* (C) Copyright 2001
* Matthias Fuchs, esd gmbh germany, matthias.fuchs@esd-electronics.com
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include "canbt.h"
#include <asm/processor.h>
+#include <asm/io.h>
#include <command.h>
DECLARE_GLOBAL_DATA_PTR;
-/*cmd_boot.c*/
-extern int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
-
-
/* ------------------------------------------------------------------------- */
#if 0
int board_early_init_f (void)
{
- unsigned long cntrl0Reg;
+ unsigned long CPC0_CR0Reg;
int index, len, i;
int status;
/*
* Setup GPIO pins
*/
- cntrl0Reg = mfdcr (cntrl0) & 0xf0001fff;
- cntrl0Reg |= 0x0070f000;
- mtdcr (cntrl0, cntrl0Reg);
+ CPC0_CR0Reg = mfdcr (CPC0_CR0) & 0xf0001fff;
+ CPC0_CR0Reg |= 0x0070f000;
+ mtdcr (CPC0_CR0, CPC0_CR0Reg);
#ifdef FPGA_DEBUG
/* set up serial port with default baudrate */
/*
* Setup port pins for normal operation
*/
- out32 (GPIO0_ODR, 0x00000000); /* no open drain pins */
- out32 (GPIO0_TCR, 0x07038100); /* setup for output */
- out32 (GPIO0_OR, 0x07030100); /* set output pins to high (default) */
+ out_be32 ((void *)GPIO0_ODR, 0x00000000); /* no open drain pins */
+ out_be32 ((void *)GPIO0_TCR, 0x07038100); /* setup for output */
+ out_be32 ((void *)GPIO0_OR, 0x07030100); /* set output pins to high (default) */
/*
* IRQ 0-15 405GP internally generated; active high; level sensitive
* IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
* IRQ 31 (EXT IRQ 6) COMPACT FLASH; active high; level sensitive
*/
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr (uicer, 0x00000000); /* disable all ints */
- mtdcr (uiccr, 0x00000000); /* set all to be non-critical */
- mtdcr (uicpr, 0xFFFFFF81); /* set int polarities */
- mtdcr (uictr, 0x10000000); /* set int trigger levels */
- mtdcr (uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
- mtdcr (uicsr, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr (UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr (UIC0CR, 0x00000000); /* set all to be non-critical */
+ mtdcr (UIC0PR, 0xFFFFFF81); /* set int polarities */
+ mtdcr (UIC0TR, 0x10000000); /* set int trigger levels */
+ mtdcr (UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr (UIC0SR, 0xFFFFFFFF); /* clear all ints */
return 0;
}
int index;
int len;
char str[64];
- int i = getenv_r ("serial#", str, sizeof (str));
+ int i = getenv_f("serial#", str, sizeof (str));
puts ("Board: ");