/*
- * Copyright (C) 2006,2010 Freescale Semiconductor, Inc.
+ * Copyright (C) 2006,2010-2011 Freescale Semiconductor, Inc.
* Dave Liu <daveliu@freescale.com>
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <mpc83xx.h>
#include <i2c.h>
#include <miiphy.h>
+#include <phy.h>
+#include <fsl_mdio.h>
#if defined(CONFIG_PCI)
#include <pci.h>
#endif
#include <spd_sdram.h>
#include <asm/mmu.h>
#include <asm/io.h>
-#include <asm/fsl_enet.h>
+#include <asm/mmu.h>
#if defined(CONFIG_OF_LIBFDT)
#include <libfdt.h>
#endif
int board_early_init_r(void)
{
+ gd_t *gd;
#ifdef CONFIG_PQ_MDS_PIB
pib_init();
#endif
+ /*
+ * BAT6 is used for SDRAM when DDR size is 512MB or larger than 256MB
+ * So re-setup PCI MEM space used BAT5 after relocated to DDR
+ */
+ gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET);
+ if (gd->ram_size > CONFIG_MAX_MEM_MAPPED) {
+ write_bat(DBAT5, CONFIG_SYS_DBAT6U, CONFIG_SYS_DBAT6L);
+ write_bat(IBAT5, CONFIG_SYS_IBAT6U, CONFIG_SYS_IBAT6L);
+ }
+
return 0;
}
if (board_handle_erratum2()) {
int i;
- for (i = 0; i < ARRAY_SIZE(uec_info); i++)
- uec_info[i].enet_interface_type = RGMII_RXID;
- uec_info[i].speed = 1000;
+ for (i = 0; i < ARRAY_SIZE(uec_info); i++) {
+ uec_info[i].enet_interface_type =
+ PHY_INTERFACE_MODE_RGMII_RXID;
+ uec_info[i].speed = SPEED_1000;
+ }
}
return uec_eth_init(bd, uec_info, ARRAY_SIZE(uec_info));
}
int fixed_sdram(void)
{
volatile immap_t *im = (immap_t *) CONFIG_SYS_IMMR;
- u32 msize = 0;
- u32 ddr_size;
- u32 ddr_size_log2;
-
- msize = CONFIG_SYS_DDR_SIZE;
- for (ddr_size = msize << 20, ddr_size_log2 = 0;
- (ddr_size > 1); ddr_size = ddr_size >> 1, ddr_size_log2++) {
- if (ddr_size & 1) {
- return -1;
- }
- }
+ u32 msize = CONFIG_SYS_DDR_SIZE;
+ u32 ddr_size = msize << 20;
+ u32 ddr_size_log2 = __ilog2(ddr_size);
+ u32 half_ddr_size = ddr_size >> 1;
+
+ im->sysconf.ddrlaw[0].bar =
+ CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
im->sysconf.ddrlaw[0].ar =
- LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
+ LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
#if (CONFIG_SYS_DDR_SIZE != 256)
#warning Currenly any ddr size other than 256 is not supported
#endif
im->ddr.sdram_interval = CONFIG_SYS_DDR_INTERVAL;
im->ddr.sdram_clk_cntl = CONFIG_SYS_DDR_CLK_CNTL;
#else
- im->ddr.csbnds[0].csbnds = 0x00000007;
- im->ddr.csbnds[1].csbnds = 0x0008000f;
- im->ddr.cs_config[0] = CONFIG_SYS_DDR_CONFIG;
- im->ddr.cs_config[1] = CONFIG_SYS_DDR_CONFIG;
+#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
+#warning Chip select bounds is only configurable in 16MB increments
+#endif
+ im->ddr.csbnds[0].csbnds =
+ ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
+ (((CONFIG_SYS_DDR_SDRAM_BASE + half_ddr_size - 1) >>
+ CSBNDS_EA_SHIFT) & CSBNDS_EA);
+ im->ddr.csbnds[1].csbnds =
+ (((CONFIG_SYS_DDR_SDRAM_BASE + half_ddr_size) >>
+ CSBNDS_SA_SHIFT) & CSBNDS_SA) |
+ (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
+ CSBNDS_EA_SHIFT) & CSBNDS_EA);
+
+ im->ddr.cs_config[0] = CONFIG_SYS_DDR_CS0_CONFIG;
+ im->ddr.cs_config[1] = CONFIG_SYS_DDR_CS1_CONFIG;
+
+ im->ddr.cs_config[2] = 0;
+ im->ddr.cs_config[3] = 0;
im->ddr.timing_cfg_1 = CONFIG_SYS_DDR_TIMING_1;
im->ddr.timing_cfg_2 = CONFIG_SYS_DDR_TIMING_2;
if (rem)
base = base - rem + sdram_size;
+ /*
+ * Setup BAT6 for SDRAM when DDR size is 512MB or larger than 256MB
+ * After relocated to DDR, reuse BAT5 for PCI MEM space
+ */
+ if (base > CONFIG_MAX_MEM_MAPPED) {
+ unsigned long batl = base | BATL_PP_10 | BATL_MEMCOHERENCE;
+ unsigned long batu = base | BATU_BL_64M | BATU_VS | BATU_VP;
+
+ /* Setup the BAT6 for SDRAM */
+ write_bat(DBAT6, batu, batl);
+ write_bat(IBAT6, batu, batl);
+ }
+
sdram_addr = (uint *)base;
/*
* Setup SDRAM Base and Option Registers
"peripheral", sizeof("peripheral"), 1);
}
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
ft_cpu_setup(blob, bd);
#ifdef CONFIG_PCI
if (prop) {
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path,
- "phy-connection-type", 0);
+ "phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
- RGMII_RXID);
+ PHY_INTERFACE_MODE_RGMII_RXID);
}
#endif
#if defined(CONFIG_HAS_ETH1)
if (prop) {
path = fdt_path_offset(blob, prop);
prop = fdt_getprop(blob, path,
- "phy-connection-type", 0);
+ "phy-connection-type", 0);
if (prop && (strcmp(prop, "rgmii-id") == 0))
fdt_fixup_phy_connection(blob, path,
- RGMII_RXID);
+ PHY_INTERFACE_MODE_RGMII_RXID);
}
#endif
}
}
+
+ return 0;
}
#endif
projects / karo-tx-uboot.git / blobdiff