* (C) Copyright 2000
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
0x0FFFFC04, 0x0FF3FC04, 0x0FF3CC04, 0x0FF3CC04,
0x0FF3EC04, 0x0FF3CC00, 0x0FF7FC04, 0x3FFFFC04,
0xFFFFFC04, 0xFFFFFC05, /* last */
- _NOT_USED_, _NOT_USED_,
+ _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
_NOT_USED_, _NOT_USED_, _NOT_USED_, _NOT_USED_,
int checkboard (void)
{
- unsigned char *s = getenv("serial#");
+ char buf[64];
+ int i = getenv_f("serial#", buf, sizeof(buf));
- if (!s || strncmp(s, "TQM8", 4)) {
- printf ("### No HW ID - assuming RBC823\n");
- return (0);
- }
+ if (i < 0 || strncmp(buf, "TQM8", 4)) {
+ printf ("### No HW ID - assuming RBC823\n");
+ return (0);
+ }
- puts(s);
- putc ('\n');
+ puts(buf);
+ putc('\n');
- return (0);
+ return (0);
}
/* ------------------------------------------------------------------------- */
-long int initdram (int board_type)
+phys_size_t initdram (int board_type)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- long int size_b0, size8, size9;
-
- upmconfig(UPMA, (uint *)sdram_table, sizeof(sdram_table)/sizeof(uint));
-
- /*
- * 1 Bank of 64Mbit x 2 devices
- */
- memctl->memc_mptpr = CFG_MPTPR_1BK_4K;
- memctl->memc_mar = 0x00000088;
-
- /*
- * Map controller SDRAM bank 0
- */
- memctl->memc_or4 = CFG_OR4_PRELIM;
- memctl->memc_br4 = CFG_BR4_PRELIM;
- memctl->memc_mamr = CFG_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
- udelay(200);
-
- /*
- * Perform SDRAM initializsation sequence
- */
- memctl->memc_mcr = 0x80008105; /* SDRAM bank 0 */
- udelay(1);
- memctl->memc_mamr = (CFG_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_8X;
- udelay(200);
- memctl->memc_mcr = 0x80008130; /* SDRAM bank 0 - execute twice */
- udelay(1);
- memctl->memc_mamr = (CFG_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_4X;
- udelay(200);
-
- memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
- udelay (1000);
-
- /*
- * Preliminary prescaler for refresh (depends on number of
- * banks): This value is selected for four cycles every 62.4 us
- * with two SDRAM banks or four cycles every 31.2 us with one
- * bank. It will be adjusted after memory sizing.
- */
- memctl->memc_mptpr = CFG_MPTPR_2BK_4K; /* 16: but should be: CFG_MPTPR_1BK_4K */
-
- /*
- * Check Bank 0 Memory Size for re-configuration
- *
- * try 8 column mode
- */
- size8 = dram_size (CFG_MAMR_8COL, (ulong *)SDRAM_BASE4_PRELIM, SDRAM_MAX_SIZE);
- udelay (1000);
-
- /*
- * try 9 column mode
- */
- size9 = dram_size (CFG_MAMR_9COL, (ulong *)SDRAM_BASE4_PRELIM, SDRAM_MAX_SIZE);
-
- if (size8 < size9) { /* leave configuration at 9 columns */
- size_b0 = size9;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
+ long int size_b0, size8, size9;
+
+ upmconfig (UPMA, (uint *) sdram_table,
+ sizeof (sdram_table) / sizeof (uint));
+
+ /*
+ * 1 Bank of 64Mbit x 2 devices
+ */
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_1BK_4K;
+ memctl->memc_mar = 0x00000088;
+
+ /*
+ * Map controller SDRAM bank 0
+ */
+ memctl->memc_or4 = CONFIG_SYS_OR4_PRELIM;
+ memctl->memc_br4 = CONFIG_SYS_BR4_PRELIM;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL & (~(MAMR_PTAE)); /* no refresh yet */
+ udelay (200);
+
+ /*
+ * Perform SDRAM initializsation sequence
+ */
+ memctl->memc_mcr = 0x80008105; /* SDRAM bank 0 */
+ udelay (1);
+ memctl->memc_mamr = (CONFIG_SYS_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_8X;
+ udelay (200);
+ memctl->memc_mcr = 0x80008130; /* SDRAM bank 0 - execute twice */
+ udelay (1);
+ memctl->memc_mamr = (CONFIG_SYS_MAMR_8COL & ~(MAMR_TLFA_MSK)) | MAMR_TLFA_4X;
+ udelay (200);
+
+ memctl->memc_mamr |= MAMR_PTAE; /* enable refresh */
+ udelay (1000);
+
+ /*
+ * Preliminary prescaler for refresh (depends on number of
+ * banks): This value is selected for four cycles every 62.4 us
+ * with two SDRAM banks or four cycles every 31.2 us with one
+ * bank. It will be adjusted after memory sizing.
+ */
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K; /* 16: but should be: CONFIG_SYS_MPTPR_1BK_4K */
+
+ /*
+ * Check Bank 0 Memory Size for re-configuration
+ *
+ * try 8 column mode
+ */
+ size8 = dram_size (CONFIG_SYS_MAMR_8COL, (long *) SDRAM_BASE4_PRELIM,
+ SDRAM_MAX_SIZE);
+ udelay (1000);
+
+ /*
+ * try 9 column mode
+ */
+ size9 = dram_size (CONFIG_SYS_MAMR_9COL, (long *) SDRAM_BASE4_PRELIM,
+ SDRAM_MAX_SIZE);
+
+ if (size8 < size9) { /* leave configuration at 9 columns */
+ size_b0 = size9;
/* debug ("SDRAM Bank 0 in 9 column mode: %ld MB\n", size >> 20); */
- } else { /* back to 8 columns */
- size_b0 = size8;
- memctl->memc_mamr = CFG_MAMR_8COL;
- udelay(500);
+ } else { /* back to 8 columns */
+ size_b0 = size8;
+ memctl->memc_mamr = CONFIG_SYS_MAMR_8COL;
+ udelay (500);
/* debug ("SDRAM Bank 0 in 8 column mode: %ld MB\n", size >> 20); */
- }
+ }
- udelay (1000);
+ udelay (1000);
- /*
- * Adjust refresh rate depending on SDRAM type, both banks
- * For types > 128 MBit leave it at the current (fast) rate
- */
- if ((size_b0 < 0x02000000) ) {
- /* reduce to 15.6 us (62.4 us / quad) */
- memctl->memc_mptpr = CFG_MPTPR_2BK_4K;
- udelay(1000);
- }
+ /*
+ * Adjust refresh rate depending on SDRAM type, both banks
+ * For types > 128 MBit leave it at the current (fast) rate
+ */
+ if ((size_b0 < 0x02000000)) {
+ /* reduce to 15.6 us (62.4 us / quad) */
+ memctl->memc_mptpr = CONFIG_SYS_MPTPR_2BK_4K;
+ udelay (1000);
+ }
- /* SDRAM Bank 0 is bigger - map first */
+ /* SDRAM Bank 0 is bigger - map first */
- memctl->memc_or4 = ((-size_b0) & 0xFFFF0000) | CFG_OR_TIMING_SDRAM;
- memctl->memc_br4 = (CFG_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
+ memctl->memc_or4 = ((-size_b0) & 0xFFFF0000) | CONFIG_SYS_OR_TIMING_SDRAM;
+ memctl->memc_br4 = (CONFIG_SYS_SDRAM_BASE & BR_BA_MSK) | BR_MS_UPMA | BR_V;
- udelay(10000);
+ udelay (10000);
- return (size_b0);
+ return (size_b0);
}
/* ------------------------------------------------------------------------- */
* - short between data lines
*/
-static long int dram_size (long int mamr_value, long int *base, long int maxsize)
+static long int dram_size (long int mamr_value, long int *base,
+ long int maxsize)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
- volatile long int *addr;
- long int cnt, val;
-
- memctl->memc_mamr = mamr_value;
-
- for (cnt = maxsize/sizeof(long)/2; cnt > 0; cnt >>= 1) {
- addr = base + cnt; /* pointer arith! */
-
- *addr = ~cnt;
- }
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
- /* write 0 to base address */
- addr = base;
- *addr = 0;
+ memctl->memc_mamr = mamr_value;
- /* check at base address */
- if ((val = *addr) != 0) {
- return (0);
- }
-
- for (cnt = 1; cnt < maxsize/sizeof(long) ; cnt <<= 1) {
- addr = base + cnt; /* pointer arith! */
-
- val = *addr;
-
- if (val != (~cnt)) {
- return (cnt * sizeof(long));
- }
- }
- return cnt * sizeof(long);
- /* NOTREACHED */
+ return (get_ram_size (base, maxsize));
}
-void doc_init(void)
+#ifdef CONFIG_CMD_DOC
+void doc_init (void)
{
- volatile immap_t *immap = (immap_t *)CFG_IMMR;
- volatile memctl8xx_t *memctl = &immap->im_memctl;
+ volatile immap_t *immap = (immap_t *) CONFIG_SYS_IMMR;
+ volatile memctl8xx_t *memctl = &immap->im_memctl;
- upmconfig(UPMB, (uint *)static_table, sizeof(static_table)/sizeof(uint));
- memctl->memc_mbmr = MAMR_DSA_1_CYCL;
+ upmconfig (UPMB, (uint *) static_table,
+ sizeof (static_table) / sizeof (uint));
+ memctl->memc_mbmr = MAMR_DSA_1_CYCL;
- doc_probe(FLASH_BASE1_PRELIM);
+ doc_probe (FLASH_BASE1_PRELIM);
}
+#endif
projects / karo-tx-uboot.git / blobdiff