Merge git://git.denx.de/u-boot-arm

[karo-tx-uboot.git] / board / keymile / km_arm / km_arm.c

diff --git a/board/keymile/km_arm/km_arm.c b/board/keymile/km_arm/km_arm.c
index eda9199bbe9f499e9c49301709007fd68708cbc1..481876b2ed8fb92d05ecd18c19c2c289a93a04f4 100644 (file)
--- a/board/keymile/km_arm/km_arm.c
+++ b/board/keymile/km_arm/km_arm.c
@@ -9,23 +9,7 @@
  * (C) Copyright 2010
  * Heiko Schocher, DENX Software Engineering, hs@denx.de.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.         See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston,
- * MA 02110-1301 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -63,7 +47,7 @@ static const u32 kwmpp_config[] = {
        MPP5_NF_IO7,
        MPP6_SYSRST_OUTn,
        MPP7_PEX_RST_OUTn,
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
        MPP8_GPIO,              /* SDA */
        MPP9_GPIO,              /* SCL */
 #endif
@@ -160,7 +144,7 @@ int ethernet_present(void)
 }
 #endif
 
-int initialize_unit_leds(void)
+static int initialize_unit_leds(void)
 {
        /*
         * Init the unit LEDs per default they all are
@@ -181,7 +165,7 @@ int initialize_unit_leds(void)
 }
 
 #if defined(CONFIG_BOOTCOUNT_LIMIT)
-void set_bootcount_addr(void)
+static void set_bootcount_addr(void)
 {
        uchar buf[32];
        unsigned int bootcountaddr;
@@ -234,7 +218,7 @@ int misc_init_r(void)
 
 int board_early_init_f(void)
 {
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
        u32 tmp;
 
        /* set the 2 bitbang i2c pins as output gpios */
@@ -260,7 +244,7 @@ int board_init(void)
        kw_gpio_set_valid(KM_FLASH_GPIO_PIN, 1);
        kw_gpio_direction_output(KM_FLASH_GPIO_PIN, 1);
 
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
        /*
         * Reinit the GPIO for I2C Bitbang driver so that the now
         * available gpio framework is consistent. The calls to
@@ -440,7 +424,7 @@ int hush_init_var(void)
 }
 #endif
 
-#if defined(CONFIG_SOFT_I2C)
+#if defined(CONFIG_SYS_I2C_SOFT)
 void set_sda(int state)
 {
        I2C_ACTIVE;