#include <power/tps65910.h>
#include <environment.h>
#include <watchdog.h>
+#include <environment.h>
#include "board.h"
DECLARE_GLOBAL_DATA_PTR;
return 0;
}
-#if defined(CONFIG_SPL_BUILD) || defined(CONFIG_NOR_BOOT)
+#ifndef CONFIG_SKIP_LOWLEVEL_INIT
static const struct ddr_data ddr2_data = {
- .datardsratio0 = ((MT47H128M16RT25E_RD_DQS<<30) |
- (MT47H128M16RT25E_RD_DQS<<20) |
- (MT47H128M16RT25E_RD_DQS<<10) |
- (MT47H128M16RT25E_RD_DQS<<0)),
- .datawdsratio0 = ((MT47H128M16RT25E_WR_DQS<<30) |
- (MT47H128M16RT25E_WR_DQS<<20) |
- (MT47H128M16RT25E_WR_DQS<<10) |
- (MT47H128M16RT25E_WR_DQS<<0)),
- .datawiratio0 = ((MT47H128M16RT25E_PHY_WRLVL<<30) |
- (MT47H128M16RT25E_PHY_WRLVL<<20) |
- (MT47H128M16RT25E_PHY_WRLVL<<10) |
- (MT47H128M16RT25E_PHY_WRLVL<<0)),
- .datagiratio0 = ((MT47H128M16RT25E_PHY_GATELVL<<30) |
- (MT47H128M16RT25E_PHY_GATELVL<<20) |
- (MT47H128M16RT25E_PHY_GATELVL<<10) |
- (MT47H128M16RT25E_PHY_GATELVL<<0)),
- .datafwsratio0 = ((MT47H128M16RT25E_PHY_FIFO_WE<<30) |
- (MT47H128M16RT25E_PHY_FIFO_WE<<20) |
- (MT47H128M16RT25E_PHY_FIFO_WE<<10) |
- (MT47H128M16RT25E_PHY_FIFO_WE<<0)),
- .datawrsratio0 = ((MT47H128M16RT25E_PHY_WR_DATA<<30) |
- (MT47H128M16RT25E_PHY_WR_DATA<<20) |
- (MT47H128M16RT25E_PHY_WR_DATA<<10) |
- (MT47H128M16RT25E_PHY_WR_DATA<<0)),
+ .datardsratio0 = MT47H128M16RT25E_RD_DQS,
+ .datafwsratio0 = MT47H128M16RT25E_PHY_FIFO_WE,
+ .datawrsratio0 = MT47H128M16RT25E_PHY_WR_DATA,
};
static const struct cmd_control ddr2_cmd_ctrl_data = {
.cmd0csratio = MT47H128M16RT25E_RATIO,
- .cmd0iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
.cmd1csratio = MT47H128M16RT25E_RATIO,
- .cmd1iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
.cmd2csratio = MT47H128M16RT25E_RATIO,
- .cmd2iclkout = MT47H128M16RT25E_INVERT_CLKOUT,
};
static const struct emif_regs ddr2_emif_reg_data = {
int spl_start_uboot(void)
{
/* break into full u-boot on 'c' */
- return (serial_tstc() && serial_getc() == 'c');
+ if (serial_tstc() && serial_getc() == 'c')
+ return 1;
+
+#ifdef CONFIG_SPL_ENV_SUPPORT
+ env_init();
+ env_relocate_spec();
+ if (getenv_yesno("boot_os") != 1)
+ return 1;
+#endif
+
+ return 0;
}
#endif
void set_uart_mux_conf(void)
{
-#ifdef CONFIG_SERIAL1
+#if CONFIG_CONS_INDEX == 1
enable_uart0_pin_mux();
-#endif /* CONFIG_SERIAL1 */
-#ifdef CONFIG_SERIAL2
+#elif CONFIG_CONS_INDEX == 2
enable_uart1_pin_mux();
-#endif /* CONFIG_SERIAL2 */
-#ifdef CONFIG_SERIAL3
+#elif CONFIG_CONS_INDEX == 3
enable_uart2_pin_mux();
-#endif /* CONFIG_SERIAL3 */
-#ifdef CONFIG_SERIAL4
+#elif CONFIG_CONS_INDEX == 4
enable_uart3_pin_mux();
-#endif /* CONFIG_SERIAL4 */
-#ifdef CONFIG_SERIAL5
+#elif CONFIG_CONS_INDEX == 5
enable_uart4_pin_mux();
-#endif /* CONFIG_SERIAL5 */
-#ifdef CONFIG_SERIAL6
+#elif CONFIG_CONS_INDEX == 6
enable_uart5_pin_mux();
-#endif /* CONFIG_SERIAL6 */
+#endif
}
void set_mux_conf_regs(void)
enable_board_pin_mux(&header);
}
+const struct ctrl_ioregs ioregs_evmsk = {
+ .cm0ioctl = MT41J128MJT125_IOCTRL_VALUE,
+ .cm1ioctl = MT41J128MJT125_IOCTRL_VALUE,
+ .cm2ioctl = MT41J128MJT125_IOCTRL_VALUE,
+ .dt0ioctl = MT41J128MJT125_IOCTRL_VALUE,
+ .dt1ioctl = MT41J128MJT125_IOCTRL_VALUE,
+};
+
+const struct ctrl_ioregs ioregs_bonelt = {
+ .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+ .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+ .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+ .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+ .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE,
+};
+
+const struct ctrl_ioregs ioregs_evm15 = {
+ .cm0ioctl = MT41J512M8RH125_IOCTRL_VALUE,
+ .cm1ioctl = MT41J512M8RH125_IOCTRL_VALUE,
+ .cm2ioctl = MT41J512M8RH125_IOCTRL_VALUE,
+ .dt0ioctl = MT41J512M8RH125_IOCTRL_VALUE,
+ .dt1ioctl = MT41J512M8RH125_IOCTRL_VALUE,
+};
+
+const struct ctrl_ioregs ioregs = {
+ .cm0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .cm1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .cm2ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .dt0ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+ .dt1ioctl = MT47H128M16RT25E_IOCTRL_VALUE,
+};
+
void sdram_init(void)
{
__maybe_unused struct am335x_baseboard_id header;
}
if (board_is_evm_sk(&header))
- config_ddr(303, MT41J128MJT125_IOCTRL_VALUE, &ddr3_data,
+ config_ddr(303, &ioregs_evmsk, &ddr3_data,
&ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0);
else if (board_is_bone_lt(&header))
- config_ddr(400, MT41K256M16HA125E_IOCTRL_VALUE,
+ config_ddr(400, &ioregs_bonelt,
&ddr3_beagleblack_data,
&ddr3_beagleblack_cmd_ctrl_data,
&ddr3_beagleblack_emif_reg_data, 0);
else if (board_is_evm_15_or_later(&header))
- config_ddr(303, MT41J512M8RH125_IOCTRL_VALUE, &ddr3_evm_data,
+ config_ddr(303, &ioregs_evm15, &ddr3_evm_data,
&ddr3_evm_cmd_ctrl_data, &ddr3_evm_emif_reg_data, 0);
else
- config_ddr(266, MT47H128M16RT25E_IOCTRL_VALUE, &ddr2_data,
+ config_ddr(266, &ioregs, &ddr2_data,
&ddr2_cmd_ctrl_data, &ddr2_emif_reg_data, 0);
}
#endif
{
.slave_reg_ofs = 0x208,
.sliver_reg_ofs = 0xd80,
- .phy_id = 0,
+ .phy_addr = 0,
},
{
.slave_reg_ofs = 0x308,
.sliver_reg_ofs = 0xdc0,
- .phy_id = 1,
+ .phy_addr = 1,
},
};
};
#endif
-#if defined(CONFIG_DRIVER_TI_CPSW) || \
- (defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET))
+/*
+ * This function will:
+ * Read the eFuse for MAC addresses, and set ethaddr/eth1addr/usbnet_devaddr
+ * in the environment
+ * Perform fixups to the PHY present on certain boards. We only need this
+ * function in:
+ * - SPL with either CPSW or USB ethernet support
+ * - Full U-Boot, with either CPSW or USB ethernet
+ * Build in only these cases to avoid warnings about unused variables
+ * when we build an SPL that has neither option but full U-Boot will.
+ */
+#if ((defined(CONFIG_SPL_ETH_SUPPORT) || defined(CONFIG_SPL_USBETH_SUPPORT)) \
+ && defined(CONFIG_SPL_BUILD)) || \
+ ((defined(CONFIG_DRIVER_TI_CPSW) || \
+ defined(CONFIG_USB_ETHER) && defined(CONFIG_MUSB_GADGET)) && \
+ !defined(CONFIG_SPL_BUILD))
int board_eth_init(bd_t *bis)
{
int rv, n = 0;
if (!getenv("ethaddr")) {
printf("<ethaddr> not set. Validating first E-fuse MAC\n");
- if (is_valid_ether_addr(mac_addr))
+ if (is_valid_ethaddr(mac_addr))
eth_setenv_enetaddr("ethaddr", mac_addr);
}
#ifdef CONFIG_DRIVER_TI_CPSW
+
+ mac_lo = readl(&cdev->macid1l);
+ mac_hi = readl(&cdev->macid1h);
+ mac_addr[0] = mac_hi & 0xFF;
+ mac_addr[1] = (mac_hi & 0xFF00) >> 8;
+ mac_addr[2] = (mac_hi & 0xFF0000) >> 16;
+ mac_addr[3] = (mac_hi & 0xFF000000) >> 24;
+ mac_addr[4] = mac_lo & 0xFF;
+ mac_addr[5] = (mac_lo & 0xFF00) >> 8;
+
+ if (!getenv("eth1addr")) {
+ if (is_valid_ethaddr(mac_addr))
+ eth_setenv_enetaddr("eth1addr", mac_addr);
+ }
+
if (read_eeprom(&header) < 0)
puts("Could not get board ID.\n");
#endif
#if defined(CONFIG_USB_ETHER) && \
(!defined(CONFIG_SPL_BUILD) || defined(CONFIG_SPL_USBETH_SUPPORT))
- if (is_valid_ether_addr(mac_addr))
+ if (is_valid_ethaddr(mac_addr))
eth_setenv_enetaddr("usbnet_devaddr", mac_addr);
rv = usb_eth_initialize(bis);
projects / karo-tx-uboot.git / blobdiff