* (C) Copyright 2001
* Rob Taylor, Flying Pig Systems. robt@flyingpig.com.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/io.h>
#include <pci.h>
#include <i2c.h>
+#include <netdev.h>
int sysControlDisplay(int digit, uchar ascii_code);
extern void Plx9030Init(void);
return 0;
}
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
{
int m, row, col, bank, i, ref;
unsigned long start, end;
uint8_t mber = 0;
unsigned int tmp;
- i2c_init(CFG_I2C_SPEED, CFG_I2C_SLAVE);
+ i2c_init(CONFIG_SYS_I2C_SPEED, CONFIG_SYS_I2C_SLAVE);
if (i2c_reg_read (0x50, 2) != 0x04)
return 0; /* Memory type */
CONFIG_READ_WORD(MCCR2, mccr2);
mccr2 &= 0xffff0000;
- start = CFG_SDRAM_BASE;
+ start = CONFIG_SYS_SDRAM_BASE;
end = start + (1 << (col + row + 3) ) * bank - 1;
for (i = 0; i < m; i++) {
#if defined(CONFIG_CMD_PCMCIA)
-#ifdef CFG_PCMCIA_MEM_ADDR
-volatile unsigned char *pcmcia_mem = (unsigned char*)CFG_PCMCIA_MEM_ADDR;
+#ifdef CONFIG_SYS_PCMCIA_MEM_ADDR
+volatile unsigned char *pcmcia_mem = (unsigned char*)CONFIG_SYS_PCMCIA_MEM_ADDR;
#endif
int pcmcia_init(void)
#endif
-# ifdef CONFIG_IDE_LED
-void ide_led (uchar led, uchar status)
+int board_eth_init(bd_t *bis)
{
- u_char val;
- /* We have one PCMCIA slot and use LED H4 for the IDE Interface */
- val = readb(BCSR_BASE + 0x04);
- if (status) { /* led on */
- val |= B_CTRL_LED0;
- } else {
- val &= ~B_CTRL_LED0;
- }
- writeb(val, BCSR_BASE + 0x04);
+ return pci_eth_init(bis);
}
-# endif