* board_init will change CS0 to be positioned at the correct
* address and (s)dram will be positioned at address 0
*/
+#include <asm-offsets.h>
#include <config.h>
#include <mpc8xx.h>
#include <timestamp.h>
#include <asm/cache.h>
#include <asm/mmu.h>
+#include <asm/u-boot.h>
#ifndef CONFIG_IDENT_STRING
#define CONFIG_IDENT_STRING ""
_start:
lis r3, CONFIG_SYS_IMMR@h /* position IMMR */
mtspr 638, r3
- li r21, BOOTFLAG_COLD /* Normal Power-On: Boot from FLASH */
- b boot_cold
-
- . = EXC_OFF_SYS_RESET + 0x10
-
- .globl _start_warm
-_start_warm:
- li r21, BOOTFLAG_WARM /* Software reboot */
- b boot_warm
-
-boot_cold:
-boot_warm:
/* Initialize machine status; enable machine check interrupt */
/*----------------------------------------------------------------------*/
/* r3: IMMR */
bl cpu_init_f /* run low-level CPU init code (from Flash) */
- mr r3, r21
- /* r3: BOOTFLAG */
bl board_init_f /* run 1st part of board init code (from Flash) */
+ /* NOTREACHED - board_init_f() does not return */
+
.globl _start_of_vectors
_start_of_vectors:
beq 4f
3: lwzu r4,4(r3)
lwzux r0,r4,r11
+ cmpwi r0,0
add r0,r0,r11
- stw r10,0(r3)
+ stw r4,0(r3)
+ beq- 5f
stw r0,0(r4)
- bdnz 3b
+5: bdnz 3b
4:
clear_bss:
/*