karo: tx6: replace open coded interpretation of cpurev by calls to is_cpu_type()

[karo-tx-uboot.git] / board / sbc8349 / sbc8349.c

diff --git a/board/sbc8349/sbc8349.c b/board/sbc8349/sbc8349.c
index 4154f29d8cd948ad38f53aa2c5f45035c51603ae..72786d2ace6516f9ebe251f3bf1371c9107ad00b 100644 (file)
--- a/board/sbc8349/sbc8349.c
+++ b/board/sbc8349/sbc8349.c
@@ -5,24 +5,7 @@
  * Paul Gortmaker <paul.gortmaker@windriver.com>
  * Based on board/mpc8349emds/mpc8349emds.c (and previous 834x releases.)
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
@@ -39,7 +22,7 @@
 int fixed_sdram(void);
 void sdram_init(void);
 
-#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83XX)
+#if defined(CONFIG_DDR_ECC) && defined(CONFIG_MPC83xx)
 void ddr_enable_ecc(unsigned int dram_size);
 #endif
 
@@ -89,26 +72,25 @@ phys_size_t initdram (int board_type)
 int fixed_sdram(void)
 {
        volatile immap_t *im = (immap_t *)CONFIG_SYS_IMMR;
-       u32 msize = 0;
-       u32 ddr_size;
-       u32 ddr_size_log2;
-
-       msize = CONFIG_SYS_DDR_SIZE;
-       for (ddr_size = msize << 20, ddr_size_log2 = 0;
-            (ddr_size > 1);
-            ddr_size = ddr_size>>1, ddr_size_log2++) {
-               if (ddr_size & 1) {
-                       return -1;
-               }
-       }
+       u32 msize = CONFIG_SYS_DDR_SIZE;
+       u32 ddr_size = msize << 20;     /* DDR size in bytes */
+       u32 ddr_size_log2 = __ilog2(msize);
+
        im->sysconf.ddrlaw[0].bar = CONFIG_SYS_DDR_SDRAM_BASE & 0xfffff000;
        im->sysconf.ddrlaw[0].ar = LAWAR_EN | ((ddr_size_log2 - 1) & LAWAR_SIZE);
 
 #if (CONFIG_SYS_DDR_SIZE != 256)
 #warning Currently any ddr size other than 256 is not supported
 #endif
-       im->ddr.csbnds[2].csbnds = 0x0000000f;
-       im->ddr.cs_config[2] = CONFIG_SYS_DDR_CONFIG;
+
+#if ((CONFIG_SYS_DDR_SDRAM_BASE & 0x00FFFFFF) != 0)
+#warning Chip select bounds is only configurable in 16MB increments
+#endif
+       im->ddr.csbnds[2].csbnds =
+               ((CONFIG_SYS_DDR_SDRAM_BASE >> CSBNDS_SA_SHIFT) & CSBNDS_SA) |
+               (((CONFIG_SYS_DDR_SDRAM_BASE + ddr_size - 1) >>
+                               CSBNDS_EA_SHIFT) & CSBNDS_EA);
+       im->ddr.cs_config[2] = CONFIG_SYS_DDR_CS2_CONFIG;
 
        /* currently we use only one CS, so disable the other banks */
        im->ddr.cs_config[0] = 0;
@@ -160,7 +142,7 @@ int checkboard (void)
 void sdram_init(void)
 {
        volatile immap_t *immap = (immap_t *)CONFIG_SYS_IMMR;
-       volatile lbus83xx_t *lbc= &immap->lbus;
+       volatile fsl_lbc_t *lbc = &immap->im_lbc;
        uint *sdram_addr = (uint *)CONFIG_SYS_LBC_SDRAM_BASE;
 
        puts("\n   SDRAM on Local Bus: ");
@@ -232,11 +214,13 @@ void sdram_init(void)
 #endif
 
 #if defined(CONFIG_OF_BOARD_SETUP)
-void ft_board_setup(void *blob, bd_t *bd)
+int ft_board_setup(void *blob, bd_t *bd)
 {
        ft_cpu_setup(blob, bd);
 #ifdef CONFIG_PCI
        ft_pci_setup(blob, bd);
 #endif
+
+       return 0;
 }
 #endif