-if TARGET_SUN4I
+if ARCH_SUNXI
-config SYS_CPU
- string
- default "armv7"
+choice
+ prompt "Sunxi SoC Variant"
-config SYS_BOARD
- string
- default "sunxi"
+config MACH_SUN4I
+ bool "sun4i (Allwinner A10)"
+ select CPU_V7
+ select SUPPORT_SPL
-config SYS_SOC
- string
- default "sunxi"
+config MACH_SUN5I
+ bool "sun5i (Allwinner A13)"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config MACH_SUN6I
+ bool "sun6i (Allwinner A31)"
+ select CPU_V7
+ select SUPPORT_SPL
+
+config MACH_SUN7I
+ bool "sun7i (Allwinner A20)"
+ select CPU_V7
+ select CPU_V7_HAS_NONSEC
+ select CPU_V7_HAS_VIRT
+ select SUPPORT_SPL
+ select ARMV7_BOOT_SEC_DEFAULT if OLD_SUNXI_KERNEL_COMPAT
+
+config MACH_SUN8I
+ bool "sun8i (Allwinner A23)"
+ select CPU_V7
+
+endchoice
config SYS_CONFIG_NAME
string
- default "sun4i"
+ default "sun4i" if MACH_SUN4I
+ default "sun5i" if MACH_SUN5I
+ default "sun6i" if MACH_SUN6I
+ default "sun7i" if MACH_SUN7I
+ default "sun8i" if MACH_SUN8I
-endif
+choice
+ prompt "Board"
-if TARGET_SUN5I
+config TARGET_A10_OLINUXINO_L
+ bool "A10_OLINUXINO_L"
+ depends on MACH_SUN4I
-config SYS_CPU
- string
- default "armv7"
+config TARGET_A10S_OLINUXINO_M
+ bool "A10S_OLINUXINO_M"
+ depends on MACH_SUN5I
-config SYS_BOARD
- string
- default "sunxi"
+config TARGET_A13_OLINUXINOM
+ bool "A13_OLINUXINOM"
+ depends on MACH_SUN5I
-config SYS_SOC
- string
- default "sunxi"
+config TARGET_A13_OLINUXINO
+ bool "A13_OLINUXINO"
+ depends on MACH_SUN5I
-config SYS_CONFIG_NAME
- string
- default "sun5i"
+config TARGET_A20_OLINUXINO_L2
+ bool "A20_OLINUXINO_L2"
+ depends on MACH_SUN7I
-endif
+config TARGET_A20_OLINUXINO_L
+ bool "A20_OLINUXINO_L"
+ depends on MACH_SUN7I
-if TARGET_SUN7I
+config TARGET_A20_OLINUXINO_M
+ bool "A20_OLINUXINO_M"
+ depends on MACH_SUN7I
-config SYS_CPU
- string
- default "armv7"
+config TARGET_AUXTEK_T004
+ bool "AUXTEK_T004"
+ depends on MACH_SUN5I
+
+config TARGET_BANANAPI
+ bool "BANANAPI"
+ depends on MACH_SUN7I
+
+config TARGET_COLOMBUS
+ bool "COLOMBUS"
+ depends on MACH_SUN6I
+
+config TARGET_CUBIEBOARD2
+ bool "CUBIEBOARD2"
+ depends on MACH_SUN7I
+
+config TARGET_CUBIEBOARD
+ bool "CUBIEBOARD"
+ depends on MACH_SUN4I
+
+config TARGET_CUBIETRUCK
+ bool "CUBIETRUCK"
+ depends on MACH_SUN7I
+
+config TARGET_IPPO_Q8H_V5
+ bool "IPPO_Q8H_V5"
+ depends on MACH_SUN8I
+
+config TARGET_PCDUINO3
+ bool "PCDUINO3"
+ depends on MACH_SUN7I
+
+config TARGET_MELE_A1000G
+ bool "MELE_A1000G"
+ depends on MACH_SUN4I
+
+config TARGET_MELE_A1000
+ bool "MELE_A1000"
+ depends on MACH_SUN4I
+
+config TARGET_MELE_M3
+ bool "MELE_M3"
+ depends on MACH_SUN7I
+
+config TARGET_MELE_M9
+ bool "MELE_M9"
+ depends on MACH_SUN6I
+
+config TARGET_MINI_X_1GB
+ bool "MINI_X_1GB"
+ depends on MACH_SUN4I
+
+config TARGET_MINI_X
+ bool "MINI_X"
+ depends on MACH_SUN4I
+
+config TARGET_BA10_TV_BOX
+ bool "BA10_TV_BOX"
+ depends on MACH_SUN4I
+
+config TARGET_I12_TVBOX
+ bool "I12_TVBOX"
+ depends on MACH_SUN7I
+
+config TARGET_QT840A
+ bool "QT840A"
+ depends on MACH_SUN7I
+
+config TARGET_R7DONGLE
+ bool "R7DONGLE"
+ depends on MACH_SUN5I
+
+endchoice
config SYS_BOARD
- string
default "sunxi"
config SYS_SOC
- string
default "sunxi"
-config SYS_CONFIG_NAME
- string
- default "sun7i"
+config SPL_FEL
+ bool "SPL/FEL mode support"
+ depends on SPL
+ default n
+
+config FDTFILE
+ string "Default fdtfile env setting for this board"
+
+config OLD_SUNXI_KERNEL_COMPAT
+ boolean "Enable workarounds for booting old kernels"
+ default n
+ ---help---
+ Set this to enable various workarounds for old kernels, this results in
+ sub-optimal settings for newer kernels, only enable if needed.
+
+config MMC0_CD_PIN
+ string "Card detect pin for mmc0"
+ default ""
+ ---help---
+ Set the card detect pin for mmc0, leave empty to not use cd. This
+ takes a string in the format understood by sunxi_name_to_gpio, e.g.
+ PH1 for pin 1 of port H.
+
+config MMC1_CD_PIN
+ string "Card detect pin for mmc1"
+ default ""
+ ---help---
+ See MMC0_CD_PIN help text.
+
+config MMC2_CD_PIN
+ string "Card detect pin for mmc2"
+ default ""
+ ---help---
+ See MMC0_CD_PIN help text.
+
+config MMC3_CD_PIN
+ string "Card detect pin for mmc3"
+ default ""
+ ---help---
+ See MMC0_CD_PIN help text.
+
+config MMC_SUNXI_SLOT_EXTRA
+ int "mmc extra slot number"
+ default -1
+ ---help---
+ sunxi builds always enable mmc0, some boards also have a second sdcard
+ slot or emmc on mmc1 - mmc3. Setting this to 1, 2 or 3 will enable
+ support for this.
+
+config USB1_VBUS_PIN
+ string "Vbus enable pin for usb1 (ehci0)"
+ default "PH6" if MACH_SUN4I || MACH_SUN7I
+ default "PH27" if MACH_SUN6I
+ ---help---
+ Set the Vbus enable pin for usb1 (ehci0, usb0 is the otg). This takes
+ a string in the format understood by sunxi_name_to_gpio, e.g.
+ PH1 for pin 1 of port H.
+
+config USB2_VBUS_PIN
+ string "Vbus enable pin for usb2 (ehci1)"
+ default "PH3" if MACH_SUN4I || MACH_SUN7I
+ default "PH24" if MACH_SUN6I
+ ---help---
+ See USB1_VBUS_PIN help text.
+
+config VIDEO
+ boolean "Enable graphical uboot console on HDMI"
+ default y
+ ---help---
+ Say Y here to add support for using a cfb console on the HDMI output
+ found on most sunxi devices.
+
+config USB_KEYBOARD
+ boolean "Enable USB keyboard support"
+ default y
+ ---help---
+ Say Y here to add support for using a USB keyboard (typically used
+ in combination with a graphical console on HDMI).
endif
projects / karo-tx-uboot.git / blobdiff