/*
- * Copyright 2006, 2007 Freescale Semiconductor.
+ * Copyright 2006, 2007, 2010-2011 Freescale Semiconductor.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/immap_86xx.h>
#include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
+#include <asm/fsl_serdes.h>
#include <asm/io.h>
#include <libfdt.h>
#include <fdt_support.h>
#include <netdev.h>
-#include "../common/pixis.h"
-
phys_size_t fixed_sdram(void);
-int board_early_init_f(void)
-{
- return 0;
-}
-
int checkboard(void)
{
u8 vboot;
else
puts ("Promjet\n");
-#ifdef CONFIG_PHYS_64BIT
- printf (" 36-bit physical address map\n");
-#endif
return 0;
}
-
phys_size_t
initdram(int board_type)
{
setup_ddr_bat(dram_size);
- puts(" DDR: ");
+ debug(" DDR: ");
return dram_size;
}
{
#if !defined(CONFIG_SYS_RAMBOOT)
volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
- volatile ccsr_ddr_t *ddr = &immap->im_ddr1;
+ struct ccsr_ddr __iomem *ddr = &immap->im_ddr1;
ddr->cs0_bnds = CONFIG_SYS_DDR_CS0_BNDS;
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
}
#endif /* !defined(CONFIG_SPD_EEPROM) */
-
-#if defined(CONFIG_PCI)
-static struct pci_controller pci1_hose;
-#endif /* CONFIG_PCI */
-
-#ifdef CONFIG_PCI2
-static struct pci_controller pci2_hose;
-#endif /* CONFIG_PCI2 */
-
-int first_free_busno = 0;
-
void pci_init_board(void)
{
-#ifdef CONFIG_PCI1
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI1_ADDR;
- struct pci_controller *hose = &pci1_hose;
- struct pci_region *r = hose->regions;
- volatile immap_t *immap = (immap_t *) CONFIG_SYS_CCSRBAR;
- volatile ccsr_gur_t *gur = &immap->im_gur;
- uint devdisr = gur->devdisr;
- uint io_sel = (gur->pordevsr & MPC8641_PORDEVSR_IO_SEL)
- >> MPC8641_PORDEVSR_IO_SEL_SHIFT;
- int pcie_configured = is_fsl_pci_cfg(LAW_TRGT_IF_PCIE_1, io_sel);
-
-#ifdef DEBUG
- uint host1_agent = (gur->porbmsr & MPC8641_PORBMSR_HA)
- >> MPC8641_PORBMSR_HA_SHIFT;
- uint pex1_agent = (host1_agent == 0) || (host1_agent == 1);
-#endif
- if (pcie_configured && !(devdisr & MPC86xx_DEVDISR_PCIEX1)) {
- debug("PCI-EXPRESS 1: %s \n", pex1_agent ? "Agent" : "Host");
- debug("0x%08x=0x%08x ", &pci->pme_msg_det, pci->pme_msg_det);
- if (pci->pme_msg_det) {
- pci->pme_msg_det = 0xffffffff;
- debug(" with errors. Clearing. Now 0x%08x",
- pci->pme_msg_det);
- }
- debug("\n");
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_MEM_BUS,
- CONFIG_SYS_PCI1_MEM_PHYS,
- CONFIG_SYS_PCI1_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI1_IO_BUS,
- CONFIG_SYS_PCI1_IO_PHYS,
- CONFIG_SYS_PCI1_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- first_free_busno=hose->last_busno+1;
- printf (" PCI-EXPRESS 1 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
+ fsl_pcie_init_board(0);
+#ifdef CONFIG_PCIE1
/*
* Activate ULI1575 legacy chip by performing a fake
* memory access. Needed to make ULI RTC work.
*/
- in_be32((unsigned *) ((char *)(CONFIG_SYS_PCI1_MEM_VIRT
- + CONFIG_SYS_PCI1_MEM_SIZE - 0x1000000)));
-
- } else {
- puts("PCI-EXPRESS 1: Disabled\n");
- }
-}
-#else
- puts("PCI-EXPRESS1: Disabled\n");
-#endif /* CONFIG_PCI1 */
-
-#ifdef CONFIG_PCI2
-{
- volatile ccsr_fsl_pci_t *pci = (ccsr_fsl_pci_t *) CONFIG_SYS_PCI2_ADDR;
- struct pci_controller *hose = &pci2_hose;
- struct pci_region *r = hose->regions;
-
- /* outbound memory */
- pci_set_region(r++,
- CONFIG_SYS_PCI2_MEM_BUS,
- CONFIG_SYS_PCI2_MEM_PHYS,
- CONFIG_SYS_PCI2_MEM_SIZE,
- PCI_REGION_MEM);
-
- /* outbound io */
- pci_set_region(r++,
- CONFIG_SYS_PCI2_IO_BUS,
- CONFIG_SYS_PCI2_IO_PHYS,
- CONFIG_SYS_PCI2_IO_SIZE,
- PCI_REGION_IO);
-
- hose->region_count = r - hose->regions;
-
- hose->first_busno=first_free_busno;
-
- fsl_pci_init(hose, (u32)&pci->cfg_addr, (u32)&pci->cfg_data);
-
- first_free_busno=hose->last_busno+1;
- printf (" PCI-EXPRESS 2 on bus %02x - %02x\n",
- hose->first_busno,hose->last_busno);
-}
-#else
- puts("PCI-EXPRESS 2: Disabled\n");
-#endif /* CONFIG_PCI2 */
-
+ in_be32((unsigned *) ((char *)(CONFIG_SYS_PCIE1_MEM_VIRT
+ + CONFIG_SYS_PCIE1_MEM_SIZE - 0x1000000)));
+#endif /* CONFIG_PCIE1 */
}
#if defined(CONFIG_OF_BOARD_SETUP)
-void
-ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
{
int off;
u64 *tmp;
- u32 *addrcells;
+ int addrcells;
ft_cpu_setup(blob, bd);
-#ifdef CONFIG_PCI1
- ft_fsl_pci_setup(blob, "pci0", &pci1_hose);
-#endif
-#ifdef CONFIG_PCI2
- ft_fsl_pci_setup(blob, "pci1", &pci2_hose);
-#endif
+ FT_FSL_PCI_SETUP;
/*
* Warn if it looks like the device tree doesn't match u-boot.
* which is defined by the "reg" property in the soc node.
*/
off = fdt_path_offset(blob, "/soc8641");
- addrcells = (u32 *)fdt_getprop(blob, 0, "#address-cells", NULL);
+ addrcells = fdt_address_cells(blob, 0);
tmp = (u64 *)fdt_getprop(blob, off, "reg", NULL);
if (tmp) {
u64 addr;
- if (addrcells && (*addrcells == 1))
+
+ if (addrcells == 1)
addr = *(u32 *)tmp;
else
addr = *tmp;
"in u-boot. This means your .dts might "
"be old.\n");
}
+
+ return 0;
}
#endif
while (1)
;
}
-
-#ifdef CONFIG_MP
-extern void cpu_mp_lmb_reserve(struct lmb *lmb);
-
-void board_lmb_reserve(struct lmb *lmb)
-{
- cpu_mp_lmb_reserve(lmb);
-}
-#endif
projects / karo-tx-uboot.git / blobdiff