Merge branch 'master' of /home/wd/git/u-boot/master

[karo-tx-uboot.git] / board / esd / cpci2dp / cpci2dp.c

diff --git a/board/esd/cpci2dp/cpci2dp.c b/board/esd/cpci2dp/cpci2dp.c
index 517b1740a43e6650210d5b7eae591cb3075d97d9..ecfcf5923cece04d54f0f4f6a81f19de8ea67f32 100644 (file)
--- a/board/esd/cpci2dp/cpci2dp.c
+++ b/board/esd/cpci2dp/cpci2dp.c
@@ -23,6 +23,7 @@
 
 #include <common.h>
 #include <asm/processor.h>
+#include <asm/io.h>
 #include <command.h>
 #include <malloc.h>
 
@@ -30,18 +31,20 @@ DECLARE_GLOBAL_DATA_PTR;
 
 int board_early_init_f (void)
 {
-       unsigned long cntrl0Reg;
+       unsigned long CPC0_CR0Reg;
 
        /*
         * Setup GPIO pins
         */
-       cntrl0Reg = mfdcr(cntrl0);
-       mtdcr(cntrl0, cntrl0Reg | ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED | CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5));
+       CPC0_CR0Reg = mfdcr(CPC0_CR0);
+       mtdcr(CPC0_CR0, CPC0_CR0Reg |
+             ((CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED |
+               CONFIG_SYS_SELF_RST | CONFIG_SYS_INTA_FAKE) << 5));
 
        /* set output pins to high */
-       out32(GPIO0_OR,  CONFIG_SYS_EEPROM_WP);
+       out_be32((void *)GPIO0_OR,  CONFIG_SYS_EEPROM_WP);
        /* setup for output (LED=off) */
-       out32(GPIO0_TCR, CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED);
+       out_be32((void *)GPIO0_TCR, CONFIG_SYS_EEPROM_WP | CONFIG_SYS_PB_LED);
 
        /*
         * IRQ 0-15  405GP internally generated; active high; level sensitive
@@ -55,21 +58,21 @@ int board_early_init_f (void)
         * IRQ 30 (EXT IRQ 5) PCI SLOT 3; active low; level sensitive
         * IRQ 31 (EXT IRQ 6) unused
         */
-       mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
-       mtdcr(uicer, 0x00000000);       /* disable all ints */
-       mtdcr(uiccr, 0x00000000);       /* set all to be non-critical*/
-       mtdcr(uicpr, 0xFFFFFF81);       /* set int polarities */
+       mtdcr(UIC0SR, 0xFFFFFFFF);      /* clear all ints */
+       mtdcr(UIC0ER, 0x00000000);      /* disable all ints */
+       mtdcr(UIC0CR, 0x00000000);      /* set all to be non-critical*/
+       mtdcr(UIC0PR, 0xFFFFFF81);      /* set int polarities */
 
-       mtdcr(uictr, 0x10000000);       /* set int trigger levels */
-       mtdcr(uicvcr, 0x00000001);      /* set vect base=0,INT0 highest priority*/
-       mtdcr(uicsr, 0xFFFFFFFF);       /* clear all ints */
+       mtdcr(UIC0TR, 0x10000000);      /* set int trigger levels */
+       mtdcr(UIC0VCR, 0x00000001);     /* set vect base=0,INT0 highest priority*/
+       mtdcr(UIC0SR, 0xFFFFFFFF);      /* clear all ints */
 
        return 0;
 }
 
 int misc_init_r (void)
 {
-       unsigned long cntrl0Reg;
+       unsigned long CPC0_CR0Reg;
 
        /* adjust flash start and offset */
        gd->bd->bi_flashstart = 0 - gd->bd->bi_flashsize;
@@ -78,8 +81,8 @@ int misc_init_r (void)
        /*
         * Select cts (and not dsr) on uart1
         */
-       cntrl0Reg = mfdcr(cntrl0);
-       mtdcr(cntrl0, cntrl0Reg | 0x00001000);
+       CPC0_CR0Reg = mfdcr(CPC0_CR0);
+       mtdcr(CPC0_CR0, CPC0_CR0Reg | 0x00001000);
 
        return (0);
 }
@@ -91,7 +94,7 @@ int misc_init_r (void)
 int checkboard (void)
 {
        char str[64];
-       int i = getenv_r ("serial#", str, sizeof(str));
+       int i = getenv_f("serial#", str, sizeof(str));
 
        puts ("Board: ");
 
@@ -124,17 +127,20 @@ int eeprom_write_enable (unsigned dev_addr, int state) {
                switch (state) {
                case 1:
                        /* Enable write access, clear bit GPIO_SINT2. */
-                       out32(GPIO0_OR, in32(GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
+                       out_be32((void *)GPIO0_OR,
+                                in_be32((void *)GPIO0_OR) & ~CONFIG_SYS_EEPROM_WP);
                        state = 0;
                        break;
                case 0:
                        /* Disable write access, set bit GPIO_SINT2. */
-                       out32(GPIO0_OR, in32(GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
+                       out_be32((void *)GPIO0_OR,
+                                in_be32((void *)GPIO0_OR) | CONFIG_SYS_EEPROM_WP);
                        state = 0;
                        break;
                default:
                        /* Read current status back. */
-                       state = (0 == (in32(GPIO0_OR) & CONFIG_SYS_EEPROM_WP));
+                       state = (0 == (in_be32((void *)GPIO0_OR) &
+                                      CONFIG_SYS_EEPROM_WP));
                        break;
                }
        }
@@ -143,7 +149,7 @@ int eeprom_write_enable (unsigned dev_addr, int state) {
 #endif
 
 #if defined(CONFIG_SYS_EEPROM_WREN)
-int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
 {
        int query = argc == 1;
        int state = 0;
@@ -177,6 +183,6 @@ int do_eep_wren (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 U_BOOT_CMD(
        eepwren,        2,      0,      do_eep_wren,
        "Enable / disable / query EEPROM write access",
-       NULL
-       );
+       ""
+);
 #endif /* #if defined(CONFIG_SYS_EEPROM_WREN) */