/*#include <rtc.h> */
/*#endif */
-#if defined(CONFIG_CMD_FDC) || defined(CONFIG_CMD_FDOS)
-
typedef struct {
int flags; /* connected drives ect */
unsigned long blnr; /* Logical block nr */
static FDC_COMMAND_STRUCT cmd; /* global command struct */
/* If the boot drive number is undefined, we assume it's drive 0 */
-#ifndef CFG_FDC_DRIVE_NUMBER
-#define CFG_FDC_DRIVE_NUMBER 0
+#ifndef CONFIG_SYS_FDC_DRIVE_NUMBER
+#define CONFIG_SYS_FDC_DRIVE_NUMBER 0
#endif
/* Hardware access */
-#ifndef CFG_ISA_IO_STRIDE
-#define CFG_ISA_IO_STRIDE 1
+#ifndef CONFIG_SYS_ISA_IO_STRIDE
+#define CONFIG_SYS_ISA_IO_STRIDE 1
#endif
-#ifndef CFG_ISA_IO_OFFSET
-#define CFG_ISA_IO_OFFSET 0
-#endif
-
-
-#ifdef CONFIG_AMIGAONEG3SE
-unsigned char INT6_Status;
-
-void fdc_interrupt(void)
-{
- INT6_Status = 0x80;
-}
-
-/* waits for an interrupt (polling) */
-int wait_for_fdc_int(void)
-{
- unsigned long timeout;
- timeout = FDC_TIME_OUT;
- while(((volatile)INT6_Status & 0x80) == 0) {
- timeout--;
- udelay(10);
- if(timeout == 0) /* timeout occured */
- return FALSE;
- }
- INT6_Status = 0;
- return TRUE;
-}
+#ifndef CONFIG_SYS_ISA_IO_OFFSET
+#define CONFIG_SYS_ISA_IO_OFFSET 0
#endif
/* Supporting Functions */
unsigned char read_fdc_reg(unsigned int addr)
{
volatile unsigned char *val =
- (volatile unsigned char *)(CFG_ISA_IO_BASE_ADDRESS +
- (addr * CFG_ISA_IO_STRIDE) +
- CFG_ISA_IO_OFFSET);
+ (volatile unsigned char *)(CONFIG_SYS_ISA_IO_BASE_ADDRESS +
+ (addr * CONFIG_SYS_ISA_IO_STRIDE) +
+ CONFIG_SYS_ISA_IO_OFFSET);
return val [0];
}
void write_fdc_reg(unsigned int addr, unsigned char val)
{
volatile unsigned char *tmp =
- (volatile unsigned char *)(CFG_ISA_IO_BASE_ADDRESS +
- (addr * CFG_ISA_IO_STRIDE) +
- CFG_ISA_IO_OFFSET);
+ (volatile unsigned char *)(CONFIG_SYS_ISA_IO_BASE_ADDRESS +
+ (addr * CONFIG_SYS_ISA_IO_STRIDE) +
+ CONFIG_SYS_ISA_IO_OFFSET);
tmp[0]=val;
}
-#ifndef CONFIG_AMIGAONEG3SE
/* waits for an interrupt (polling) */
int wait_for_fdc_int(void)
{
return TRUE;
}
-#endif
-
/* reads a byte from the FIFO of the FDC and checks direction and RQM bit
of the MSR. returns -1 if timeout, or byte if ok */
int read_fdc_byte(void)
return(fdc_issue_cmd(pCMD,pFG));
}
-#ifndef CONFIG_AMIGAONEG3SE
/* terminates current command, by not servicing the FIFO
* waits for interrupt and fills in the result bytes */
int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
}
return TRUE;
}
-#endif
-#ifdef CONFIG_AMIGAONEG3SE
-int fdc_terminate(FDC_COMMAND_STRUCT *pCMD)
-{
- int i;
- for(i=0;i<100;i++)
- udelay(500); /* wait 500usec for fifo overrun */
- while((INT6_Status&0x80)==0x00); /* wait as long as no int has occured */
- for(i=0;i<7;i++) {
- pCMD->result[i]=(unsigned char)read_fdc_byte();
- }
- INT6_Status = 0;
- return TRUE;
-}
-
-#endif
-
-#ifdef CONFIG_AMIGAONEG3SE
-#define disable_interrupts() 0
-#define enable_interrupts() (void)0
-#endif
/* reads data from FDC, seek commands are issued automatic */
int fdc_read_data(unsigned char *buffer, unsigned long blocks,FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
if(readblk>blocks) /* is end within 1st track */
readblk=blocks; /* yes, correct it */
PRINTF("we read %ld blocks start %ld\n",readblk,pCMD->blnr);
- bufferw=&buffer[0]; /* setup working buffer */
+ bufferw = &buffer[0]; /* setup working buffer */
do {
retryrw:
len=sect_size * readblk;
* we need to get the results */
fdc_terminate(pCMD);
offset+=(sect_size*readblk); /* set up buffer pointer */
- bufferw=&buffer[offset];
+ bufferw = &buffer[offset];
pCMD->blnr+=readblk; /* update current block nr */
blocks-=readblk; /* update blocks */
if(blocks==0)
return TRUE;
}
-#ifdef CONFIG_AMIGAONEG3SE
-#undef disable_interrupts()
-#undef enable_interrupts()
-#endif
-
/* Scan all drives and check if drive is present and disk is inserted */
int fdc_check_drive(FDC_COMMAND_STRUCT *pCMD, FD_GEO_STRUCT *pFG)
{
{
int i;
-#ifdef CONFIG_AMIGAONEG3SE
- irq_install_handler(6, (interrupt_handler_t *)fdc_interrupt, NULL);
- i8259_unmask_irq(6);
-#endif
-
-#ifdef CFG_FDC_HW_INIT
+#ifdef CONFIG_SYS_FDC_HW_INIT
fdc_hw_init ();
#endif
/* first, we reset the FDC via the DOR */
return TRUE;
}
-#endif
#if defined(CONFIG_CMD_FDOS)
/****************************************************************************
* main routine do_fdcboot
*/
-int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
+int do_fdcboot (cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
{
FD_GEO_STRUCT *pFG = (FD_GEO_STRUCT *)floppy_type;
FDC_COMMAND_STRUCT *pCMD = &cmd;
image_header_t *hdr; /* used for fdc boot */
unsigned char boot_drive;
int i,nrofblk;
- char *ep;
- int rcode = 0;
#if defined(CONFIG_FIT)
const void *fit_hdr = NULL;
#endif
switch (argc) {
case 1:
- addr = CFG_LOAD_ADDR;
- boot_drive=CFG_FDC_DRIVE_NUMBER;
+ addr = CONFIG_SYS_LOAD_ADDR;
+ boot_drive=CONFIG_SYS_FDC_DRIVE_NUMBER;
break;
case 2:
addr = simple_strtoul(argv[1], NULL, 16);
- boot_drive=CFG_FDC_DRIVE_NUMBER;
+ boot_drive=CONFIG_SYS_FDC_DRIVE_NUMBER;
break;
case 3:
addr = simple_strtoul(argv[1], NULL, 16);
boot_drive=simple_strtoul(argv[2], NULL, 10);
break;
default:
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
+ return cmd_usage(cmdtp);
}
/* setup FDC and scan for drives */
if(fdc_setup(boot_drive,pCMD,pFG)==FALSE) {
/* Loading ok, update default load address */
load_addr = addr;
- /* Check if we should attempt an auto-start */
- if (((ep = getenv("autostart")) != NULL) && (strcmp(ep,"yes") == 0)) {
- char *local_args[2];
- extern int do_bootm (cmd_tbl_t *, int, int, char *[]);
-
- local_args[0] = argv[0];
- local_args[1] = NULL;
-
- printf ("Automatic boot of image at addr 0x%08lX ...\n", addr);
-
- do_bootm (cmdtp, 0, 1, local_args);
- rcode ++;
- }
- return rcode;
+ return bootm_maybe_autostart(cmdtp, argv[0]);
}
-
-#endif
-
-
-/***************************************************/
-
-
-#if defined(CONFIG_CMD_FDC)
-
U_BOOT_CMD(
fdcboot, 3, 1, do_fdcboot,
- "fdcboot - boot from floppy device\n",
- "loadAddr drive\n"
+ "boot from floppy device",
+ "loadAddr drive"
);
#endif
projects / karo-tx-uboot.git / blobdiff