Merge branch 'master' of git://git.denx.de/u-boot-imx

[karo-tx-uboot.git] / common / board_f.c

diff --git a/common/board_f.c b/common/board_f.c
index 4ece2b6c9fe34385b5d3dd9b4452f610cf16e708..b5bebc9dc862727b7aa2386f64691ace23475cc0 100644 (file)
--- a/common/board_f.c
+++ b/common/board_f.c
@@ -34,7 +34,7 @@
 #ifdef CONFIG_MPC5xxx
 #include <mpc5xxx.h>
 #endif
-#if (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
 #include <asm/mp.h>
 #endif
 
@@ -128,14 +128,11 @@ int init_func_watchdog_reset(void)
 }
 #endif /* CONFIG_WATCHDOG */
 
-void __board_add_ram_info(int use_default)
+__weak void board_add_ram_info(int use_default)
 {
        /* please define platform specific board_add_ram_info() */
 }
 
-void board_add_ram_info(int)
-       __attribute__ ((weak, alias("__board_add_ram_info")));
-
 static int init_baud_rate(void)
 {
        gd->baudrate = getenv_ulong("baudrate", 10, CONFIG_BAUDRATE);
@@ -221,7 +218,7 @@ static int show_dram_config(void)
        return 0;
 }
 
-void __dram_init_banksize(void)
+__weak void dram_init_banksize(void)
 {
 #if defined(CONFIG_NR_DRAM_BANKS) && defined(CONFIG_SYS_SDRAM_BASE)
        gd->bd->bi_dram[0].start = CONFIG_SYS_SDRAM_BASE;
@@ -229,9 +226,6 @@ void __dram_init_banksize(void)
 #endif
 }
 
-void dram_init_banksize(void)
-       __attribute__((weak, alias("__dram_init_banksize")));
-
 #if defined(CONFIG_HARD_I2C) || defined(CONFIG_SYS_I2C)
 static int init_func_i2c(void)
 {
@@ -341,21 +335,23 @@ static int setup_ram_buf(void)
 
 static int setup_fdt(void)
 {
-#ifdef CONFIG_OF_EMBED
+#ifdef CONFIG_OF_CONTROL
+# ifdef CONFIG_OF_EMBED
        /* Get a pointer to the FDT */
        gd->fdt_blob = __dtb_dt_begin;
-#elif defined CONFIG_OF_SEPARATE
+# elif defined CONFIG_OF_SEPARATE
        /* FDT is at end of image */
        gd->fdt_blob = (ulong *)&_end;
-#elif defined(CONFIG_OF_HOSTFILE)
+# elif defined(CONFIG_OF_HOSTFILE)
        if (read_fdt_from_file()) {
                puts("Failed to read control FDT\n");
                return -1;
        }
-#endif
+# endif
        /* Allow the early environment to override the fdt address */
        gd->fdt_blob = (void *)getenv_ulong("fdtcontroladdr", 16,
                                                (uintptr_t)gd->fdt_blob);
+#endif
        return 0;
 }
 
@@ -392,7 +388,7 @@ static int setup_dest_addr(void)
        gd->ram_top = board_get_usable_ram_top(gd->mon_len);
        gd->relocaddr = gd->ram_top;
        debug("Ram top: %08lX\n", (ulong)gd->ram_top);
-#if (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
+#if defined(CONFIG_MP) && (defined(CONFIG_MPC86xx) || defined(CONFIG_E500))
        /*
         * We need to make sure the location we intend to put secondary core
         * boot code is reserved and not used by any part of u-boot
@@ -831,6 +827,8 @@ static init_fnc_t init_sequence_f[] = {
 #ifdef CONFIG_OF_CONTROL
        fdtdec_check_fdt,
 #endif
+       initf_malloc,
+       initf_dm,
 #if defined(CONFIG_BOARD_EARLY_INIT_F)
        board_early_init_f,
 #endif
@@ -866,8 +864,6 @@ static init_fnc_t init_sequence_f[] = {
        sdram_adjust_866,
        init_timebase,
 #endif
-       initf_malloc,
-       initf_dm,
        init_baud_rate,         /* initialze baudrate settings */
        serial_init,            /* serial communications setup */
        console_init_f,         /* stage 1 init of console */