* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <asm/cache.h>
#include <asm/mmu.h>
+#include <asm/fsl_errata.h>
#include <asm/fsl_law.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_srio.h>
+#include <fsl_usb.h>
#include <hwconfig.h>
#include <linux/compiler.h>
#include "mp.h"
DECLARE_GLOBAL_DATA_PTR;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+void fsl_erratum_a006261_workaround(struct ccsr_usb_phy __iomem *usb_phy)
+{
+#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
+ u32 xcvrprg = in_be32(&usb_phy->port1.xcvrprg);
+
+ /* Increase Disconnect Threshold by 50mV */
+ xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
+ INC_DCNT_THRESHOLD_50MV;
+ /* Enable programming of USB High speed Disconnect threshold */
+ xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
+ out_be32(&usb_phy->port1.xcvrprg, xcvrprg);
+
+ xcvrprg = in_be32(&usb_phy->port2.xcvrprg);
+ /* Increase Disconnect Threshold by 50mV */
+ xcvrprg &= ~CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_MASK |
+ INC_DCNT_THRESHOLD_50MV;
+ /* Enable programming of USB High speed Disconnect threshold */
+ xcvrprg |= CONFIG_SYS_FSL_USB_XCVRPRG_HS_DCNT_PROG_EN;
+ out_be32(&usb_phy->port2.xcvrprg, xcvrprg);
+#else
+
+ u32 temp = 0;
+ u32 status = in_be32(&usb_phy->status1);
+
+ u32 squelch_prog_rd_0_2 =
+ (status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_0)
+ & CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
+
+ u32 squelch_prog_rd_3_5 =
+ (status >> CONFIG_SYS_FSL_USB_SQUELCH_PROG_RD_3)
+ & CONFIG_SYS_FSL_USB_SQUELCH_PROG_MASK;
+
+ setbits_be32(&usb_phy->config1,
+ CONFIG_SYS_FSL_USB_HS_DISCNCT_INC);
+ setbits_be32(&usb_phy->config2,
+ CONFIG_SYS_FSL_USB_RX_AUTO_CAL_RD_WR_SEL);
+
+ temp = squelch_prog_rd_0_2 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_0;
+ out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
+
+ temp = squelch_prog_rd_3_5 << CONFIG_SYS_FSL_USB_SQUELCH_PROG_WR_3;
+ out_be32(&usb_phy->config2, in_be32(&usb_phy->config2) | temp);
+#endif
+}
+#endif
+
+
#ifdef CONFIG_QE
extern qe_iop_conf_t qe_iop_conf_tab[];
extern void qe_config_iopin(u8 port, u8 pin, int dir,
#ifdef CONFIG_SYS_FSL_ERRATUM_CPC_A003
setbits_be32(&cpc->cpchdbcr0, CPC_HDBCR0_DATA_ECC_SCRUB_DIS);
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006593
+ setbits_be32(&cpc->cpchdbcr0, 1 << (31 - 21));
+#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006379
+ if (has_erratum_a006379()) {
+ setbits_be32(&cpc->cpchdbcr0,
+ CPC_HDBCR0_SPLRU_LEVEL_EN);
+ }
+#endif
out_be32(&cpc->cpccsr0, CPC_CSR0_CE | CPC_CSR0_PE);
/* Read back to sync write */
}
- printf("Corenet Platform Cache: %d KB enabled\n", size);
+ puts("Corenet Platform Cache: ");
+ print_size(size * 1024, " enabled\n");
}
static void invalidate_cpc(void)
}
__attribute__((weak, alias("__fsl_serdes__init"))) void fsl_serdes_init(void);
-#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
int enable_cluster_l2(void)
{
int i = 0;
/* Look through the remaining clusters, and set up their caches */
do {
+ int j, cluster_valid = 0;
+
l2cache = (void __iomem *)(CONFIG_SYS_FSL_CLUSTER_1_L2 + i * 0x40000);
+
cluster = in_be32(&gur->tp_cluster[i].lower);
- /* set stash ID to (cluster) * 2 + 32 + 1 */
- clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
+ /* check that at least one core/accel is enabled in cluster */
+ for (j = 0; j < 4; j++) {
+ u32 idx = (cluster >> (j*8)) & TP_CLUSTER_INIT_MASK;
+ u32 type = in_be32(&gur->tp_ityp[idx]);
- printf("enable l2 for cluster %d %p\n", i, l2cache);
+ if (type & TP_ITYP_AV)
+ cluster_valid = 1;
+ }
- out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
- while ((in_be32(&l2cache->l2csr0) &
- (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
- ;
- out_be32(&l2cache->l2csr0, L2CSR0_L2E);
+ if (cluster_valid) {
+ /* set stash ID to (cluster) * 2 + 32 + 1 */
+ clrsetbits_be32(&l2cache->l2csr1, 0xff, 32 + i * 2 + 1);
+
+ printf("enable l2 for cluster %d %p\n", i, l2cache);
+
+ out_be32(&l2cache->l2csr0, L2CSR0_L2FI|L2CSR0_L2LFC);
+ while ((in_be32(&l2cache->l2csr0)
+ & (L2CSR0_L2FI|L2CSR0_L2LFC)) != 0)
+ ;
+ out_be32(&l2cache->l2csr0, L2CSR0_L2E|L2CSR0_L2PE|L2CSR0_L2REP_MODE);
+ }
i++;
} while (!(cluster & TP_CLUSTER_EOC));
#endif
#ifdef CONFIG_L2_CACHE
ccsr_l2cache_t *l2cache = (void __iomem *)CONFIG_SYS_MPC85xx_L2_ADDR;
-#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
struct ccsr_cluster_l2 * l2cache = (void __iomem *)CONFIG_SYS_FSL_CLUSTER_1_L2;
#endif
-#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
extern int spin_table_compat;
const char *spin;
#endif
-
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+ ccsr_sec_t __iomem *sec = (void *)CONFIG_SYS_FSL_SEC_ADDR;
+#endif
#if defined(CONFIG_SYS_P4080_ERRATUM_CPU22) || \
defined(CONFIG_SYS_FSL_ERRATUM_NMG_CPU_A011)
/*
sync();
}
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_A005812
+ /*
+ * A-005812 workaround sets bit 32 of SPR 976 for SoCs running
+ * in write shadow mode. Checking DCWS before setting SPR 976.
+ */
+ if (mfspr(L1CSR2) & L1CSR2_DCWS)
+ mtspr(SPRN_HDBCR0, (mfspr(SPRN_HDBCR0) | 0x80000000));
+#endif
-#ifdef CONFIG_PPC_SPINTABLE_COMPATIBLE
+#if defined(CONFIG_PPC_SPINTABLE_COMPATIBLE) && defined(CONFIG_MP)
spin = getenv("spin_table_compat");
if (spin && (*spin == 'n'))
spin_table_compat = 0;
case 0x1:
if (ver == SVR_8540 || ver == SVR_8560 ||
ver == SVR_8541 || ver == SVR_8555) {
- puts("128 KB ");
- /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 Kbyte) */
+ puts("128 KiB ");
+ /* set L2E=1, L2I=1, & L2BLKSZ=1 (128 KiBibyte) */
cache_ctl = 0xc4000000;
} else {
- puts("256 KB ");
+ puts("256 KiB ");
cache_ctl = 0xc0000000; /* set L2E=1, L2I=1, & L2SRAM=0 */
}
break;
case 0x2:
if (ver == SVR_8540 || ver == SVR_8560 ||
ver == SVR_8541 || ver == SVR_8555) {
- puts("256 KB ");
- /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 Kbyte) */
+ puts("256 KiB ");
+ /* set L2E=1, L2I=1, & L2BLKSZ=2 (256 KiBibyte) */
cache_ctl = 0xc8000000;
} else {
- puts ("512 KB ");
+ puts("512 KiB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
}
break;
case 0x3:
- puts("1024 KB ");
+ puts("1024 KiB ");
/* set L2E=1, L2I=1, & L2SRAM=0 */
cache_ctl = 0xc0000000;
break;
if (CONFIG_SYS_INIT_L2CSR0 & L2CSR0_L2E) {
while (!(mfspr(SPRN_L2CSR0) & L2CSR0_L2E))
;
- printf("%d KB enabled\n", (l2cfg0 & 0x3fff) * 64);
+ print_size((l2cfg0 & 0x3fff) * 64 * 1024, " enabled\n");
}
skip_l2:
-#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2)
+#elif defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && defined(CONFIG_E6500)
if (l2cache->l2csr0 & L2CSR0_L2E)
- printf("%d KB enabled\n", (l2cache->l2cfg0 & 0x3fff) * 64);
+ print_size((l2cache->l2cfg0 & 0x3fff) * 64 * 1024,
+ " enabled\n");
enable_cluster_l2();
#else
enable_cpc();
+#ifndef CONFIG_SYS_FSL_NO_SERDES
/* needs to be in ram since code uses global static vars */
fsl_serdes_init();
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_SEC_A003571
+#define MCFGR_AXIPIPE 0x000000f0
+ if (IS_SVR_REV(svr, 1, 0))
+ clrbits_be32(&sec->mcfgr, MCFGR_AXIPIPE);
+#endif
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A005871
+ if (IS_SVR_REV(svr, 1, 0)) {
+ int i;
+ __be32 *p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb004c;
+
+ for (i = 0; i < 12; i++) {
+ p += i + (i > 5 ? 11 : 0);
+ out_be32(p, 0x2);
+ }
+ p = (void __iomem *)CONFIG_SYS_DCSRBAR + 0xb0108;
+ out_be32(p, 0x34);
+ }
+#endif
#ifdef CONFIG_SYS_SRIO
srio_init();
-#ifdef CONFIG_SYS_FSL_SRIO_PCIE_BOOT_MASTER
+#ifdef CONFIG_SRIO_PCIE_BOOT_MASTER
char *s = getenv("bootmaster");
if (s) {
if (!strcmp(s, "SRIO1")) {
#ifdef CONFIG_SYS_FSL_USB1_PHY_ENABLE
{
- ccsr_usb_phy_t *usb_phy1 =
+ struct ccsr_usb_phy __iomem *usb_phy1 =
(void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+ if (has_erratum_a006261())
+ fsl_erratum_a006261_workaround(usb_phy1);
+#endif
out_be32(&usb_phy1->usb_enable_override,
CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
}
#endif
#ifdef CONFIG_SYS_FSL_USB2_PHY_ENABLE
{
- ccsr_usb_phy_t *usb_phy2 =
+ struct ccsr_usb_phy __iomem *usb_phy2 =
(void *)CONFIG_SYS_MPC85xx_USB2_PHY_ADDR;
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+ if (has_erratum_a006261())
+ fsl_erratum_a006261_workaround(usb_phy2);
+#endif
out_be32(&usb_phy2->usb_enable_override,
CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE);
}
#endif
+#ifdef CONFIG_SYS_FSL_ERRATUM_USB14
+ /* On P204x/P304x/P50x0 Rev1.0, USB transmit will result internal
+ * multi-bit ECC errors which has impact on performance, so software
+ * should disable all ECC reporting from USB1 and USB2.
+ */
+ if (IS_SVR_REV(get_svr(), 1, 0)) {
+ struct dcsr_dcfg_regs *dcfg = (struct dcsr_dcfg_regs *)
+ (CONFIG_SYS_DCSRBAR + CONFIG_SYS_DCSR_DCFG_OFFSET);
+ setbits_be32(&dcfg->ecccr1,
+ (DCSR_DCFG_ECC_DISABLE_USB1 |
+ DCSR_DCFG_ECC_DISABLE_USB2));
+ }
+#endif
+
+#if defined(CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE)
+ struct ccsr_usb_phy __iomem *usb_phy =
+ (void *)CONFIG_SYS_MPC85xx_USB1_PHY_ADDR;
+ setbits_be32(&usb_phy->pllprg[1],
+ CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN |
+ CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN |
+ CONFIG_SYS_FSL_USB_PLLPRG2_MFI |
+ CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN);
+ setbits_be32(&usb_phy->port1.ctrl,
+ CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+ setbits_be32(&usb_phy->port1.drvvbuscfg,
+ CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+ setbits_be32(&usb_phy->port1.pwrfltcfg,
+ CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+ setbits_be32(&usb_phy->port2.ctrl,
+ CONFIG_SYS_FSL_USB_CTRL_PHY_EN);
+ setbits_be32(&usb_phy->port2.drvvbuscfg,
+ CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN);
+ setbits_be32(&usb_phy->port2.pwrfltcfg,
+ CONFIG_SYS_FSL_USB_PWRFLT_CR_EN);
+
+#ifdef CONFIG_SYS_FSL_ERRATUM_A006261
+ if (has_erratum_a006261())
+ fsl_erratum_a006261_workaround(usb_phy);
+#endif
+
+#endif /* CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE */
+
#ifdef CONFIG_FMAN_ENET
fman_enet_init();
#endif
projects / karo-tx-uboot.git / blobdiff