powerpc/mpc85xx: Define PBI Flash Base for C29XPCIE Secure Boot

[karo-tx-uboot.git] / arch / powerpc / include / asm / ppc4xx-sdram.h

diff --git a/arch/powerpc/include/asm/ppc4xx-sdram.h b/arch/powerpc/include/asm/ppc4xx-sdram.h
index e35d9b677a79ee95d4a3db86a6da5dfe2c0cb405..e6fed83bf1cf2101fbd3df861279aea6543f2222 100644 (file)
--- a/arch/powerpc/include/asm/ppc4xx-sdram.h
+++ b/arch/powerpc/include/asm/ppc4xx-sdram.h
@@ -2,23 +2,7 @@
  * (C) Copyright 2008
  * Stefan Roese, DENX Software Engineering, sr@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #ifndef _PPC4xx_SDRAM_H_
@@ -292,7 +276,7 @@
  */
 #if defined(CONFIG_440SPE) || \
     defined(CONFIG_460EX) || defined(CONFIG_460GT) || \
-    defined(CONFIG_460SX) || defined(CONFIG_APM821XX)
+    defined(CONFIG_460SX)
 #define SDRAM_RXBAS_SDBA_MASK          0xFFE00000      /* Base address */
 #define SDRAM_RXBAS_SDBA_ENCODE(n)     ((u32)(((phys_size_t)(n) >> 2) & 0xFFE00000))
 #define SDRAM_RXBAS_SDBA_DECODE(n)     ((((phys_size_t)(n)) & 0xFFE00000) << 2)
@@ -365,7 +349,7 @@
 /*
  * Memory controller registers
  */
-#if defined(CONFIG_405EX) || defined(CONFIG_APM821XX)
+#if defined(CONFIG_405EX)
 #define SDRAM_BESR     0x00    /* PLB bus error status (read/clear)         */
 #define SDRAM_BESRT    0x01    /* PLB bus error status (test/set)           */
 #define SDRAM_BEARL    0x02    /* PLB bus error address low                 */
@@ -375,9 +359,9 @@
 #define SDRAM_PLBOPT   0x08    /* PLB slave options                         */
 #define SDRAM_PUABA    0x09    /* PLB upper address base                    */
 #define SDRAM_MCSTAT   0x1F    /* memory controller status                  */
-#else /* CONFIG_405EX || CONFIG_APM821XX */
+#else /* CONFIG_405EX */
 #define SDRAM_MCSTAT   0x14    /* memory controller status                  */
-#endif /* CONFIG_405EX || CONFIG_APM821XX */
+#endif /* CONFIG_405EX */
 #define SDRAM_MCOPT1   0x20    /* memory controller options 1               */
 #define SDRAM_MCOPT2   0x21    /* memory controller options 2               */
 #define SDRAM_MODT0    0x22    /* on die termination for bank 0             */
@@ -423,12 +407,12 @@
 #define SDRAM_MEMODE   0x89    /* memory extended mode                      */
 #define SDRAM_ECCES    0x98    /* ECC error status                          */
 #define SDRAM_CID      0xA4    /* core ID                                   */
-#if !defined(CONFIG_405EX) && !defined(CONFIG_APM821XX)
+#if !defined(CONFIG_405EX)
 #define SDRAM_RID      0xA8    /* revision ID                               */
 #endif
 #define SDRAM_FCSR     0xB0    /* feedback calibration status               */
 #define SDRAM_RTSR     0xB1    /* run time status tracking                  */
-#if  defined(CONFIG_405EX) || defined(CONFIG_APM821XX)
+#if  defined(CONFIG_405EX)
 #define SDRAM_RID      0xF8    /* revision ID                               */
 #endif