+++ /dev/null
-/*
- * Lowlevel setup for SMDKV310 board based on EXYNOS4210
- *
- * Copyright (C) 2011 Samsung Electronics
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/arch/cpu.h>
-
-/*
- * Register usages:
- *
- * r5 has zero always
- * r7 has GPIO part1 base 0x11400000
- * r6 has GPIO part2 base 0x11000000
- */
-
-#define MEM_DLLl_ON
-
-_TEXT_BASE:
- .word CONFIG_SYS_TEXT_BASE
-
- .globl lowlevel_init
-lowlevel_init:
- push {lr}
-
- /* r5 has always zero */
- mov r5, #0
- ldr r7, =EXYNOS4_GPIO_PART1_BASE
- ldr r6, =EXYNOS4_GPIO_PART2_BASE
-
- /* check reset status */
- ldr r0, =(EXYNOS4_POWER_BASE + 0x81C) @ INFORM7
- ldr r1, [r0]
-
- /* AFTR wakeup reset */
- ldr r2, =S5P_CHECK_DIDLE
- cmp r1, r2
- beq exit_wakeup
-
- /* Sleep wakeup reset */
- ldr r2, =S5P_CHECK_SLEEP
- cmp r1, r2
- beq wakeup_reset
-
- /*
- * If U-boot is already running in ram, no need to relocate U-Boot.
- * Memory controller must be configured before relocating U-Boot
- * in ram.
- */
- ldr r0, =0x00ffffff /* r0 <- Mask Bits*/
- bic r1, pc, r0 /* pc <- current addr of code */
- /* r1 <- unmasked bits of pc */
-
- ldr r2, _TEXT_BASE /* r2 <- original base addr in ram */
- bic r2, r2, r0 /* r2 <- unmasked bits of r2*/
- cmp r1, r2 /* compare r1, r2 */
- beq 1f /* r0 == r1 then skip sdram init */
-
- /* init system clock */
- bl system_clock_init
-
- /* Memory initialize */
- bl mem_ctrl_asm_init
-
-1:
- /* for UART */
- bl uart_asm_init
- bl tzpc_init
- pop {pc}
-
-wakeup_reset:
- bl system_clock_init
- bl mem_ctrl_asm_init
- bl tzpc_init
-
-exit_wakeup:
- /* Load return address and jump to kernel */
- ldr r0, =(EXYNOS4_POWER_BASE + 0x800) @ INFORM0
-
- /* r1 = physical address of exynos4210_cpu_resume function */
- ldr r1, [r0]
-
- /* Jump to kernel*/
- mov pc, r1
- nop
- nop
-
-/*
- * system_clock_init: Initialize core clock and bus clock.
- * void system_clock_init(void)
- */
-system_clock_init:
- push {lr}
- ldr r0, =EXYNOS4_CLOCK_BASE
-
- /* APLL(1), MPLL(1), CORE(0), HPM(0) */
- ldr r1, =0x0101
- ldr r2, =0x14200 @CLK_SRC_CPU
- str r1, [r0, r2]
-
- /* wait ?us */
- mov r1, #0x10000
-2: subs r1, r1, #1
- bne 2b
-
- ldr r1, =0x00
- ldr r2, =0x0C210 @CLK_SRC_TOP0
- str r1, [r0, r2]
-
- ldr r1, =0x00
- ldr r2, =0x0C214 @CLK_SRC_TOP1_OFFSET
- str r1, [r0, r2]
-
- /* DMC */
- ldr r1, =0x00
- ldr r2, =0x10200 @CLK_SRC_DMC_OFFSET
- str r1, [r0, r2]
-
- /*CLK_SRC_LEFTBUS */
- ldr r1, =0x00
- ldr r2, =0x04200 @CLK_SRC_LEFTBUS_OFFSET
- str r1, [r0, r2]
-
- /*CLK_SRC_RIGHTBUS */
- ldr r1, =0x00
- ldr r2, =0x08200 @CLK_SRC_RIGHTBUS_OFFSET
- str r1, [r0, r2]
-
- /* SATA: SCLKMPLL(0), MMC[0:4]: SCLKMPLL(6) */
- ldr r1, =0x066666
- ldr r2, =0x0C240 @ CLK_SRC_FSYS
- str r1, [r0, r2]
-
- /* UART[0:4], PWM: SCLKMPLL(6) */
- ldr r1, =0x06666666
- ldr r2, =0x0C250 @CLK_SRC_PERIL0_OFFSET
- str r1, [r0, r2]
-
- /* wait ?us */
- mov r1, #0x10000
-3: subs r1, r1, #1
- bne 3b
-
- /*
- * CLK_DIV_CPU0:
- *
- * PCLK_DBG_RATIO[20] 0x1
- * ATB_RATIO[16] 0x3
- * PERIPH_RATIO[12] 0x3
- * COREM1_RATIO[8] 0x7
- * COREM0_RATIO[4] 0x3
- */
- ldr r1, =0x0133730
- ldr r2, =0x14500 @CLK_DIV_CPU0_OFFSET
- str r1, [r0, r2]
-
- /* CLK_DIV_CPU1: COPY_RATIO [0] 0x3 */
- ldr r1, =0x03
- ldr r2, =0x14504 @CLK_DIV_CPU1_OFFSET
- str r1, [r0, r2]
-
- /*
- * CLK_DIV_DMC0:
- *
- * CORE_TIMERS_RATIO[28] 0x1
- * COPY2_RATIO[24] 0x3
- * DMCP_RATIO[20] 0x1
- * DMCD_RATIO[16] 0x1
- * DMC_RATIO[12] 0x1
- * DPHY_RATIO[8] 0x1
- * ACP_PCLK_RATIO[4] 0x1
- * ACP_RATIO[0] 0x3
- */
- ldr r1, =0x13111113
- ldr r2, =0x010500 @CLK_DIV_DMC0_OFFSET
- str r1, [r0, r2]
-
- /*
- * CLK_DIV_DMC1:
- *
- * DPM_RATIO[24] 0x1
- * DVSEM_RATIO[16] 0x1
- * PWI_RATIO[8] 0x1
- */
- ldr r1, =0x01010100
- ldr r2, =0x010504 @CLK_DIV_DMC1_OFFSET
- str r1, [r0, r2]
-
- /*
- * CLK_DIV_LEFRBUS:
- *
- * GPL_RATIO[4] 0x1
- * GDL_RATIO[0] 0x3
- */
- ldr r1, =0x013
- ldr r2, =0x04500 @CLK_DIV_LEFTBUS_OFFSET
- str r1, [r0, r2]
-
- /*
- * CLK_DIV_RIGHTBUS:
- *
- * GPR_RATIO[4] 0x1
- * GDR_RATIO[0] 0x3
- */
- ldr r1, =0x013
- ldr r2, =0x08500 @CLK_DIV_RIGHTBUS_OFFSET
- str r1, [r0, r2]
-
- /*
- * CLK_DIV_TOP:
- *
- * ONENAND_RATIO[16] 0x0
- * ACLK_133_RATIO[12] 0x5
- * ACLK_160_RATIO[8] 0x4
- * ACLK_100_RATIO[4] 0x7
- * ACLK_200_RATIO[0] 0x3
- */
- ldr r1, =0x05473
- ldr r2, =0x0C510 @CLK_DIV_TOP_OFFSET
- str r1, [r0, r2]
-
- /* MMC[0:1] */
- ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
- ldr r2, =0x0C544 @ CLK_DIV_FSYS1
- str r1, [r0, r2]
-
- /* MMC[2:3] */
- ldr r1, =0x000f000f /* 800(MPLL) / (15 + 1) */
- ldr r2, =0x0C548 @ CLK_DIV_FSYS2
- str r1, [r0, r2]
-
- /* MMC4 */
- ldr r1, =0x000f /* 800(MPLL) / (15 + 1) */
- ldr r2, =0x0C54C @ CLK_DIV_FSYS3
- str r1, [r0, r2]
-
- /* wait ?us */
- mov r1, #0x10000
-4: subs r1, r1, #1
- bne 4b
-
- /*
- * CLK_DIV_PERIL0:
- *
- * UART5_RATIO[20] 8
- * UART4_RATIO[16] 8
- * UART3_RATIO[12] 8
- * UART2_RATIO[8] 8
- * UART1_RATIO[4] 8
- * UART0_RATIO[0] 8
- */
- ldr r1, =0x774777
- ldr r2, =0x0C550 @CLK_DIV_PERIL0_OFFSET
- str r1, [r0, r2]
-
- /* SLIMBUS: ???, PWM */
- ldr r1, =0x8
- ldr r2, =0x0C55C @ CLK_DIV_PERIL3
- str r1, [r0, r2]
-
- /* Set PLL locktime */
- ldr r1, =0x01C20
- ldr r2, =0x014000 @APLL_LOCK_OFFSET
- str r1, [r0, r2]
- ldr r1, =0x01C20
- ldr r2, =0x014008 @MPLL_LOCK_OFFSET
- str r1, [r0, r2]
- ldr r1, =0x01C20
- ldr r2, =0x0C010 @EPLL_LOCK_OFFSET
- str r1, [r0, r2]
- ldr r1, =0x01C20
- ldr r2, =0x0C020 @VPLL_LOCK_OFFSET
- str r1, [r0, r2]
-
- /*
- * APLL_CON1:
- *
- * APLL_AFC_ENB[31] 0x1
- * APLL_AFC[0] 0xC
- */
- ldr r1, =0x8000000C
- ldr r2, =0x014104 @APLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /*
- * APLL_CON0:
- *
- * APLL_MDIV[16] 0xFA
- * APLL_PDIV[8] 0x6
- * APLL_SDIV[0] 0x1
- */
- ldr r1, =0x80FA0601
- ldr r2, =0x014100 @APLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /*
- * MPLL_CON1:
- *
- * MPLL_AFC_ENB[31] 0x1
- * MPLL_AFC[0] 0x1C
- */
- ldr r1, =0x0000001C
- ldr r2, =0x01410C @MPLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /*
- * MPLL_CON0:
- *
- * MPLL_MDIV[16] 0xC8
- * MPLL_PDIV[8] 0x6
- * MPLL_SDIV[0] 0x1
- */
- ldr r1, =0x80C80601
- ldr r2, =0x014108 @MPLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /* EPLL */
- ldr r1, =0x0
- ldr r2, =0x0C114 @EPLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /*
- * EPLL_CON0:
- *
- * EPLL_MDIV[16] 0x30
- * EPLL_PDIV[8] 0x3
- * EPLL_SDIV[0] 0x2
- */
- ldr r1, =0x80300302
- ldr r2, =0x0C110 @EPLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /*
- * VPLL_CON1:
- *
- * VPLL_MRR[24] 0x11
- * VPLL_MFR[16] 0x0
- * VPLL_K[0] 0x400
- */
- ldr r1, =0x11000400
- ldr r2, =0x0C124 @VPLL_CON1_OFFSET
- str r1, [r0, r2]
-
- /*
- * VPLL_CON0:
- *
- * VPLL_MDIV[16] 0x35
- * VPLL_PDIV[8] 0x3
- * VPLL_SDIV[0] 0x2
- */
- ldr r1, =0x80350302
- ldr r2, =0x0C120 @VPLL_CON0_OFFSET
- str r1, [r0, r2]
-
- /* wait ?us */
- mov r1, #0x30000
-3: subs r1, r1, #1
- bne 3b
-
- pop {pc}
-/*
- * uart_asm_init: Initialize UART in asm mode, 115200bps fixed.
- * void uart_asm_init(void)
- */
- .globl uart_asm_init
-uart_asm_init:
-
- /* setup UART0-UART3 GPIOs (part1) */
- mov r0, r7
- ldr r1, =0x22222222
- str r1, [r0, #0x00] @ EXYNOS4_GPIO_A0_OFFSET
- ldr r1, =0x00222222
- str r1, [r0, #0x20] @ EXYNOS4_GPIO_A1_OFFSET
-
- ldr r0, =EXYNOS4_UART_BASE
- add r0, r0, #EXYNOS4_DEFAULT_UART_OFFSET
-
- ldr r1, =0x3C5
- str r1, [r0, #0x4]
- ldr r1, =0x111
- str r1, [r0, #0x8]
- ldr r1, =0x3
- str r1, [r0, #0x0]
- ldr r1, =0x35
- str r1, [r0, #0x28]
- ldr r1, =0x4
- str r1, [r0, #0x2c]
-
- mov pc, lr
- nop
- nop
- nop
-
-/* Setting TZPC[TrustZone Protection Controller] */
-tzpc_init:
- ldr r0, =0x10110000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10120000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10130000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10140000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10150000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- ldr r0, =0x10160000
- mov r1, #0x0
- str r1, [r0]
- mov r1, #0xff
- str r1, [r0, #0x0804]
- str r1, [r0, #0x0810]
- str r1, [r0, #0x081C]
- str r1, [r0, #0x0828]
-
- mov pc, lr
projects / karo-tx-uboot.git / blobdiff