]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - board/earthlcd/favr-32-ezkit/favr-32-ezkit.c
avr32: Use uncached() macro to get an address for SDRAM init
[karo-tx-uboot.git] / board / earthlcd / favr-32-ezkit / favr-32-ezkit.c
index da055899f553ef34a4128fca4cf90b0e8aafcd4f..d2843c9d2b82c23cc0e157a5bcfcdbcf06d6135c 100644 (file)
@@ -23,8 +23,8 @@
 #include <asm/io.h>
 #include <asm/sdram.h>
 #include <asm/arch/clk.h>
-#include <asm/arch/gpio.h>
 #include <asm/arch/hmatrix.h>
+#include <asm/arch/portmux.h>
 
 DECLARE_GLOBAL_DATA_PTR;
 
@@ -50,13 +50,13 @@ int board_early_init_f(void)
        /* Enable SDRAM in the EBI mux */
        hmatrix_slave_write(EBI, SFR, HMATRIX_BIT(EBI_SDRAM_ENABLE));
 
-       gpio_enable_ebi();
-       gpio_enable_usart3();
+       portmux_enable_ebi(32, 23, 0, PORTMUX_DRIVE_HIGH);
+       portmux_enable_usart3(PORTMUX_DRIVE_MIN);
 #if defined(CONFIG_MACB)
-       gpio_enable_macb0();
+       portmux_enable_macb0(PORTMUX_MACB_MII, PORTMUX_DRIVE_HIGH);
 #endif
 #if defined(CONFIG_MMC)
-       gpio_enable_mmci();
+       portmux_enable_mmci(0, PORTMUX_MMCI_4BIT, PORTMUX_DRIVE_LOW);
 #endif
 
        return 0;
@@ -68,13 +68,11 @@ phys_size_t initdram(int board_type)
        unsigned long actual_size;
        void *sdram_base;
 
-       sdram_base = map_physmem(EBI_SDRAM_BASE, EBI_SDRAM_SIZE, MAP_NOCACHE);
+       sdram_base = uncached(EBI_SDRAM_BASE);
 
        expected_size = sdram_init(sdram_base, &sdram_config);
        actual_size = get_ram_size(sdram_base, expected_size);
 
-       unmap_physmem(sdram_base, EBI_SDRAM_SIZE);
-
        if (expected_size != actual_size)
                printf("Warning: Only %lu of %lu MiB SDRAM is working\n",
                                actual_size >> 20, expected_size >> 20);
@@ -82,9 +80,10 @@ phys_size_t initdram(int board_type)
        return actual_size;
 }
 
-void board_init_info(void)
+int board_early_init_r(void)
 {
        gd->bd->bi_phy_id[0] = 0x01;
+       return 0;
 }
 
 #if defined(CONFIG_MACB) && defined(CONFIG_CMD_NET)