* (C) Copyright 2007
* Stefan Roese, DENX Software Engineering, sr@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
#include <common.h>
#include <asm/processor.h>
#include <asm/io.h>
-#include <asm/gpio.h>
+#include <asm/ppc4xx-gpio.h>
DECLARE_GLOBAL_DATA_PTR;
#define REBOOT_DO_POST 0x00000001
extern flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */
-extern env_t *env_ptr;
-extern uchar default_environment[];
ulong flash_get_size(ulong base, int banknum);
void env_crc_update(void);
-int do_reset (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[]);
static u32 start_time;
int board_early_init_f(void)
{
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicer, 0x00000000); /* disable all ints */
- mtdcr(uiccr, 0x00000000);
- mtdcr(uicpr, 0xFFFF7F00); /* set int polarities */
- mtdcr(uictr, 0x00000000); /* set int trigger levels */
- mtdcr(uicsr, 0xFFFFFFFF); /* clear all ints */
- mtdcr(uicvcr, 0x00000001); /* set vect base=0,INT0 highest priority */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0ER, 0x00000000); /* disable all ints */
+ mtdcr(UIC0CR, 0x00000000);
+ mtdcr(UIC0PR, 0xFFFF7F00); /* set int polarities */
+ mtdcr(UIC0TR, 0x00000000); /* set int trigger levels */
+ mtdcr(UIC0SR, 0xFFFFFFFF); /* clear all ints */
+ mtdcr(UIC0VCR, 0x00000001); /* set vect base=0,INT0 highest priority */
/*
* Configure CPC0_PCI to enable PerWE as output
*/
- mtdcr(cpc0_pci, CPC0_PCI_SPE);
+ mtdcr(CPC0_PCI, CPC0_PCI_SPE);
return 0;
}
/* Re-do sizing to get full correct info */
/* adjust flash start and offset */
- mfebc(pb0cr, pbcr);
+ mfebc(PB0CR, pbcr);
switch (gd->bd->bi_flashsize) {
case 1 << 20:
size_val = 0;
break;
}
pbcr = (pbcr & 0x0001ffff) | gd->bd->bi_flashstart | (size_val << 17);
- mtebc(pb0cr, pbcr);
+ mtebc(PB0CR, pbcr);
/*
* Re-check to get correct base address
*/
int checkboard(void)
{
- char *s = getenv("serial#");
+ char buf[64];
+ int i = getenv_f("serial#", buf, sizeof(buf));
puts("Board: Zeus-");
puts(" of BulletEndPoint");
- if (s != NULL) {
+ if (i > 0) {
puts(", serial# ");
- puts(s);
+ puts(buf);
}
putc('\n');
char *buf_save;
u32 crc;
- /*
- * Unprotect and erase environment area
- */
- flash_protect(FLAG_PROTECT_CLEAR,
- CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1,
- &flash_info[0]);
-
- flash_sect_erase(CONFIG_ENV_ADDR_REDUND,
- CONFIG_ENV_ADDR_REDUND + 2*CONFIG_ENV_SECT_SIZE - 1);
+ set_default_env("");
- /*
- * Now restore default environment from U-Boot image
- * -> ipaddr, serverip...
- */
- memset(env_ptr, 0, sizeof(env_t));
- memcpy(env_ptr->data, default_environment, ENV_SIZE);
-#ifdef CONFIG_SYS_REDUNDAND_ENVIRONMENT
- env_ptr->flags = 0xFF;
-#endif
- env_crc_update();
gd->env_valid = 1;
/*
* -> ethaddr, eth1addr, serial#
*/
buf = buf_save = malloc(FACTORY_RESET_ENV_SIZE);
+ if (buf == NULL) {
+ printf("ERROR: malloc() failed\n");
+ return -1;
+ }
if (eeprom_read(FACTORY_RESET_I2C_EEPROM, FACTORY_RESET_ENV_OFFS,
(u8 *)buf, FACTORY_RESET_ENV_SIZE)) {
puts("\nError reading EEPROM!\n");
return 0;
}
-int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_set_default(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
char *buf;
char *buf_save;
U_BOOT_CMD(
setdef, 4, 1, do_set_default,
- "setdef - write board-specific values to EEPROM (ethaddr...)\n",
- "ethaddr eth1addr serial#\n - write board-specific values to EEPROM\n"
+ "write board-specific values to EEPROM (ethaddr...)",
+ "ethaddr eth1addr serial#\n - write board-specific values to EEPROM"
);
static inline int sw_reset_pressed(void)
return !(in_be32((void *)GPIO0_IR) & GPIO_VAL(CONFIG_SYS_GPIO_SW_RESET));
}
-int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char* argv[])
+int do_chkreset(cmd_tbl_t* cmdtp, int flag, int argc, char * const argv[])
{
int delta;
int count = 0;
U_BOOT_CMD (
chkreset, 1, 1, do_chkreset,
- "chkreset- Check for status of SW-reset button and act accordingly\n",
- NULL
+ "Check for status of SW-reset button and act accordingly",
+ ""
);
#if defined(CONFIG_POST)
projects / karo-tx-uboot.git / blobdiff