net: cosmetic: Name ethaddr variables consistently

[karo-tx-uboot.git] / board / siemens / pxm2 / board.c

diff --git a/board/siemens/pxm2/board.c b/board/siemens/pxm2/board.c
index 0a25b4b40cc7d417c0df811c3618528ecbc733b0..4d8ba3cd800c83a24d6bc00d194fd7cb2b91fa5a 100644 (file)
--- a/board/siemens/pxm2/board.c
+++ b/board/siemens/pxm2/board.c
@@ -69,7 +69,15 @@ struct cmd_control pxm2_ddr3_cmd_ctrl_data = {
        .cmd2iclkout = 0,
 };
 
-       config_ddr(DDR_PLL_FREQ, DXR2_IOCTRL_VAL, &pxm2_ddr3_data,
+const struct ctrl_ioregs ioregs = {
+       .cm0ioctl               = DDR_IOCTRL_VAL,
+       .cm1ioctl               = DDR_IOCTRL_VAL,
+       .cm2ioctl               = DDR_IOCTRL_VAL,
+       .dt0ioctl               = DDR_IOCTRL_VAL,
+       .dt1ioctl               = DDR_IOCTRL_VAL,
+};
+
+       config_ddr(DDR_PLL_FREQ, &ioregs, &pxm2_ddr3_data,
                   &pxm2_ddr3_cmd_ctrl_data, &pxm2_ddr3_emif_reg_data, 0);
 }
 
@@ -173,13 +181,13 @@ static struct cpsw_slave_data cpsw_slaves[] = {
        {
                .slave_reg_ofs  = 0x208,
                .sliver_reg_ofs = 0xd80,
-               .phy_id         = 0,
+               .phy_addr       = 0,
                .phy_if         = PHY_INTERFACE_MODE_RMII,
        },
        {
                .slave_reg_ofs  = 0x308,
                .sliver_reg_ofs = 0xdc0,
-               .phy_id         = 1,
+               .phy_addr       = 1,
                .phy_if         = PHY_INTERFACE_MODE_RMII,
        },
 };
@@ -214,14 +222,14 @@ int board_eth_init(bd_t *bis)
        struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE;
 #ifdef CONFIG_FACTORYSET
        int rv;
-       if (!is_valid_ether_addr(factory_dat.mac))
+       if (!is_valid_ethaddr(factory_dat.mac))
                printf("Error: no valid mac address\n");
        else
                eth_setenv_enetaddr("ethaddr", factory_dat.mac);
 #endif /* #ifdef CONFIG_FACTORYSET */
 
        /* Set rgmii mode and enable rmii clock to be sourced from chip */
-       writel(RGMII_MODE_ENABLE , &cdev->miisel);
+       writel(RGMII_MODE_ENABLE  | RGMII_INT_DELAY, &cdev->miisel);
 
        rv = cpsw_register(&cpsw_data);
        if (rv < 0)
@@ -420,4 +428,38 @@ static int board_video_init(void)
        return 0;
 }
 #endif
+
+#ifdef CONFIG_BOARD_LATE_INIT
+int board_late_init(void)
+{
+       int ret;
+
+       omap_nand_switch_ecc(1, 8);
+
+#ifdef CONFIG_FACTORYSET
+       if (factory_dat.asn[0] != 0) {
+               char tmp[2 * MAX_STRING_LENGTH + 2];
+
+               if (strncmp((const char *)factory_dat.asn, "PXM50", 5) == 0)
+                       factory_dat.pxm50 = 1;
+               else
+                       factory_dat.pxm50 = 0;
+               sprintf(tmp, "%s_%s", factory_dat.asn,
+                       factory_dat.comp_version);
+               ret = setenv("boardid", tmp);
+               if (ret)
+                       printf("error setting board id\n");
+       } else {
+               factory_dat.pxm50 = 1;
+               ret = setenv("boardid", "PXM50_1.0");
+               if (ret)
+                       printf("error setting board id\n");
+       }
+       debug("PXM50: %d\n", factory_dat.pxm50);
+#endif
+
+       return 0;
+}
+#endif
+
 #include "../common/board.c"