config: rename CONFIG_MX* to CONFIG_SOC_MX*

[karo-tx-uboot.git] / board / tqc / tqma6 / tqma6_mba6.c

diff --git a/board/tqc/tqma6/tqma6_mba6.c b/board/tqc/tqma6/tqma6_mba6.c
index 6f4cffd95ecd3b3dbf1df181f9998f7936a5f570..bfbe8db11c66744039f1ca5c1bd1189f7aee8263 100644 (file)
--- a/board/tqc/tqma6/tqma6_mba6.c
+++ b/board/tqc/tqma6/tqma6_mba6.c
@@ -54,12 +54,12 @@ DECLARE_GLOBAL_DATA_PTR;
        PAD_CTL_DSE_40ohm | PAD_CTL_HYS |                       \
        PAD_CTL_ODE | PAD_CTL_SRE_FAST)
 
-#if defined(CONFIG_MX6Q)
+#if defined(CONFIG_SOC_MX6Q)
 
 #define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII   0x02e0790
 #define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM       0x02e07ac
 
-#elif defined(CONFIG_MX6S)
+#elif defined(CONFIG_SOC_MX6S)
 
 #define IOMUX_SW_PAD_CTRL_GRP_DDR_TYPE_RGMII   0x02e0768
 #define IOMUX_SW_PAD_CTRL_GRP_RGMII_TERM       0x02e0788
@@ -261,12 +261,12 @@ int board_phy_config(struct phy_device *phydev)
  * optimized pad skew values depends on CPU variant on the TQMa6x module:
  * i.MX6Q/D or i.MX6DL/S
  */
-#if defined(CONFIG_MX6Q) || defined(CONFIG_MX6Q)
+#if defined(CONFIG_SOC_MX6Q) || defined(CONFIG_SOC_MX6Q)
 #define MBA6X_KSZ9031_CTRL_SKEW        0x0032
 #define MBA6X_KSZ9031_CLK_SKEW 0x03ff
 #define MBA6X_KSZ9031_RX_SKEW  0x3333
 #define MBA6X_KSZ9031_TX_SKEW  0x2036
-#elif defined(CONFIG_MX6DL) || defined(CONFIG_MX6S)
+#elif defined(CONFIG_SOC_MX6DL) || defined(CONFIG_SOC_MX6S)
 #define MBA6X_KSZ9031_CTRL_SKEW        0x0030
 #define MBA6X_KSZ9031_CLK_SKEW 0x03ff
 #define MBA6X_KSZ9031_RX_SKEW  0x3333