};
#endif
+#ifdef CONFIG_SYS_FSL_SRIO_LIODN
+struct rio_liodn {
+ u32 plbr;
+ u8 res0[28];
+ u32 plaor;
+ u8 res1[12];
+ u32 pludr;
+ u32 plldr;
+ u8 res2[456];
+};
+#endif
+
/* RapidIO Registers */
struct ccsr_rio {
struct rio_arch arch;
u8 res7[100];
struct rio_pw pw;
#endif
+#ifdef CONFIG_SYS_FSL_SRIO_LIODN
+ u8 res5[8192];
+ struct rio_liodn liodn[CONFIG_SYS_FSL_SRIO_MAX_PORTS];
+#endif
};
#endif
#define CPC_HDBCR0_CDQ_SPEC_DIS 0x08000000
#define CPC_HDBCR0_TAG_ECC_SCRUB_DIS 0x01000000
#define CPC_HDBCR0_DATA_ECC_SCRUB_DIS 0x00400000
+#define CPC_HDBCR0_SPLRU_LEVEL_EN 0x003c0000
#endif /* CONFIG_SYS_FSL_CPC */
/* Global Utilities Block */
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00ff0000
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL_SHIFT 16
#define FSL_CORENET_RCWSR6_BOOT_LOC 0x0f800000
-#elif defined(CONFIG_PPC_T1040)
+#elif defined(CONFIG_PPC_T1040) || defined(CONFIG_PPC_T1042) ||\
+defined(CONFIG_PPC_T1020) || defined(CONFIG_PPC_T1022)
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000
u8 res_004[0x0c];
u32 clkcgnhwacsr;/* clock generator n hardware accelerator */
u8 res_014[0x0c];
- } clkcsr[8];
- u8 res_100[0x700]; /* 0x100 */
- u32 pllc1gsr; /* 0x800 Cluster PLL 1 General Status */
- u8 res10[0x1c];
- u32 pllc2gsr; /* 0x820 Cluster PLL 2 General Status */
- u8 res11[0x1c];
- u32 pllc3gsr; /* 0x840 Cluster PLL 3 General Status */
- u8 res12[0x1c];
- u32 pllc4gsr; /* 0x860 Cluster PLL 4 General Status */
- u8 res13[0x1c];
- u32 pllc5gsr; /* 0x880 Cluster PLL 5 General Status */
- u8 res14[0x1c];
- u32 pllc6gsr; /* 0x8a0 Cluster PLL 6 General Status */
- u8 res15[0x35c];
+ } clkcsr[12];
+ u8 res_100[0x680]; /* 0x100 */
+ struct {
+ u32 pllcngsr;
+ u8 res10[0x1c];
+ } pllcgsr[12];
+ u8 res21[0x280];
u32 pllpgsr; /* 0xc00 Platform PLL General Status */
u8 res16[0x1c];
u32 plldgsr; /* 0xc20 DDR PLL General Status */
#ifdef CONFIG_MPC8536
#define MPC85xx_PORPLLSR_DDR_RATIO 0x3e000000
#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT 25
+#elif defined(CONFIG_PPC_C29X)
+#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00
+#define MPC85xx_PORPLLSR_DDR_RATIO_SHIFT (9 - ((gur->pordevsr2 \
+ & MPC85xx_PORDEVSR2_DDR_SPD_0) \
+ >> MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT))
#else
#if defined(CONFIG_BSC9131) || defined(CONFIG_BSC9132)
#define MPC85xx_PORPLLSR_DDR_RATIO 0x00003f00
#elif defined(CONFIG_BSC9132)
#define MPC85xx_PORDEVSR_IO_SEL 0x00FE0000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 17
+#elif defined(CONFIG_PPC_C29X)
+#define MPC85xx_PORDEVSR_IO_SEL 0x00e00000
+#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 21
#else
#define MPC85xx_PORDEVSR_IO_SEL 0x00780000
#define MPC85xx_PORDEVSR_IO_SEL_SHIFT 19
#define MPC85xx_PORDEVSR_RIO_DEV_ID 0x00000007
u32 pordbgmsr; /* POR debug mode status */
u32 pordevsr2; /* POR I/O device status 2 */
+#if defined(CONFIG_PPC_C29X)
+#define MPC85xx_PORDEVSR2_DDR_SPD_0 0x00000008
+#define MPC85xx_PORDEVSR2_DDR_SPD_0_SHIFT 3
+#endif
/* The 8544 RM says this is bit 26, but it's really bit 24 */
#define MPC85xx_PORDEVSR2_SEC_CFG 0x00000080
u8 res1[8];
#ifdef CONFIG_BSC9132
#define MPC85xx_PMUXCR0_SIM_SEL_MASK 0x0003b000
#define MPC85xx_PMUXCR0_SIM_SEL 0x00014000
+#endif
+#if defined(CONFIG_PPC_C29X)
+#define MPC85xx_PMUXCR_SPI_MASK 0x00000300
+#define MPC85xx_PMUXCR_SPI 0x00000000
+#define MPC85xx_PMUXCR_SPI_GPIO 0x00000100
#endif
u32 pmuxcr2; /* Alt. function signal multiplex control 2 */
#if defined(CONFIG_P1010) || defined(CONFIG_P1014)
#define SRDS_RSTCTL_RSTDONE 0x40000000
#define SRDS_RSTCTL_RSTERR 0x20000000
#define SRDS_RSTCTL_SWRST 0x10000000
-#define SRDS_RSTCTL_SDPD 0x00000020
+#define SRDS_RSTCTL_SDEN 0x00000020
+#define SRDS_RSTCTL_SDRST_B 0x00000040
+#define SRDS_RSTCTL_PLLRST_B 0x00000080
u32 pllcr0; /* PLL Control Register 0 */
#define SRDS_PLLCR0_POFF 0x80000000
#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
u8 res4[0x400];
} ccsr_pme_t;
-#ifdef CONFIG_SYS_FSL_USB_DUAL_PHY_ENABLE
-struct ccsr_usb_port_ctrl {
- u32 ctrl;
- u32 drvvbuscfg;
- u32 pwrfltcfg;
- u32 sts;
- u8 res_14[0xc];
- u32 bistcfg;
- u32 biststs;
- u32 abistcfg;
- u32 abiststs;
- u8 res_30[0x10];
- u32 xcvrprg;
- u32 anaprg;
- u32 anadrv;
- u32 anasts;
-};
-
-typedef struct ccsr_usb_phy {
- u32 id;
- struct ccsr_usb_port_ctrl port1;
- u8 res_50[0xc];
- u32 tvr;
- u32 pllprg[4];
- u8 res_70[0x4];
- u32 anaccfg;
- u32 dbg;
- u8 res_7c[0x4];
- struct ccsr_usb_port_ctrl port2;
- u8 res_dc[0x334];
-} ccsr_usb_phy_t;
-
-#define CONFIG_SYS_FSL_USB_CTRL_PHY_EN (1 << 0)
-#define CONFIG_SYS_FSL_USB_DRVVBUS_CR_EN (1 << 1)
-#define CONFIG_SYS_FSL_USB_PWRFLT_CR_EN (1 << 1)
-#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY2_CLK_EN (1 << 0)
-#define CONFIG_SYS_FSL_USB_PLLPRG2_PHY1_CLK_EN (1 << 1)
-#define CONFIG_SYS_FSL_USB_PLLPRG2_MFI (5 << 16)
-#define CONFIG_SYS_FSL_USB_PLLPRG2_PLL_EN (1 << 21)
-#else
-typedef struct ccsr_usb_phy {
- u8 res0[0x18];
- u32 usb_enable_override;
- u8 res[0xe4];
-} ccsr_usb_phy_t;
-#define CONFIG_SYS_FSL_USB_ENABLE_OVERRIDE 1
-#endif
-
#ifdef CONFIG_SYS_FSL_RAID_ENGINE
struct ccsr_raide {
u8 res0[0x543];
#endif
#define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x210000
#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x211000
-#define CONFIG_SYS_MPC85xx_USB_OFFSET CONFIG_SYS_MPC85xx_USB1_OFFSET
#define CONFIG_SYS_MPC85xx_USB1_PHY_OFFSET 0x214000
#define CONFIG_SYS_MPC85xx_USB2_PHY_OFFSET 0x214100
#define CONFIG_SYS_MPC85xx_SATA1_OFFSET 0x220000
#define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x1e000
#define CONFIG_SYS_MPC85xx_L2_OFFSET 0x20000
#define CONFIG_SYS_MPC85xx_DMA_OFFSET 0x21000
-#define CONFIG_SYS_MPC85xx_USB_OFFSET 0x22000
+#define CONFIG_SYS_MPC85xx_USB1_OFFSET 0x22000
#define CONFIG_SYS_MPC85xx_USB2_OFFSET 0x23000
#ifdef CONFIG_TSECV2
#define CONFIG_SYS_TSEC1_OFFSET 0xB0000
+#elif defined(CONFIG_TSECV2_1)
+#define CONFIG_SYS_TSEC1_OFFSET 0x10000
#else
#define CONFIG_SYS_TSEC1_OFFSET 0x24000
#endif
#define CONFIG_SYS_MDIO1_OFFSET 0x24000
#define CONFIG_SYS_MPC85xx_ESDHC_OFFSET 0x2e000
+#if defined(CONFIG_PPC_C29X)
+#define CONFIG_SYS_FSL_SEC_OFFSET 0x80000
+#else
#define CONFIG_SYS_FSL_SEC_OFFSET 0x30000
+#endif
#define CONFIG_SYS_MPC85xx_SERDES2_OFFSET 0xE3100
#define CONFIG_SYS_MPC85xx_SERDES1_OFFSET 0xE3000
#define CONFIG_SYS_SNVS_OFFSET 0xE6000
#define CONFIG_SYS_MPC85xx_GUTS_OFFSET 0xE0000
#define CONFIG_SYS_FSL_SRIO_OFFSET 0xC0000
+#if defined(CONFIG_BSC9132)
+#define CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET 0x10000
+#define CONFIG_SYS_FSL_DSP_CCSR_DDR_ADDR \
+ (CONFIG_SYS_FSL_DSP_CCSRBAR + CONFIG_SYS_FSL_DSP_CCSR_DDR_OFFSET)
+#endif
+
#define CONFIG_SYS_FSL_CPC_ADDR \
(CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET)
#define CONFIG_SYS_FSL_QMAN_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES_OFFSET)
#define CONFIG_SYS_FSL_CORENET_SERDES2_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET)
-#define CONFIG_SYS_MPC85xx_USB_ADDR \
- (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB_OFFSET)
+#define CONFIG_SYS_MPC85xx_USB1_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB1_OFFSET)
+#define CONFIG_SYS_MPC85xx_USB2_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB2_OFFSET)
#define CONFIG_SYS_MPC85xx_USB1_PHY_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_USB1_PHY_OFFSET)
#define CONFIG_SYS_MPC85xx_USB2_PHY_ADDR \
projects / karo-tx-uboot.git / blobdiff