/*
- * Copyright 2004, 2007 Freescale Semiconductor.
+ * Copyright 2004, 2007, 2011 Freescale Semiconductor.
* Srikanth Srinivasan <srikanth.srinivaan@freescale.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
/* U-Boot - Startup Code for 86xx PowerPC based Embedded Boards
* board_init lies at a quite high address and when the cpu has
* jumped there, everything is ok.
*/
+#include <asm-offsets.h>
#include <config.h>
#include <mpc86xx.h>
-#include <timestamp.h>
#include <version.h>
#include <ppc_asm.tmpl>
#include <asm/cache.h>
#include <asm/mmu.h>
-
-#ifndef CONFIG_IDENT_STRING
-#define CONFIG_IDENT_STRING ""
-#endif
+#include <asm/u-boot.h>
/*
* Need MSR_DR | MSR_IR enabled to access I/O (printf) in exceptions
GOT_ENTRY(transfer_to_handler)
GOT_ENTRY(__init_end)
- GOT_ENTRY(_end)
+ GOT_ENTRY(__bss_end)
GOT_ENTRY(__bss_start)
END_GOT
.long 0x27051956 /* U-Boot Magic Number */
.globl version_string
version_string:
- .ascii U_BOOT_VERSION
- .ascii " (", U_BOOT_DATE, " - ", U_BOOT_TIME, ")"
- .ascii CONFIG_IDENT_STRING, "\0"
+ .ascii U_BOOT_VERSION_STRING, "\0"
. = EXC_OFF_SYS_RESET
.globl _start
/* bl l2cache_enable */
/* run 1st part of board init code (from Flash) */
+ li r3, 0 /* clear boot_flag for calling board_init_f */
bl board_init_f
sync
sync
blr
+#define CONFIG_BAT_PAIR(n) \
+ lis r4, CONFIG_SYS_IBAT##n##L@h; \
+ ori r4, r4, CONFIG_SYS_IBAT##n##L@l; \
+ lis r3, CONFIG_SYS_IBAT##n##U@h; \
+ ori r3, r3, CONFIG_SYS_IBAT##n##U@l; \
+ mtspr IBAT##n##L, r4; \
+ mtspr IBAT##n##U, r3; \
+ lis r4, CONFIG_SYS_DBAT##n##L@h; \
+ ori r4, r4, CONFIG_SYS_DBAT##n##L@l; \
+ lis r3, CONFIG_SYS_DBAT##n##U@h; \
+ ori r3, r3, CONFIG_SYS_DBAT##n##U@l; \
+ mtspr DBAT##n##L, r4; \
+ mtspr DBAT##n##U, r3;
+
+/*
+ * setup_bats:
+ *
+ * Set up the final BAT registers now that setup is done.
+ *
+ * Assumes that:
+ * 1) Address translation is enabled upon entry
+ * 2) The boot rom is still accessible via 1:1 translation
+ */
+ .globl setup_bats
+setup_bats:
+ mflr r5
+ sync
+
+ /*
+ * When we disable address translation, we will get 1:1 (VA==PA)
+ * translation. The only place we know for sure is safe for that is
+ * the bootrom where we originally started out. Pop back into there.
+ */
+ lis r4, CONFIG_SYS_MONITOR_BASE_EARLY@h
+ ori r4, r4, CONFIG_SYS_MONITOR_BASE_EARLY@l
+ addi r4, r4, trans_disabled - _start + EXC_OFF_SYS_RESET
+
+ /* disable address translation */
+ mfmsr r3
+ rlwinm r3, r3, 0, 28, 25
+ mtspr SRR0, r4
+ mtspr SRR1, r3
+ rfi
+
+trans_disabled:
+#if defined(CONFIG_SYS_DBAT0U) && defined(CONFIG_SYS_DBAT0L) \
+ && defined(CONFIG_SYS_IBAT0U) && defined(CONFIG_SYS_IBAT0L)
+ CONFIG_BAT_PAIR(0)
+#endif
+ CONFIG_BAT_PAIR(1)
+ CONFIG_BAT_PAIR(2)
+ CONFIG_BAT_PAIR(3)
+ CONFIG_BAT_PAIR(4)
+ CONFIG_BAT_PAIR(5)
+ CONFIG_BAT_PAIR(6)
+ CONFIG_BAT_PAIR(7)
+
+ sync
+ isync
+
+ /* Turn translation back on and return */
+ mfmsr r3
+ ori r3, r3, (MSR_IR | MSR_DR)
+ mtspr SPRN_SRR0,r5
+ mtspr SPRN_SRR1,r3
+ rfi
+
/*
* early_bats:
*
beq 4f
3: lwzu r4,4(r3)
lwzux r0,r4,r11
+ cmpwi r0,0
add r0,r0,r11
- stw r10,0(r3)
+ stw r4,0(r3)
+ beq- 5f
stw r0,0(r4)
- bdnz 3b
+5: bdnz 3b
4:
/* clear_bss: */
/*
* Now clear BSS segment
*/
lwz r3,GOT(__bss_start)
- lwz r4,GOT(_end)
+ lwz r4,GOT(__bss_end)
cmplw 0, r3, r4
beq 6f
*/
lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+ li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
(CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
mtctr r4
1:
/* invalidate the INIT_RAM section */
lis r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@h
ori r3, r3, (CONFIG_SYS_INIT_RAM_ADDR & ~31)@l
- li r4, ((CONFIG_SYS_INIT_RAM_END & ~31) + \
+ li r4, ((CONFIG_SYS_INIT_RAM_SIZE & ~31) + \
(CONFIG_SYS_INIT_RAM_ADDR & 31) + 31) / 32
mtctr r4
1: icbi r0, r3
projects / karo-tx-uboot.git / blobdiff