#include <asm/mmu.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
+#include <asm/fsl_srio.h>
+#include <hwconfig.h>
#include <linux/compiler.h>
#include "mp.h"
-#ifdef CONFIG_SYS_QE_FW_IN_NAND
+#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
#include <nand.h>
#include <errno.h>
#endif
DECLARE_GLOBAL_DATA_PTR;
-extern void srio_init(void);
-
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
+ setbits_be32(&cpc->cpchdbcr0, 1 << (31 - 21));
+#endif
out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
/* Read back to sync write */
printf("Corenet Platform Cache: %d KB enabled\n", size);
}
-void invalidate_cpc(void)
+static void invalidate_cpc(void)
{
int i;
cpc_corenet_t *cpc = (cpc_corenet_t *)CONFIG_SYS_FSL_CPC_ADDR;
}
__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+int enable_cluster_l2(void)
+{
+ int i = 0;
+ u32 cluster;
+ ccsr_gur_t *gur = (void __iomem *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ struct ccsr_cluster_l2 __iomem *l2cache;
+
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+ if (cluster & TP_CLUSTER_EOC)
+ return 0;
+
+ /* The first cache has already been set up, so skip it */
+ i++;
+
+ /* Look through the remaining clusters, and set up their caches */
+ do {
+ int j, cluster_valid = 0;
+
+ l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
+
+ cluster = in_be32(&gur->tp_cluster[i].lower);
+
+ /* check that at least one core/accel is enabled in cluster */
+ for (j = 0; j < 4; j++) {
+ u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
+ u32 type = in_be32(&gur->tp_ityp[idx]);
+
+ if (type & TP_ITYP_AV)
+ cluster_valid = 1;
+ }
+
+ if (cluster_valid) {
+ /* set stash ID to (cluster) * 2 + 32 + 1 */
+ clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
+
+ printf("enable l2 for cluster %d %p\n", i, l2cache);
+
+ out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
+ while ((in_be32(&l2cache->l2csr0)
+ & (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
+ ;
+ out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE);
+ }
+ i++;
+ } while (!(cluster & TP_CLUSTER_EOC));
+
+ return 0;
+}
+#endif
+
/*
* Initialize L2 as cache.
*
{
__maybe_unused u32 svr = get_svr();
#ifdef CONFIG_SYS_LBC_LCRR
- volatile fsl_lbc_t *lbc = LBC_BASE_ADDR;
+ fsl_lbc_t *lbc = (void __iomem *)LBC_BASE_ADDR;
+#endif
+#ifdef CONFIG_L2_CACHE
+ ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+ struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
+#endif
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
+ extern int spin_table_compat;
+ const char *spin;
#endif
-#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22)
- flush_dcache();
- mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
- sync();
+#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
+ defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
+ /*
+ * CPU22 and NMG_CPU_A011 share the same workaround.
+ * CPU22 applies to P4080 rev 1.0, 2.0, fixed in 3.0
+ * NMG_CPU_A011 applies to P4080 rev 1.0, 2.0, fixed in 3.0
+ * also applies to P3041 rev 1.0, 1.1, P2041 rev 1.0, 1.1, both
+ * fixed in 2.0. NMG_CPU_A011 is activated by default and can
+ * be disabled by hwconfig with syntax:
+ *
+ * fsl_cpu_a011:disable
+ */
+ extern int enable_cpu_a011_workaround;
+#ifdef CONFIG_SYS_P4080_ERRATUM_CPU22
+ enable_cpu_a011_workaround = (SVR_MAJ(svr) < 3);
+#else
+ char buffer[HWCONFIG_BUFFER_SIZE];
+ char *buf = NULL;
+ int n, res;
+
+ n = getenv_f("hwconfig", buffer, sizeof(buffer));
+ if (n > 0)
+ buf = buffer;
+
+ res = hwconfig_arg_cmp_f("fsl_cpu_a011", "disable", buf);
+ if (res > 0)
+ enable_cpu_a011_workaround = 0;
+ else {
+ if (n >= HWCONFIG_BUFFER_SIZE) {
+ printf("fsl_cpu_a011 was not found. hwconfig variable "
+ "may be too long\n");
+ }
+ enable_cpu_a011_workaround =
+ (SVR_SOC_VER(svr) == SVR_P4080 && SVR_MAJ(svr) < 3) ||
+ (SVR_SOC_VER(svr) != SVR_P4080 && SVR_MAJ(svr) < 2);
+ }
+#endif
+ if (enable_cpu_a011_workaround) {
+ flush_dcache();
+ mtspr(L1CSR2, (mfspr(L1CSR2) | L1CSR2_DCWS));
+ sync();
+ }
+#endif
+
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
+ spin = getenv("spin_table_compat");
+ if (spin && (*spin == 'n'))
+ spin_table_compat = 0;
+ else
+ spin_table_compat = 1;
#endif
puts ("L2: ");
#if defined(CONFIG_L2_CACHE)
- volatile ccsr_l2cache_t *l2cache = (void *)CONFIG_SYS_MPC85xx_L2_ADDR;
volatile uint cache_ctl;
uint ver;
u32 l2siz_field;
break;
case 0x1:
if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E) {
+ ver == SVR_8541 || ver == SVR_8555) {
puts("128 KB ");
/* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
cache_ctl = 0xc4000000;
break;
case 0x2:
if (ver == SVR_8540 || ver == SVR_8560 ||
- ver == SVR_8541 || ver == SVR_8541_E ||
- ver == SVR_8555 || ver == SVR_8555_E) {
+ ver == SVR_8541 || ver == SVR_8555) {
puts("256 KB ");
/* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
cache_ctl = 0xc8000000;
&& l2srbar >= CONFIG_SYS_FLASH_BASE) {
l2srbar = CONFIG_SYS_INIT_L2_ADDR;
l2cache->l2srbar0 = l2srbar;
- printf("moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
+ printf(", moving to 0x%08x", CONFIG_SYS_INIT_L2_ADDR);
}
#endif /* CONFIG_SYS_INIT_L2_ADDR */
puts("\n");
puts("enabled\n");
}
#elif defined(CONFIG_BACKSIDE_L2_CACHE)
- if ((SVR_SOC_VER(svr) == SVR_P2040) ||
- (SVR_SOC_VER(svr) == SVR_P2040_E)) {
+ if (SVR_SOC_VER(svr) == SVR_P2040) {
puts("N/A\n");
goto skip_l2;
}
}
skip_l2:
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+ if (l2cache->l2csr0 & L2CSR0_L2E)
+ printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64);
+
+ enable_cluster_l2();
#else
puts("disabled\n");
#endif
/* needs to be in ram since code uses global static vars */
fsl_serdes_init();
+#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
+ if (IS_SVR_REV(svr, 1, 0)) {
+ int i;
+ __be32 *p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb004c;
+
+ for (i = 0; i < 12; i++) {
+ p += i + (i > 5 ? 11 : 0);
+ out_be32(p, 0x2);
+ }
+ p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb0108;
+ out_be32(p, 0x34);
+ }
+#endif
+
#ifdef CONFIG_SYS_SRIO
srio_init();
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
+ char *s = getenv("bootmaster");
+ if (s) {
+ if (!strcmp(s, "SRIO1")) {
+ srio_boot_master(1);
+ srio_boot_master_release_slave(1);
+ }
+ if (!strcmp(s, "SRIO2")) {
+ srio_boot_master(2);
+ srio_boot_master_release_slave(2);
+ }
+ }
+#endif
#endif
#if defined(CONFIG_MP)
setup_mp();
#endif
-#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC136
+#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC13
{
- void *p;
- p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
- setbits_be32(p, 1 << (31 - 14));
+ if (SVR_MAJ(svr) < 3) {
+ void *p;
+ p = (void *)CONFIG_SYS_DCSRBAR + 0x20520;
+ setbits_be32(p, 1 << (31 - 14));
+ }
}
#endif
}
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_USB14
+ /* On P204x/P304x/P50x0 Rev1.0, USB transmit will result internal
+ * multi-bit ECC errors which has impact on performance, so software
+ * should disable all ECC reporting from USB1 and USB2.
+ */
+ if (IS_SVR_REV(get_svr(), 1, 0)) {
+ struct dcsr_dcfg_regs *dcfg = (struct dcsr_dcfg_regs *)
+ (CONFIG_SYS_DCSRBAR + CONFIG_SYS_DCSR_DCFG_OFFSET);
+ setbits_be32(&dcfg->ecccr1,
+ (DCSR_DCFG_ECC_DISABLE_USB1 |
+ DCSR_DCFG_ECC_DISABLE_USB2));
+ }
+#endif
+
+#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
+ ccsr_usb_phy_t *usb_phy =
+ (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
+ setbits_be32(&usb_phy->pllprg[1],
+ CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN |
+ CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN |
+ CONFIG_SYS_FSL_USB_PLLPRG2_MFI |
+ CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
+ setbits_be32(&usb_phy->port1.ctrl,
+ CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+ setbits_be32(&usb_phy->port1.drvvbuscfg,
+ CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+ setbits_be32(&usb_phy->port1.pwrfltcfg,
+ CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+ setbits_be32(&usb_phy->port2.ctrl,
+ CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+ setbits_be32(&usb_phy->port2.drvvbuscfg,
+ CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+ setbits_be32(&usb_phy->port2.pwrfltcfg,
+ CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+#endif
+
#ifdef CONFIG_FMAN_ENET
fman_enet_init();
#endif
*/
if (IS_SVR_REV(svr, 1, 0) &&
((SVR_SOC_VER(svr) == SVR_P1022) ||
- (SVR_SOC_VER(svr) == SVR_P1022_E) ||
- (SVR_SOC_VER(svr) == SVR_P1013) ||
- (SVR_SOC_VER(svr) == SVR_P1013_E))) {
+ (SVR_SOC_VER(svr) == SVR_P1013))) {
fsl_sata_reg_t *reg;
/* first SATA controller */
* disabled by the time we get called.
*/
msr = mfmsr();
- msr &= ~(MSR_ME|MSR_CE|MSR_DE);
+ msr &= ~(MSR_ME|MSR_CE);
mtmsr(msr);
setup_ivors();
{
#ifdef CONFIG_QE
uint qe_base = CONFIG_SYS_IMMR + 0x00080000; /* QE immr base */
-#ifdef CONFIG_SYS_QE_FW_IN_NAND
+#ifdef CONFIG_SYS_QE_FMAN_FW_IN_NAND
int ret;
- size_t fw_length = CONFIG_SYS_QE_FW_LENGTH;
+ size_t fw_length = CONFIG_SYS_QE_FMAN_FW_LENGTH;
/* load QE firmware from NAND flash to DDR first */
- ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FW_IN_NAND,
- &fw_length, (u_char *)CONFIG_SYS_QE_FW_ADDR);
+ ret = nand_read(&nand_info[0], (loff_t)CONFIG_SYS_QE_FMAN_FW_IN_NAND,
+ &fw_length, (u_char *)CONFIG_SYS_QE_FMAN_FW_ADDR);
if (ret && ret == -EUCLEAN) {
printf ("NAND read for QE firmware at offset %x failed %d\n",
- CONFIG_SYS_QE_FW_IN_NAND, ret);
+ CONFIG_SYS_QE_FMAN_FW_IN_NAND, ret);
}
#endif
qe_init(qe_base);
projects / karo-tx-uboot.git / blobdiff