typedef struct ccsr_gur {
u32 porsr1; /* POR status 1 */
u32 porsr2; /* POR status 2 */
+#ifdef CONFIG_SYS_FSL_SINGLE_SOURCE_CLK
+#define FSL_DCFG_PORSR1_SYSCLK_SHIFT 15
+#define FSL_DCFG_PORSR1_SYSCLK_MASK 0x1
+#define FSL_DCFG_PORSR1_SYSCLK_SINGLE_ENDED 0x1
+#define FSL_DCFG_PORSR1_SYSCLK_DIFF 0x0
+#endif
u8 res_008[0x20-0x8];
u32 gpporcr1; /* General-purpose POR configuration */
u32 gpporcr2; /* General-purpose POR configuration 2 */
u32 rstrqpblsr; /* Reset request preboot loader status */
u8 res11[8];
u32 rstrqmr1; /* Reset request mask */
+#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
+#define FSL_CORENET_RSTRQMR1_SRDS_RST_MSK 0x00000800
+#endif
u8 res12[4];
u32 rstrqsr1; /* Reset request status */
u8 res13[4];
#ifdef CONFIG_SYS_FSL_QORIQ_CHASSIS2
#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_SHIFT 16
+/* use reserved bits 18~23 as scratch space to host DDR PLL ratio */
+#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_RESV_SHIFT 8
#define FSL_CORENET_RCWSR0_MEM_PLL_RAT_MASK 0x3f
-#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
+#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \
+ defined(CONFIG_PPC_T4080)
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xfc000000
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 26
#define FSL_CORENET2_RCWSR4_SRDS2_PRTCL 0x00fe0000
#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL 0x00000080
#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL_L2_SWITCH 0x00000000
#define FSL_CORENET_RCWSR13_MAC2_GMII_SEL_ENET_PORT 0x80000000
+#define CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET 0x28
+#define PXCKEN_MASK 0x80000000
+#define PXCK_MASK 0x00FF0000
+#define PXCK_BITS_START 16
#elif defined(CONFIG_PPC_T2080) || defined(CONFIG_PPC_T2081)
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL 0xff000000
#define FSL_CORENET2_RCWSR4_SRDS1_PRTCL_SHIFT 24
#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_MII 0x00100000
#define FSL_CORENET_RCWSR11_EC2_FM2_DTSEC5_NONE 0x00180000
#endif
-#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160)
+#if defined(CONFIG_PPC_T4240) || defined(CONFIG_PPC_T4160) || \
+ defined(CONFIG_PPC_T4080)
#define FSL_CORENET_RCWSR13_EC1 0x60000000 /* bits 417..418 */
#define FSL_CORENET_RCWSR13_EC1_FM2_DTSEC5_RGMII 0x00000000
#define FSL_CORENET_RCWSR13_EC1_FM2_GPIO 0x40000000
u32 sata2liodnr; /* SATA 2 LIODN */
u32 sata3liodnr; /* SATA 3 LIODN */
u32 sata4liodnr; /* SATA 4 LIODN */
- u8 res22[32];
+ u8 res22[20];
+ u32 tdmliodnr; /* TDM LIODN */
+ u32 qeliodnr; /* QE LIODN */
+ u8 res_57c[4];
u32 dma1liodnr; /* DMA 1 LIODN */
u32 dma2liodnr; /* DMA 2 LIODN */
u32 dma3liodnr; /* DMA 3 LIODN */
#define SRDS_RSTCTL_SDEN 0x00000020
#define SRDS_RSTCTL_SDRST_B 0x00000040
#define SRDS_RSTCTL_PLLRST_B 0x00000080
+#define SRDS_RSTCTL_RSTERR_SHIFT 29
u32 pllcr0; /* PLL Control Register 0 */
#define SRDS_PLLCR0_POFF 0x80000000
#define SRDS_PLLCR0_RFCK_SEL_MASK 0x70000000
#define SRDS_PLLCR0_RFCK_SEL_150 0x30000000
#define SRDS_PLLCR0_RFCK_SEL_161_13 0x40000000
#define SRDS_PLLCR0_RFCK_SEL_122_88 0x50000000
+#define SRDS_PLLCR0_PLL_LCK 0x00800000
+#define SRDS_PLLCR0_DCBIAS_OUT_EN 0x02000000
#define SRDS_PLLCR0_FRATE_SEL_MASK 0x000f0000
#define SRDS_PLLCR0_FRATE_SEL_5 0x00000000
+#define SRDS_PLLCR0_FRATE_SEL_4_9152 0x00030000
#define SRDS_PLLCR0_FRATE_SEL_3_75 0x00050000
#define SRDS_PLLCR0_FRATE_SEL_5_15 0x00060000
#define SRDS_PLLCR0_FRATE_SEL_4 0x00070000
-#define SRDS_PLLCR0_FRATE_SEL_3_12 0x00090000
-#define SRDS_PLLCR0_FRATE_SEL_3 0x000a0000
+#define SRDS_PLLCR0_FRATE_SEL_3_125 0x00090000
+#define SRDS_PLLCR0_FRATE_SEL_3_0 0x000a0000
+#define SRDS_PLLCR0_FRATE_SEL_3_072 0x000c0000
+#define SRDS_PLLCR0_DCBIAS_OVRD 0x000000F0
+#define SRDS_PLLCR0_DCBIAS_OVRD_SHIFT 4
u32 pllcr1; /* PLL Control Register 1 */
-#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
- u32 res_0c; /* 0x00c */
+#define SRDS_PLLCR1_BCAP_EN 0x20000000
+#define SRDS_PLLCR1_BCAP_OVD 0x10000000
+#define SRDS_PLLCR1_PLL_FCAP 0x001F8000
+#define SRDS_PLLCR1_PLL_FCAP_SHIFT 15
+#define SRDS_PLLCR1_PLL_BWSEL 0x08000000
+#define SRDS_PLLCR1_BYP_CAL 0x02000000
+ u32 pllsr2; /* At 0x00c, PLL Status Register 2 */
+#define SRDS_PLLSR2_BCAP_EN 0x00800000
+#define SRDS_PLLSR2_BCAP_EN_SHIFT 23
+#define SRDS_PLLSR2_FCAP 0x003F0000
+#define SRDS_PLLSR2_FCAP_SHIFT 16
+#define SRDS_PLLSR2_DCBIAS 0x000F0000
+#define SRDS_PLLSR2_DCBIAS_SHIFT 16
u32 pllcr3;
u32 pllcr4;
u8 res_18[0x20-0x18];
u8 res_f4[0xf0c];
};
#endif
+#ifdef CONFIG_SYS_FSL_SFP_VER_3_0
+struct ccsr_sfp_regs {
+ u32 ospr; /* 0x200 */
+ u32 reserved0[14];
+ u32 srk_hash[8]; /* 0x23c Super Root Key Hash */
+ u32 oem_uid; /* 0x9c OEM Unique ID */
+ u8 reserved2[0x04];
+ u32 ovpr; /* 0xA4 Intent To Secure */
+ u8 reserved4[0x08];
+ u32 fsl_uid; /* 0xB0 FSL Unique ID */
+ u8 reserved5[0x04];
+ u32 fsl_spfr0; /* Scratch Pad Fuse Register 0 */
+ u32 fsl_spfr1; /* Scratch Pad Fuse Register 1 */
+};
+#endif
#ifdef CONFIG_FSL_CORENET
#define CONFIG_SYS_FSL_CORENET_CCM_OFFSET 0x0000
#define CONFIG_SYS_MPC8xxx_DDR3_OFFSET 0xA000
#define CONFIG_SYS_FSL_CORENET_CLK_OFFSET 0xE1000
#define CONFIG_SYS_FSL_CORENET_RCPM_OFFSET 0xE2000
+#ifdef CONFIG_SYS_FSL_SFP_VER_3_0
+/* In SFPv3, OSPR register is now at offset 0x200.
+ * * So directly mapping sfp register map to this address */
+#define CONFIG_SYS_OSPR_OFFSET 0x200
+#define CONFIG_SYS_SFP_OFFSET (0xE8000 + CONFIG_SYS_OSPR_OFFSET)
+#else
+#define CONFIG_SYS_SFP_OFFSET 0xE8000
+#endif
#define CONFIG_SYS_FSL_CORENET_SERDES_OFFSET 0xEA000
#define CONFIG_SYS_FSL_CORENET_SERDES2_OFFSET 0xEB000
#define CONFIG_SYS_FSL_CPC_OFFSET 0x10000
+#define CONFIG_SYS_FSL_SCFG_OFFSET 0xFC000
#define CONFIG_SYS_MPC85xx_DMA1_OFFSET 0x100000
#define CONFIG_SYS_MPC85xx_DMA2_OFFSET 0x101000
#define CONFIG_SYS_MPC85xx_DMA3_OFFSET 0x102000
#define CONFIG_SYS_MPC85xx_LBC_OFFSET 0x124000
#define CONFIG_SYS_MPC85xx_IFC_OFFSET 0x124000
#define CONFIG_SYS_MPC85xx_GPIO_OFFSET 0x130000
+#define CONFIG_SYS_MPC85xx_TDM_OFFSET 0x185000
+#define CONFIG_SYS_MPC85xx_QE_OFFSET 0x140000
#define CONFIG_SYS_FSL_CORENET_RMAN_OFFSET 0x1e0000
#if defined(CONFIG_SYS_FSL_QORIQ_CHASSIS2) && !defined(CONFIG_PPC_B4860)\
&& !defined(CONFIG_PPC_B4420)
#define CONFIG_SYS_FSL_CPC_ADDR \
(CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_CPC_OFFSET)
+#define CONFIG_SYS_FSL_SCFG_ADDR \
+ (CONFIG_SYS_CCSRBAR + CONFIG_SYS_FSL_SCFG_OFFSET)
+#define CONFIG_SYS_FSL_SCFG_PIXCLK_ADDR \
+ (CONFIG_SYS_FSL_SCFG_ADDR + CONFIG_SYS_FSL_SCFG_PIXCLKCR_OFFSET)
#define CONFIG_SYS_FSL_QMAN_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_FSL_QMAN_OFFSET)
#define CONFIG_SYS_FSL_BMAN_ADDR \
#define CONFIG_SYS_PCIE4_ADDR \
(CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_PCIE4_OFFSET)
+#define CONFIG_SYS_SFP_ADDR \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_SFP_OFFSET)
+
#define TSEC_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_TSEC1_OFFSET)
#define MDIO_BASE_ADDR (CONFIG_SYS_IMMR + CONFIG_SYS_MDIO1_OFFSET)
#define DCSR_DCFG_ECC_DISABLE_USB2 0x00004000
u8 res_524[0x1000 - 0x524]; /* 0x524 - 0x1000 */
};
+
+#define CONFIG_SYS_MPC85xx_SCFG \
+ (CONFIG_SYS_IMMR + CONFIG_SYS_MPC85xx_SCFG_OFFSET)
+#define CONFIG_SYS_MPC85xx_SCFG_OFFSET 0xfc000
+/* The supplement configuration unit register */
+struct ccsr_scfg {
+ u32 dpslpcr; /* 0x000 Deep Sleep Control register */
+ u32 usb1dpslpcsr;/* 0x004 USB1 Deep Sleep Control Status register */
+ u32 usb2dpslpcsr;/* 0x008 USB2 Deep Sleep Control Status register */
+ u32 fmclkdpslpcr;/* 0x00c FM Clock Deep Sleep Control register */
+ u32 res1[4];
+ u32 esgmiiselcr;/* 0x020 Ethernet Switch SGMII Select Control reg */
+ u32 res2;
+ u32 pixclkcr; /* 0x028 Pixel Clock Control register */
+ u32 res3[245];
+ u32 qeioclkcr; /* 0x400 QUICC Engine IO Clock Control register */
+ u32 emiiocr; /* 0x404 EMI MDIO Control Register */
+ u32 sdhciovselcr;/* 0x408 SDHC IO VSEL Control register */
+ u32 qmifrstcr; /* 0x40c QMAN Interface Reset Control register */
+ u32 res4[60];
+ u32 sparecr[8]; /* 0x500 Spare Control register(0-7) */
+};
#endif /*__IMMAP_85xx__*/
projects / karo-tx-uboot.git / blobdiff