/*
- * Copyright 2009-2010 Freescale Semiconductor, Inc.
+ * Copyright 2009-2011 Freescale Semiconductor, Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_law.h>
-#include <asm/fsl_ddr_sdram.h>
#include <asm/fsl_serdes.h>
#include <asm/fsl_portals.h>
#include <asm/fsl_liodn.h>
-
-extern void pci_of_setup(void *blob, bd_t *bd);
+#include <fm_eth.h>
#include "../common/ngpixis.h"
+#include "corenet_ds.h"
DECLARE_GLOBAL_DATA_PTR;
-void cpu_mp_lmb_reserve(struct lmb *lmb);
-
int checkboard (void)
{
u8 sw;
- struct cpu_type *cpu = gd->cpu;
+ struct cpu_type *cpu = gd->arch.cpu;
+ ccsr_gur_t *gur = (void *)CONFIG_SYS_MPC85xx_GUTS_ADDR;
+ unsigned int i;
+ static const char * const freq[] = {"100", "125", "156.25", "212.5" };
printf("Board: %sDS, ", cpu->name);
printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
else
printf("invalid setting of SW%u\n", PIXIS_LBMAP_SWITCH);
-#ifdef CONFIG_PHYS_64BIT
- puts("36-bit Addressing\n");
-#endif
+ /* Display the RCW, so that no one gets confused as to what RCW
+ * we're actually using for this boot.
+ */
+ puts("Reset Configuration Word (RCW):");
+ for (i = 0; i < ARRAY_SIZE(gur->rcwsr); i++) {
+ u32 rcw = in_be32(&gur->rcwsr[i]);
+
+ if ((i % 4) == 0)
+ printf("\n %08x:", i * 4);
+ printf(" %08x", rcw);
+ }
+ puts("\n");
/* Display the actual SERDES reference clocks as configured by the
* dip switches on the board. Note that the SWx registers could
* don't match.
*/
puts("SERDES Reference Clocks: ");
+#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \
+ || defined(CONFIG_P5040DS)
+ sw = in_8(&PIXIS_SW(5));
+ for (i = 0; i < 3; i++) {
+ unsigned int clock = (sw >> (6 - (2 * i))) & 3;
+
+ printf("Bank%u=%sMhz ", i+1, freq[clock]);
+ }
+#ifdef CONFIG_P5040DS
+ /* On P5040DS, SW11[7:8] determines the Bank 4 frequency */
+ sw = in_8(&PIXIS_SW(9));
+ printf("Bank4=%sMhz ", freq[sw & 3]);
+#endif
+ puts("\n");
+#else
sw = in_8(&PIXIS_SW(3));
- printf("Bank1=%uMHz ", (sw & 0x40) ? 125 : 100);
- printf("Bank2=%sMHz ", (sw & 0x20) ? "156.25" : "125");
- printf("Bank3=%sMHz\n", (sw & 0x10) ? "156.25" : "125");
+ /* SW3[2]: 0 = 100 Mhz, 1 = 125 MHz */
+ /* SW3[3]: 0 = 125 Mhz, 1 = 156.25 MHz */
+ /* SW3[4]: 0 = 125 Mhz, 1 = 156.25 MHz */
+ printf("Bank1=%sMHz ", freq[!!(sw & 0x40)]);
+ printf("Bank2=%sMHz ", freq[1 + !!(sw & 0x20)]);
+ printf("Bank3=%sMHz\n", freq[1 + !!(sw & 0x10)]);
+#endif
return 0;
}
0, flash_esel, BOOKE_PAGESZ_256M, 1); /* ts, esel, tsize, iprot */
set_liodns();
+#ifdef CONFIG_SYS_DPAA_QBMAN
setup_portals();
+#endif
return 0;
}
case SRDS_PLLCR0_RFCK_SEL_156_25:
return "156.25";
default:
- return "???";
+ return "150";
}
}
int misc_init_r(void)
{
serdes_corenet_t *srds_regs = (void *)CONFIG_SYS_FSL_CORENET_SERDES_ADDR;
- __maybe_unused ccsr_gur_t *gur;
u32 actual[NUM_SRDS_BANKS];
unsigned int i;
- u8 sw3;
-
- gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
-#ifdef CONFIG_SRIO1
- if (is_serdes_configured(SRIO1)) {
- set_next_law(CONFIG_SYS_RIO1_MEM_PHYS, LAW_SIZE_256M,
- LAW_TRGT_IF_RIO_1);
- } else {
- printf (" SRIO1: disabled\n");
- }
-#else
- setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO1); /* disable */
-#endif
+ u8 sw;
-#ifdef CONFIG_SRIO2
- if (is_serdes_configured(SRIO2)) {
- set_next_law(CONFIG_SYS_RIO2_MEM_PHYS, LAW_SIZE_256M,
- LAW_TRGT_IF_RIO_2);
- } else {
- printf (" SRIO2: disabled\n");
+#if defined(CONFIG_P3041DS) || defined(CONFIG_P5020DS) \
+ || defined(CONFIG_P5040DS)
+ sw = in_8(&PIXIS_SW(5));
+ for (i = 0; i < 3; i++) {
+ unsigned int clock = (sw >> (6 - (2 * i))) & 3;
+ switch (clock) {
+ case 0:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_100;
+ break;
+ case 1:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_125;
+ break;
+ case 2:
+ actual[i] = SRDS_PLLCR0_RFCK_SEL_156_25;
+ break;
+ default:
+ printf("Warning: SDREFCLK%u switch setting of '11' is "
+ "unsupported\n", i + 1);
+ break;
+ }
}
#else
- setbits_be32(&gur->devdisr, FSL_CORENET_DEVDISR_SRIO2); /* disable */
-#endif
-
/* Warn if the expected SERDES reference clocks don't match the
* actual reference clocks. This needs to be done after calling
* p4080_erratum_serdes8(), since that function may modify the clocks.
*/
- sw3 = in_8(&PIXIS_SW(3));
- actual[0] = (sw3 & 0x40) ?
+ sw = in_8(&PIXIS_SW(3));
+ actual[0] = (sw & 0x40) ?
SRDS_PLLCR0_RFCK_SEL_125 : SRDS_PLLCR0_RFCK_SEL_100;
- actual[1] = (sw3 & 0x20) ?
+ actual[1] = (sw & 0x20) ?
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
- actual[2] = (sw3 & 0x10) ?
+ actual[2] = (sw & 0x10) ?
SRDS_PLLCR0_RFCK_SEL_156_25 : SRDS_PLLCR0_RFCK_SEL_125;
+#endif
for (i = 0; i < NUM_SRDS_BANKS; i++) {
u32 expected = srds_regs->bank[i].pllcr0 & SRDS_PLLCR0_RFCK_SEL_MASK;
return 0;
}
-phys_size_t initdram(int board_type)
-{
- phys_size_t dram_size;
-
- puts("Initializing....\n");
-
- dram_size = fsl_ddr_sdram();
-
- setup_ddr_tlbs(dram_size / 0x100000);
-
- puts(" DDR: ");
- return dram_size;
-}
-
-#ifdef CONFIG_MP
-void board_lmb_reserve(struct lmb *lmb)
-{
- cpu_mp_lmb_reserve(lmb);
-}
-#endif
-
-void ft_srio_setup(void *blob)
-{
-#ifdef CONFIG_SRIO1
- if (!is_serdes_configured(SRIO1)) {
- fdt_del_node_and_alias(blob, "rio0");
- }
-#else
- fdt_del_node_and_alias(blob, "rio0");
-#endif
-#ifdef CONFIG_SRIO2
- if (!is_serdes_configured(SRIO2)) {
- fdt_del_node_and_alias(blob, "rio1");
- }
-#else
- fdt_del_node_and_alias(blob, "rio1");
-#endif
-}
-
void ft_board_setup(void *blob, bd_t *bd)
{
phys_addr_t base;
ft_cpu_setup(blob, bd);
- ft_srio_setup(blob);
-
base = getenv_bootm_low();
size = getenv_bootm_size();
#endif
fdt_fixup_liodn(blob);
-}
+ fdt_fixup_dr_usb(blob, bd);
-int board_eth_init(bd_t *bis)
-{
- return pci_eth_init(bis);
+#ifdef CONFIG_SYS_DPAA_FMAN
+ fdt_fixup_fman_ethernet(blob);
+ fdt_fixup_board_enet(blob);
+#endif
}
projects / karo-tx-uboot.git / blobdiff