
+ if ((i % 4) == 0)
+ printf("\n %08x:", i * 4);
+ printf(" %08x", rcw);
+ }
+ puts("\n");
+#endif
return 0;
}
#if defined(CONFIG_WATCHDOG)
-void
-watchdog_reset(void)
-{
- int re_enable = disable_interrupts();
- reset_85xx_watchdog();
- if (re_enable) enable_interrupts();
-}
-
void
reset_85xx_watchdog(void)
{
*/
mtspr(SPRN_TSR, TSR_WIS);
}
+
+void
+watchdog_reset(void)
+{
+ int re_enable = disable_interrupts();
+
+ reset_85xx_watchdog();
+ if (re_enable)
+ enable_interrupts();
+}
#endif /* CONFIG_WATCHDOG */
/*
#if defined(CONFIG_SPD_EEPROM) || defined(CONFIG_DDR_SPD)
return fsl_ddr_sdram_size();
#else
- return CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
+ return (phys_size_t)CONFIG_SYS_SDRAM_SIZE * 1024 * 1024;
#endif
}
#else /* CONFIG_SYS_RAMBOOT */
int i, j, k, m;
u8 *p_8;
u32 *p_32;
- ccsr_ddr_t *ddr[CONFIG_NUM_DDR_CONTROLLERS];
+ struct ccsr_ddr __iomem *ddr[CONFIG_NUM_DDR_CONTROLLERS];
generic_spd_eeprom_t
spd[CONFIG_NUM_DDR_CONTROLLERS][CONFIG_DIMM_SLOTS_PER_CTLR];
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
switch (i) {
case 0:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR_ADDR;
break;
-#if defined(CONFIG_SYS_MPC8xxx_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
+#if defined(CONFIG_SYS_FSL_DDR2_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 1)
case 1:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR2_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR2_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
+#if defined(CONFIG_SYS_FSL_DDR3_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 2)
case 2:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR3_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR3_ADDR;
break;
#endif
-#if defined(CONFIG_SYS_MPC8xxx_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
+#if defined(CONFIG_SYS_FSL_DDR4_ADDR) && (CONFIG_NUM_DDR_CONTROLLERS > 3)
case 3:
- ddr[i] = (void *)CONFIG_SYS_MPC8xxx_DDR4_ADDR;
+ ddr[i] = (void *)CONFIG_SYS_FSL_DDR4_ADDR;
break;
#endif
default:
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++)
printf(" Base + 0x%04x", (u32)ddr[i] & 0xFFFF);
puts("\n");
- for (k = 0; k < sizeof(ccsr_ddr_t)/4; k++) {
+ for (k = 0; k < sizeof(struct ccsr_ddr)/4; k++) {
m = 0;
printf("%6d (0x%04x)", k * 4, k * 4);
for (i = 0; i < CONFIG_NUM_DDR_CONTROLLERS; i++) {
projects / karo-tx-uboot.git / blobdiff