tegra: Replace 'Norrin' with 'Nyan-big' and fix typo

[karo-tx-uboot.git] / board / v38b / v38b.c

diff --git a/board/v38b/v38b.c b/board/v38b/v38b.c
index ec032eef8ded81c90a539de5e3608c7c10f49232..a3377299162e44683ab241f4a4698d10fa5b97b9 100644 (file)
--- a/board/v38b/v38b.c
+++ b/board/v38b/v38b.c
@@ -5,31 +5,16 @@
  * (C) Copyright 2004
  * Mark Jonas, Freescale Semiconductor, mark.jonas@motorola.com.
  *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <common.h>
 #include <mpc5xxx.h>
+#include <net.h>
 #include <asm/processor.h>
 
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
 static void sdram_start(int hi_addr)
 {
        long hi_addr_bit = hi_addr ? 0x01000000 : 0;
@@ -68,16 +53,16 @@ static void sdram_start(int hi_addr)
        *(vu_long *) MPC5XXX_SDRAM_CTRL = SDRAM_CONTROL | hi_addr_bit;
        __asm__ volatile ("sync");
 }
-#endif /* !CFG_RAMBOOT */
+#endif /* !CONFIG_SYS_RAMBOOT */
 
 
-long int initdram(int board_type)
+phys_size_t initdram(int board_type)
 {
        ulong dramsize = 0;
        ulong dramsize2 = 0;
        uint svr, pvr;
 
-#ifndef CFG_RAMBOOT
+#ifndef CONFIG_SYS_RAMBOOT
        ulong test1, test2;
 
        /* setup SDRAM chip selects */
@@ -98,9 +83,9 @@ long int initdram(int board_type)
 
        /* find RAM size using SDRAM CS0 only */
        sdram_start(0);
-       test1 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+       test1 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
        sdram_start(1);
-       test2 = get_ram_size((long *)CFG_SDRAM_BASE, 0x80000000);
+       test2 = get_ram_size((long *)CONFIG_SYS_SDRAM_BASE, 0x80000000);
        if (test1 > test2) {
                sdram_start(0);
                dramsize = test1;
@@ -123,10 +108,10 @@ long int initdram(int board_type)
        /* find RAM size using SDRAM CS1 only */
        if (!dramsize)
                sdram_start(0);
-       test2 = test1 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+       test2 = test1 = get_ram_size((long *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
        if (!dramsize) {
                sdram_start(1);
-               test2 = get_ram_size((long *) (CFG_SDRAM_BASE + dramsize), 0x80000000);
+               test2 = get_ram_size((long *) (CONFIG_SYS_SDRAM_BASE + dramsize), 0x80000000);
        }
        if (test1 > test2) {
                sdram_start(0);
@@ -145,7 +130,7 @@ long int initdram(int board_type)
        else
                *(vu_long *) MPC5XXX_SDRAM_CS1CFG = dramsize; /* disabled */
 
-#else /* CFG_RAMBOOT */
+#else /* CONFIG_SYS_RAMBOOT */
 
        /* retrieve size of memory connected to SDRAM CS0 */
        dramsize = *(vu_long *) MPC5XXX_SDRAM_CS0CFG & 0xFF;
@@ -161,7 +146,7 @@ long int initdram(int board_type)
        else
                dramsize2 = 0;
 
-#endif /* CFG_RAMBOOT */
+#endif /* CONFIG_SYS_RAMBOOT */
 
        /*
         * On MPC5200B we need to set the special configuration delay in the
@@ -223,6 +208,18 @@ int board_early_init_r(void)
        return 0;
 }
 
+extern void board_get_enetaddr(uchar *enetaddr);
+int misc_init_r(void)
+{
+       uchar enetaddr[6];
+
+       if (!eth_getenv_enetaddr("ethaddr", enetaddr)) {
+               board_get_enetaddr(enetaddr);
+               eth_setenv_enetaddr("ethaddr", enetaddr);
+       }
+
+       return 0;
+}
 
 #if defined(CONFIG_CMD_IDE) && defined(CONFIG_IDE_RESET)
 void init_ide_reset(void)