]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - board/xaeniax/flash.c
Merge branch 'master' of git://git.denx.de/u-boot-mpc83xx
[karo-tx-uboot.git] / board / xaeniax / flash.c
index cd257df5ba568b318697543a8c0a7c521d1918a9..836c87e1a9d3a2474b891d76ca8178f10bcc2f3b 100644 (file)
@@ -28,7 +28,7 @@
 #include <linux/byteorder/swab.h>
 
 
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS];  /* info for FLASH chips    */
+flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS];   /* info for FLASH chips    */
 
 /* Board support for 1 or 2 flash devices */
 #define FLASH_PORT_WIDTH32
@@ -65,7 +65,7 @@ unsigned long flash_init (void)
        int i;
        ulong size = 0;
 
-       for (i = 0; i < CFG_MAX_FLASH_BANKS; i++) {
+       for (i = 0; i < CONFIG_SYS_MAX_FLASH_BANKS; i++) {
                switch (i) {
                case 0:
                        flash_get_size ((FPW *) PHYS_FLASH_1, &flash_info[i]);
@@ -85,8 +85,8 @@ unsigned long flash_init (void)
        /* Protect monitor and environment sectors
         */
        flash_protect ( FLAG_PROTECT_SET,
-                       CFG_FLASH_BASE,
-                       CFG_FLASH_BASE + monitor_flash_len - 1,
+                       CONFIG_SYS_FLASH_BASE,
+                       CONFIG_SYS_FLASH_BASE + monitor_flash_len - 1,
                        &flash_info[0] );
 
        flash_protect ( FLAG_PROTECT_SET,
@@ -203,10 +203,10 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
                break;
        }
 
-       if (info->sector_count > CFG_MAX_FLASH_SECT) {
+       if (info->sector_count > CONFIG_SYS_MAX_FLASH_SECT) {
                printf ("** ERROR: sector count %d > max (%d) **\n",
-                       info->sector_count, CFG_MAX_FLASH_SECT);
-               info->sector_count = CFG_MAX_FLASH_SECT;
+                       info->sector_count, CONFIG_SYS_MAX_FLASH_SECT);
+               info->sector_count = CONFIG_SYS_MAX_FLASH_SECT;
        }
 
        addr[0] = (FPW) 0x00FF00FF;             /* restore read mode */
@@ -220,8 +220,8 @@ static ulong flash_get_size (FPW *addr, flash_info_t *info)
 
 int flash_erase (flash_info_t *info, int s_first, int s_last)
 {
-       int flag, prot, sect;
-       ulong type, start, last;
+       int prot, sect;
+       ulong type, start;
        int rcode = 0;
 
        if ((s_first < 0) || (s_first > s_last)) {
@@ -254,11 +254,8 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
                printf ("\n");
        }
 
-       start = get_timer (0);
-       last = start;
-
        /* Disable interrupts which might cause a timeout here */
-       flag = disable_interrupts ();
+       disable_interrupts();
 
        /* Start erase on unprotected sectors */
        for (sect = s_first; sect <= s_last; sect++) {
@@ -269,14 +266,14 @@ int flash_erase (flash_info_t *info, int s_first, int s_last)
                        printf ("Erasing sector %2d ... ", sect);
 
                        /* arm simple, non interrupt dependent timer */
-                       reset_timer_masked ();
+                       start = get_timer(0);
 
                        *addr = (FPW) 0x00500050;       /* clear status register */
                        *addr = (FPW) 0x00200020;       /* erase setup */
                        *addr = (FPW) 0x00D000D0;       /* erase confirm */
 
                        while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-                               if (get_timer_masked () > CFG_FLASH_ERASE_TOUT) {
+                               if (get_timer(start) > CONFIG_SYS_FLASH_ERASE_TOUT) {
                                        printf ("Timeout\n");
                                        *addr = (FPW) 0x00B000B0;       /* suspend erase     */
                                        *addr = (FPW) 0x00FF00FF;       /* reset to read mode */
@@ -392,7 +389,7 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
 {
        FPWV *addr = (FPWV *) dest;
        ulong status;
-       int flag;
+       ulong start;
 
        /* Check if Flash is (sufficiently) erased */
        if ((*addr & data) != data) {
@@ -400,17 +397,17 @@ static int write_data (flash_info_t *info, ulong dest, FPW data)
                return (2);
        }
        /* Disable interrupts which might cause a timeout here */
-       flag = disable_interrupts ();
+       disable_interrupts();
 
        *addr = (FPW) 0x00400040;       /* write setup */
        *addr = data;
 
        /* arm simple, non interrupt dependent timer */
-       reset_timer_masked ();
+       start = get_timer(0);
 
        /* wait while polling the status register */
        while (((status = *addr) & (FPW) 0x00800080) != (FPW) 0x00800080) {
-               if (get_timer_masked () > CFG_FLASH_WRITE_TOUT) {
+               if (get_timer(start) > CONFIG_SYS_FLASH_WRITE_TOUT) {
                        *addr = (FPW) 0x00FF00FF;       /* restore read mode */
                        return (1);
                }