Update from 2013.01 to 2013.07

[karo-tx-uboot.git] / board / boundary / nitrogen6x / 6x_bootscript_android_recovery.txt

diff --git a/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt b/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
new file mode 100644 (file)
index 0000000..0982cf8
--- /dev/null
+++ b/board/boundary/nitrogen6x/6x_bootscript_android_recovery.txt
@@ -0,0 +1,64 @@
+${dtype} dev ${disk}
+
+setenv bootargs enable_wait_mode=off
+setenv nextcon 0;
+setenv bootargs $bootargs console=ttymxc1,115200 vmalloc=400M consoleblank=0 ;
+
+i2c dev 2
+
+if i2c probe 0x04 ; then
+       setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,LDB-XGA,if=RGB666
+       if test "0" -eq $nextcon; then
+               setenv fbcon "fbcon=10M";
+       else
+               setenv fbcon ${fbcon},10M
+       fi
+       setexpr nextcon $nextcon + 1
+else
+       echo "------ no Freescale display";
+fi
+
+if i2c probe 0x38 ; then
+       setenv bootargs $bootargs video=mxcfb${nextcon}:dev=ldb,1024x600M@60,if=RGB666
+       if test "0" -eq $nextcon; then
+               setenv fbcon "fbcon=10M";
+       else
+               setenv fbcon ${fbcon},10M
+       fi
+       setexpr nextcon $nextcon + 1
+else
+       echo "------ no 1024x600 display";
+fi
+
+if i2c probe 0x48 ; then
+       setenv bootargs $bootargs video=mxcfb${nextcon}:dev=lcd,CLAA-WVGA,if=RGB666 tsdev=tsc2004 calibration
+       if test "0" -eq $nextcon; then
+               setenv fbcon "fbcon=10M";
+       else
+               setenv fbcon ${fbcon},10M
+       fi
+       setexpr nextcon $nextcon + 1
+else
+       echo "------ no 800x480 display";
+fi
+
+if hdmidet ; then
+       setenv bootargs $bootargs video=mxcfb${nextcon}:dev=hdmi,1280x720M@60,if=RGB24
+       if test "0" -eq $nextcon; then
+               setenv fbcon "fbcon=28M";
+       else
+               setenv fbcon ${fbcon},28M
+       fi
+       setexpr nextcon $nextcon + 1
+else
+       echo "------ no HDMI monitor";
+fi
+
+while test "3" -ne $nextcon ; do
+       setenv bootargs $bootargs video=mxcfb${nextcon}:off ;
+       setexpr nextcon $nextcon + 1 ;
+done
+
+setenv bootargs $bootargs fbcon=$fbcon
+${fs}load ${dtype} ${disk}:1 10800000 uImage && ${fs}load ${dtype} ${disk}:1 12800000 uramdisk.img && bootm 10800000 12800000
+echo "Error loading kernel image"