/*
- * Copyright 2007-2010 Freescale Semiconductor, Inc.
+ * Copyright 2007-2012 Freescale Semiconductor, Inc.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/cache.h>
#include <asm/immap_85xx.h>
#include <asm/fsl_pci.h>
-#include <asm/fsl_ddr_sdram.h>
+#include <fsl_ddr_sdram.h>
#include <asm/io.h>
#include <asm/fsl_serdes.h>
#include <miiphy.h>
#include <libfdt.h>
#include <fdt_support.h>
+#include <fsl_mdio.h>
#include <tsec.h>
#include <asm/fsl_law.h>
-#include <asm/mp.h>
#include <netdev.h>
#include "../common/ngpixis.h"
DECLARE_GLOBAL_DATA_PTR;
-int checkboard(void)
+int board_early_init_f(void)
{
- u8 sw;
+#ifdef CONFIG_MMC
+ ccsr_gur_t *gur = (ccsr_gur_t *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- puts("Board: P2020DS ");
-#ifdef CONFIG_PHYS_64BIT
- puts("(36-bit addrmap) ");
+ setbits_be32(&gur->pmuxcr,
+ (MPC85xx_PMUXCR_SDHC_CD |
+ MPC85xx_PMUXCR_SDHC_WP));
#endif
- printf("Sys ID: 0x%02x, Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
+ return 0;
+}
+
+int checkboard(void)
+{
+ u8 sw;
+
+ printf("Board: P2020DS Sys ID: 0x%02x, "
+ "Sys Ver: 0x%02x, FPGA Ver: 0x%02x, ",
in_8(&pixis->id), in_8(&pixis->arch), in_8(&pixis->scver));
sw = in_8(&PIXIS_SW(PIXIS_LBMAP_SWITCH));
phys_size_t fixed_sdram(void)
{
- volatile ccsr_ddr_t *ddr = (ccsr_ddr_t *)CONFIG_SYS_MPC85xx_DDR_ADDR;
+ struct ccsr_ddr __iomem *ddr =
+ (struct ccsr_ddr __iomem *)CONFIG_SYS_FSL_DDR_ADDR;
uint d_init;
ddr->cs0_config = CONFIG_SYS_DDR_CS0_CONFIG;
#endif
-#ifdef CONFIG_PCIE1
-static struct pci_controller pcie1_hose;
-#endif
-
-#ifdef CONFIG_PCIE2
-static struct pci_controller pcie2_hose;
-#endif
-
-#ifdef CONFIG_PCIE3
-static struct pci_controller pcie3_hose;
-#endif
-
#ifdef CONFIG_PCI
void pci_init_board(void)
{
- volatile ccsr_gur_t *gur = (void *)(CONFIG_SYS_MPC85xx_GUTS_ADDR);
- struct fsl_pci_info pci_info[3];
- u32 devdisr, pordevsr, io_sel;
- int first_free_busno = 0;
- int num = 0;
-
- int pcie_ep, pcie_configured;
-
- devdisr = in_be32(&gur->devdisr);
- pordevsr = in_be32(&gur->pordevsr);
- io_sel = (pordevsr & MPC85xx_PORDEVSR_IO_SEL) >> 19;
-
- debug (" pci_init_board: devdisr=%x, io_sel=%x\n", devdisr, io_sel);
-
- puts("\n");
-#ifdef CONFIG_PCIE2
- pcie_configured = is_serdes_configured(PCIE2);
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE2)) {
- SET_STD_PCIE_INFO(pci_info[num], 2);
- pcie_ep = fsl_setup_hose(&pcie2_hose, pci_info[num].regs);
- printf("PCIE2: connected to ULI as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie2_hose, first_free_busno);
-
- /*
- * The workaround doesn't work on p2020 because the location
- * we try and read isn't valid on p2020, fix this later
- */
-#if 0
- /*
- * Activate ULI1575 legacy chip by performing a fake
- * memory access. Needed to make ULI RTC work.
- * Device 1d has the first on-board memory BAR.
- */
-
- pci_hose_read_config_dword(hose, PCI_BDF(2, 0x1d, 0),
- PCI_BASE_ADDRESS_1, &temp32);
- if (temp32 >= CONFIG_SYS_PCIE3_MEM_BUS) {
- void *p = pci_mem_to_virt(PCI_BDF(2, 0x1d, 0),
- temp32, 4, 0);
- debug(" uli1575 read to %p\n", p);
- in_be32(p);
- }
-#endif
- } else {
- printf("PCIE2: disabled\n");
- }
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE2); /* disable */
-#endif
-
-#ifdef CONFIG_PCIE3
- pcie_configured = is_serdes_configured(PCIE3);
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE3)) {
- SET_STD_PCIE_INFO(pci_info[num], 3);
- pcie_ep = fsl_setup_hose(&pcie3_hose, pci_info[num].regs);
- printf("PCIE3: connected to Slot 1 as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie3_hose, first_free_busno);
- } else {
- printf("PCIE3: disabled\n");
- }
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE3); /* disable */
-#endif
-
-#ifdef CONFIG_PCIE1
- pcie_configured = is_serdes_configured(PCIE1);
-
- if (pcie_configured && !(devdisr & MPC85xx_DEVDISR_PCIE)) {
- SET_STD_PCIE_INFO(pci_info[num], 1);
- pcie_ep = fsl_setup_hose(&pcie1_hose, pci_info[num].regs);
- printf("PCIE1: connected to Slot 2 as %s (base addr %lx)\n",
- pcie_ep ? "Endpoint" : "Root Complex",
- pci_info[num].regs);
- first_free_busno = fsl_pci_init_port(&pci_info[num++],
- &pcie1_hose, first_free_busno);
- } else {
- printf("PCIE1: disabled\n");
- }
- puts("\n");
-#else
- setbits_be32(&gur->devdisr, MPC85xx_DEVDISR_PCIE); /* disable */
-#endif
+ fsl_pcie_init_board(0);
}
#endif
#ifdef CONFIG_TSEC_ENET
int board_eth_init(bd_t *bis)
{
+ struct fsl_pq_mdio_info mdio_info;
struct tsec_info_struct tsec_info[4];
int num = 0;
fsl_sgmii_riser_init(tsec_info, num);
#endif
+ mdio_info.regs = (struct tsec_mii_mng *)CONFIG_SYS_MDIO_BASE_ADDR;
+ mdio_info.name = DEFAULT_MII_NAME;
+
+ fsl_pq_mdio_init(bis, &mdio_info);
+
tsec_eth_init(bis, tsec_info, num);
return pci_eth_init(bis);
fdt_fixup_memory(blob, (u64)base, (u64)size);
+#ifdef CONFIG_HAS_FSL_DR_USB
+ fdt_fixup_dr_usb(blob, bd);
+#endif
+
FT_FSL_PCI_SETUP;
#ifdef CONFIG_FSL_SGMII_RISER
#endif
}
#endif
-
-#ifdef CONFIG_MP
-void board_lmb_reserve(struct lmb *lmb)
-{
- cpu_mp_lmb_reserve(lmb);
-}
-#endif
projects / karo-tx-uboot.git / blobdiff