Merge remote-tracking branch 'u-boot/master' into test

[karo-tx-uboot.git] / board / nvidia / seaboard / seaboard.c

diff --git a/board/nvidia/seaboard/seaboard.c b/board/nvidia/seaboard/seaboard.c
index 3e33da0afc37976fe8c04e170a78532c4b962e5a..ce2db40f9ebf2351af0975f1036242377327a752 100644 (file)
--- a/board/nvidia/seaboard/seaboard.c
+++ b/board/nvidia/seaboard/seaboard.c
@@ -2,23 +2,7 @@
  *  (C) Copyright 2010,2011
  *  NVIDIA Corporation <www.nvidia.com>
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -28,14 +12,10 @@
 #include <asm/arch/funcmux.h>
 #include <asm/arch/gpio.h>
 #include <asm/arch/pinmux.h>
-#include <asm/arch-tegra/mmc.h>
 #include <asm/gpio.h>
-#ifdef CONFIG_TEGRA_MMC
-#include <mmc.h>
-#endif
 
 /* TODO: Remove this code when the SPI switch is working */
-#if !defined(CONFIG_SPI_UART_SWITCH) && (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
+#if (CONFIG_MACH_TYPE != MACH_TYPE_VENTANA)
 void gpio_early_init_uart(void)
 {
        /* Enable UART via GPIO_PI3 (port 8, bit 3) so serial console works */
@@ -51,39 +31,20 @@ void gpio_early_init_uart(void)
  * Routine: pin_mux_mmc
  * Description: setup the pin muxes/tristate values for the SDMMC(s)
  */
-static void pin_mux_mmc(void)
+void pin_mux_mmc(void)
 {
        funcmux_select(PERIPH_ID_SDMMC4, FUNCMUX_SDMMC4_ATB_GMA_GME_8_BIT);
        funcmux_select(PERIPH_ID_SDMMC3, FUNCMUX_SDMMC3_SDB_4BIT);
 
        /* For power GPIO PI6 */
-       pinmux_tristate_disable(PINGRP_ATA);
+       pinmux_tristate_disable(PMUX_PINGRP_ATA);
        /* For CD GPIO PI5 */
-       pinmux_tristate_disable(PINGRP_ATC);
-}
-
-/* this is a weak define that we are overriding */
-int board_mmc_init(bd_t *bd)
-{
-       debug("board_mmc_init called\n");
-
-       /* Enable muxes, etc. for SDMMC controllers */
-       pin_mux_mmc();
-
-       debug("board_mmc_init: init eMMC\n");
-       /* init dev 0, eMMC chip, with 8-bit bus */
-       tegra_mmc_init(0, 8, -1, -1);
-
-       debug("board_mmc_init: init SD slot\n");
-       /* init dev 1, SD slot, with 4-bit bus */
-       tegra_mmc_init(1, 4, GPIO_PI6, GPIO_PI5);
-
-       return 0;
+       pinmux_tristate_disable(PMUX_PINGRP_ATC);
 }
 #endif
 
 void pin_mux_usb(void)
 {
        /* For USB's GPIO PD0. For now, since we have no pinmux in fdt */
-       pinmux_tristate_disable(PINGRP_SLXK);
+       pinmux_tristate_disable(PMUX_PINGRP_SLXK);
 }