/*
- * Copyright 2004, 2007 Freescale Semiconductor.
+ * Copyright 2004, 2007, 200 Freescale Semiconductor, Inc.
*
* (C) Copyright 2002 Scott McNutt <smcnutt@artesyncp.com>
*
#include <common.h>
#include <pci.h>
#include <asm/processor.h>
+#include <asm/mmu.h>
#include <asm/immap_85xx.h>
-#include <asm/immap_fsl_pci.h>
-#include <spd.h>
+#include <asm/fsl_pci.h>
+#include <asm/fsl_ddr_sdram.h>
+#include <spd_sdram.h>
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
#include "../common/eeprom.h"
#include "../common/via.h"
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
-extern void ddr_enable_ecc(unsigned int dram_size);
-#endif
-
DECLARE_GLOBAL_DATA_PTR;
-extern long int spd_sdram(void);
-
void local_bus_init(void);
void sdram_init(void);
-int board_early_init_f (void)
-{
- return 0;
-}
-
int checkboard (void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
- volatile ccsr_local_ecm_t *ecm = (void *)(CFG_MPC85xx_ECM_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_local_ecm_t *ecm = (void *)(CONFIG_SYS_MPC85xx_ECM_ADDR);
/* PCI slot in USER bits CSR[6:7] by convention. */
uint pci_slot = get_pci_slot ();
*/
local_bus_init ();
- /*
- * Fix CPU2 errata: A core hang possible while executing a
- * msync instruction and a snoopable transaction from an I/O
- * master tagged to make quick forward progress is present.
- */
- ecm->eebpcr |= (1 << 16);
-
/*
* Hack TSEC 3 and 4 IO voltages.
*/
return 0;
}
-long int
+phys_size_t
initdram(int board_type)
{
long dram_size = 0;
* Override DLL = 1, Course Adj = 1, Tap Select = 0
*/
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
gur->ddrdllcr = 0x81000000;
asm("sync;isync;msync");
udelay(200);
}
#endif
- dram_size = spd_sdram();
-#if defined(CONFIG_DDR_ECC) && !defined(CONFIG_ECC_INIT_VIA_DDRCONTROLLER)
- /*
- * Initialize and enable DDR ECC.
- */
- ddr_enable_ecc(dram_size);
-#endif
+ dram_size = fsl_ddr_sdram();
+ dram_size = setup_ddr_tlbs(dram_size / 0x100000);
+ dram_size *= 0x100000;
+
/*
* SDRAM Initialization
*/
void
local_bus_init(void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
- volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
uint clkdiv;
uint lbc_hz;
sys_info_t sysinfo;
get_sys_info(&sysinfo);
- clkdiv = (lbc->lcrr & 0x0f) * 2;
+ clkdiv = (lbc->lcrr & LCRR_CLKDIV) * 2;
lbc_hz = sysinfo.freqSystemBus / 1000000 / clkdiv;
gur->lbiuiplldcr1 = 0x00078080;
void
sdram_init(void)
{
-#if defined(CFG_OR2_PRELIM) && defined(CFG_BR2_PRELIM)
+#if defined(CONFIG_SYS_OR2_PRELIM) && defined(CONFIG_SYS_BR2_PRELIM)
uint idx;
- volatile ccsr_lbc_t *lbc = (void *)(CFG_MPC85xx_LBC_ADDR);
- uint *sdram_addr = (uint *)CFG_LBC_SDRAM_BASE;
+ volatile ccsr_lbc_t *lbc = (void *)(CONFIG_SYS_MPC85xx_LBC_ADDR);
+ uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
uint cpu_board_rev;
uint lsdmr_common;
puts(" SDRAM: ");
- print_size (CFG_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
+ print_size (CONFIG_SYS_LBC_SDRAM_SIZE * 1024 * 1024, "\n");
/*
* Setup SDRAM Base and Option Registers
*/
- lbc->or2 = CFG_OR2_PRELIM;
+ lbc->or2 = CONFIG_SYS_OR2_PRELIM;
asm("msync");
- lbc->br2 = CFG_BR2_PRELIM;
+ lbc->br2 = CONFIG_SYS_BR2_PRELIM;
asm("msync");
- lbc->lbcr = CFG_LBC_LBCR;
+ lbc->lbcr = CONFIG_SYS_LBC_LBCR;
asm("msync");
- lbc->lsrt = CFG_LBC_LSRT;
- lbc->mrtpr = CFG_LBC_MRTPR;
+ lbc->lsrt = CONFIG_SYS_LBC_LSRT;
+ lbc->mrtpr = CONFIG_SYS_LBC_MRTPR;
asm("msync");
/*
* MPC8548 uses "new" 15-16 style addressing.
*/
cpu_board_rev = get_cpu_board_revision();
- lsdmr_common = CFG_LBC_LSDMR_COMMON;
- lsdmr_common |= CFG_LBC_LSDMR_BSMA1516;
+ lsdmr_common = CONFIG_SYS_LBC_LSDMR_COMMON;
+ lsdmr_common |= LSDMR_BSMA1516;
/*
* Issue PRECHARGE ALL command.
*/
- lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_PCHALL;
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_PCHALL;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
* Issue 8 AUTO REFRESH commands.
*/
for (idx = 0; idx < 8; idx++) {
- lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_ARFRSH;
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_ARFRSH;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
/*
* Issue 8 MODE-set command.
*/
- lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_MRW;
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_MRW;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
/*
* Issue NORMAL OP command.
*/
- lbc->lsdmr = lsdmr_common | CFG_LBC_LSDMR_OP_NORMAL;
+ lbc->lsdmr = lsdmr_common | LSDMR_OP_NORMAL;
asm("sync;msync");
*sdram_addr = 0xff;
ppcDcbf((unsigned long) sdram_addr);
#endif /* enable SDRAM init */
}
-#if defined(CFG_DRAM_TEST)
-int
-testdram(void)
-{
- uint *pstart = (uint *) CFG_MEMTEST_START;
- uint *pend = (uint *) CFG_MEMTEST_END;
- uint *p;
-
- printf("Testing DRAM from 0x%08x to 0x%08x\n",
- CFG_MEMTEST_START,
- CFG_MEMTEST_END);
-
- printf("DRAM test phase 1:\n");
- for (p = pstart; p < pend; p++)
- *p = 0xaaaaaaaa;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0xaaaaaaaa) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test phase 2:\n");
- for (p = pstart; p < pend; p++)
- *p = 0x55555555;
-
- for (p = pstart; p < pend; p++) {
- if (*p != 0x55555555) {
- printf ("DRAM test fails at: %08x\n", (uint) p);
- return 1;
- }
- }
-
- printf("DRAM test passed.\n");
- return 0;
-}
-#endif
-
#if defined(CONFIG_PCI) || defined(CONFIG_PCI1)
/* For some reason the Tundra PCI bridge shows up on itself as a
* different device. Work around that by refusing to configure it.
static struct pci_controller pcie1_hose;
#endif /* CONFIG_PCIE1 */
-int first_free_busno=0;
-
-void
-pci_init_board(void)
+void pci_init_board(void)
{
- volatile ccsr_gur_t *gur = (void *)(CFG_MPC85xx_GUTS_ADDR);
- uint io_sel = (gur->pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint host_agent = (gur->porbmsr & MPC85xx_PORBMSR_HA) >> 16;
+ volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
+ struct fsl_pci_info pci_info[4];
+ u32 devdisr, pordevsr, io_sel;
+ u32 porpllsr, pci_agent, pci_speed, pci_32, pci_arb, pci_clk_sel;
+ int first_free_busno = 0;
+ int num = 0;
+ int pcie_ep, pcie_configured;
-#ifdef CONFIG_PCI1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCI1_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
- struct pci_controller *hose = &pci1_hose;
- struct pci_config_table *table;
-
- uint pci_32 = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */
- uint pci_arb = gur->pordevsr & MPC85xx_PORDEVSR_PCI1_ARB; /* PORDEVSR[14] */
- uint pci_clk_sel = gur->porpllsr & MPC85xx_PORDEVSR_PCI1_SPD; /* PORPLLSR[16] */
-
- uint pci_agent = (host_agent == 3) || (host_agent == 4 ) || (host_agent == 6);
+ devdisr = in_be32(&gur->devdisr);
+ pordevsr = in_be32(&gur->pordevsr);
+ porpllsr = in_be32(&gur->porpllsr);
+ io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
- uint pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */
+ debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
- if (!(gur->devdisr & MPC85xx_DEVDISR_PCI1)) {
- printf (" PCI: %d bit, %s MHz, %s, %s, %s\n",
+#ifdef CONFIG_PCI1
+ pci_speed = get_clock_freq (); /* PCI PSPEED in [4:5] */
+ pci_32 = pordevsr & MPC85xx_PORDEVSR_PCI1_PCI32; /* PORDEVSR[15] */
+ pci_arb = pordevsr & MPC85xx_PORDEVSR_PCI1_ARB;
+ pci_clk_sel = porpllsr & MPC85xx_PORDEVSR_PCI1_SPD;
+
+ if (!(devdisr & MPC85xx_DEVDISR_PCI1)) {
+ SET_STD_PCI_INFO(pci_info[num], 1);
+ pci_agent = fsl_setup_hose(&pci1_hose, pci_info[num].regs);
+ printf ("\n PCI: %d bit, %s MHz, %s, %s, %s (base address %lx)\n",
(pci_32) ? 32 : 64,
(pci_speed == 33333000) ? "33" :
(pci_speed == 66666000) ? "66" : "unknown",
pci_clk_sel ? "sync" : "async",
pci_agent ? "agent" : "host",
- pci_arb ? "arbiter" : "external-arbiter"
- );
-
-
- /* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
-
-
- /* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCI1_MEM_BASE,
- CFG_PCI1_MEM_PHYS,
- CFG_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCI1_IO_BASE,
- CFG_PCI1_IO_PHYS,
- CFG_PCI1_IO_SIZE,
- PCI_REGION_IO);
- hose->region_count = 3;
-
- /* relocate config table pointers */
- hose->config_table = \
- (struct pci_config_table *)((uint)hose->config_table + gd->reloc_off);
- for (table = hose->config_table; table && table->vendor; table++)
- table->config_device += gd->reloc_off;
-
- hose->first_busno=first_free_busno;
- pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
-
- fsl_pci_init(hose);
- first_free_busno=hose->last_busno+1;
- printf ("PCI on bus %02x - %02x\n",hose->first_busno,hose->last_busno);
+ pci_arb ? "arbiter" : "external-arbiter",
+ pci_info[num].regs);
+
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pci1_hose, first_free_busno);
+
#ifdef CONFIG_PCIX_CHECK
- if (!(gur->pordevsr & PORDEVSR_PCI)) {
+ if (!(pordevsr & MPC85xx_PORDEVSR_PCI1)) {
/* PCI-X init */
if (CONFIG_SYS_CLK_FREQ < 66000000)
printf("PCI-X will only work at 66 MHz\n");
} else {
printf (" PCI: disabled\n");
}
-}
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCI1; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI1); /* disable */
#endif
#ifdef CONFIG_PCI2
{
- uint pci2_clk_sel = gur->porpllsr & 0x4000; /* PORPLLSR[17] */
+ uint pci2_clk_sel = porpllsr & 0x4000; /* PORPLLSR[17] */
uint pci_dual = get_pci_dual (); /* PCI DUAL in CM_PCI[3] */
if (pci_dual) {
printf (" PCI2: 32 bit, 66 MHz, %s\n",
}
}
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCI2; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCI2); /* disable */
#endif /* CONFIG_PCI2 */
#ifdef CONFIG_PCIE1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CFG_PCIE1_ADDR;
- extern void fsl_pci_init(struct pci_controller *hose);
- struct pci_controller *hose = &pcie1_hose;
- int pcie_ep = (host_agent == 0) || (host_agent == 2 ) || (host_agent == 3);
-
- int pcie_configured = io_sel >= 1;
-
- if (pcie_configured && !(gur->devdisr & MPC85xx_DEVDISR_PCIE)){
- printf ("\n PCIE connected to slot as %s (base address %x)",
- pcie_ep ? "End Point" : "Root Complex",
- (uint)pci);
-
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug (" with errors. Clearing. Now 0x%08x",pci->pme_msg_det);
- }
- printf ("\n");
+ pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
- /* inbound */
- pci_set_region(hose->regions + 0,
- CFG_PCI_MEMORY_BUS,
- CFG_PCI_MEMORY_PHYS,
- CFG_PCI_MEMORY_SIZE,
- PCI_REGION_MEM | PCI_REGION_MEMORY);
-
- /* outbound memory */
- pci_set_region(hose->regions + 1,
- CFG_PCIE1_MEM_BASE,
- CFG_PCIE1_MEM_PHYS,
- CFG_PCIE1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(hose->regions + 2,
- CFG_PCIE1_IO_BASE,
- CFG_PCIE1_IO_PHYS,
- CFG_PCIE1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = 3;
-
- hose->first_busno=first_free_busno;
- pci_setup_indirect(hose, (int) &pci->cfg_addr, (int) &pci->cfg_data);
-
- fsl_pci_init(hose);
- printf ("PCIE on bus %d - %d\n",hose->first_busno,hose->last_busno);
-
- first_free_busno=hose->last_busno+1;
+ if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)){
+ SET_STD_PCIE_INFO(pci_info[num], 1);
+ pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
+ printf (" PCIE1 connected to Slot as %s (base addr %lx)\n",
+ pcie_ep ? "End Point" : "Root Complex",
+ pci_info[num].regs);
+ first_free_busno = fsl_pci_init_port(&pci_info[num++],
+ &pcie1_hose, first_free_busno);
} else {
- printf (" PCIE: disabled\n");
+ printf (" PCIE1: disabled\n");
}
- }
+
+ puts("\n");
#else
- gur->devdisr |= MPC85xx_DEVDISR_PCIE; /* disable */
+ setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
#endif
-
}
int last_stage_init(void)
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_pci_setup(void *blob, bd_t *bd)
+void ft_pci_setup(void *blob, bd_t *bd)
{
- int node, tmp[2];
- const char *path;
-
- node = fdt_path_offset(blob, "/aliases");
- tmp[0] = 0;
- if (node >= 0) {
#ifdef CONFIG_PCI1
- path = fdt_getprop(blob, node, "pci0", NULL);
- if (path) {
- tmp[1] = pci1_hose.last_busno - pci1_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+ ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
#endif
#ifdef CONFIG_PCIE1
- path = fdt_getprop(blob, node, "pci1", NULL);
- if (path) {
- tmp[1] = pcie1_hose.last_busno - pcie1_hose.first_busno;
- do_fixup_by_path(blob, path, "bus-range", &tmp, 8, 1);
- }
+ ft_fsl_pci_setup(blob, "pci1", &pcie1_hose);
#endif
- }
}
#endif