* (C) Copyright 2000-2011
* Wolfgang Denk, DENX Software Engineering, wd@denx.de.
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
# include <pcmcia.h>
#endif
-#ifdef CONFIG_8xx
-# include <mpc8xx.h>
-#endif
-
-#ifdef CONFIG_MPC5xxx
-#include <mpc5xxx.h>
-#endif
-
#include <ide.h>
#include <ata.h>
#ifdef CONFIG_ATAPI
static void atapi_inquiry(block_dev_desc_t *dev_desc);
-ulong atapi_read (int device, lbaint_t blknr, ulong blkcnt, void *buffer);
+static ulong atapi_read(int device, ulong blknr, lbaint_t blkcnt,
+ void *buffer);
#endif
ide_dev_desc[i].dev = i;
ide_dev_desc[i].part_type = PART_TYPE_UNKNOWN;
ide_dev_desc[i].blksz = 0;
+ ide_dev_desc[i].log2blksz =
+ LOG2_INVALID(typeof(ide_dev_desc[i].log2blksz));
ide_dev_desc[i].lba = 0;
ide_dev_desc[i].block_read = ide_read;
ide_dev_desc[i].block_write = ide_write;
__attribute__ ((weak, alias("__ide_output_data")));
/* We only need to swap data if we are running on a big endian cpu. */
-/* But Au1x00 cpu:s already swaps data in big endian mode! */
-#if defined(__LITTLE_ENDIAN) || defined(CONFIG_SOC_AU1X00)
+#if defined(__LITTLE_ENDIAN)
void __ide_input_swap_data(int dev, ulong *sect_buf, int words)
{
ide_input_data(dev, sect_buf, words);
#ifdef __MIPS__
*dbuf++ = swab16p((u16 *) pbuf);
*dbuf++ = swab16p((u16 *) pbuf);
-#elif defined(CONFIG_PCS440EP)
- *dbuf++ = *pbuf;
- *dbuf++ = *pbuf;
#else
*dbuf++ = ld_le16(pbuf);
*dbuf++ = ld_le16(pbuf);
#endif /* !MIPS */
}
}
-#endif /* __LITTLE_ENDIAN || CONFIG_AU1X00 */
+#endif /* __LITTLE_ENDIAN */
#if defined(CONFIG_IDE_SWAP_IO)
pbuf = (ushort *) (ATA_CURR_BASE(dev) + ATA_DATA_REG);
dbuf = (ushort *) sect_buf;
while (words--) {
-#if defined(CONFIG_PCS440EP)
- /* not tested, because CF was write protected */
- EIEIO;
- *pbuf = ld_le16(dbuf++);
- EIEIO;
- *pbuf = ld_le16(dbuf++);
-#else
EIEIO;
*pbuf = *dbuf++;
EIEIO;
*pbuf = *dbuf++;
-#endif
}
}
#else /* ! CONFIG_IDE_SWAP_IO */
debug("in input data base for read is %lx\n", (unsigned long) pbuf);
while (words--) {
-#if defined(CONFIG_PCS440EP)
- EIEIO;
- *dbuf++ = ld_le16(pbuf);
- EIEIO;
- *dbuf++ = ld_le16(pbuf);
-#else
EIEIO;
*dbuf++ = *pbuf;
EIEIO;
*dbuf++ = *pbuf;
-#endif
}
}
#else /* ! CONFIG_IDE_SWAP_IO */
/* assuming HD */
dev_desc->type = DEV_TYPE_HARDDISK;
dev_desc->blksz = ATA_BLOCKSIZE;
+ dev_desc->log2blksz = LOG2(dev_desc->blksz);
dev_desc->lun = 0; /* just to fill something in... */
#if 0 /* only used to test the powersaving mode,
/* ------------------------------------------------------------------------- */
-ulong ide_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer)
+ulong ide_read(int device, lbaint_t blknr, lbaint_t blkcnt, void *buffer)
{
ulong n = 0;
unsigned char c;
lba48 = 1;
}
#endif
- debug("ide_read dev %d start %lX, blocks %lX buffer at %lX\n",
+ debug("ide_read dev %d start " LBAF ", blocks " LBAF " buffer at %lX\n",
device, blknr, blkcnt, (ulong) buffer);
ide_led(DEVICE_LED(device), 1); /* LED on */
if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) !=
ATA_STAT_DRQ) {
-#if defined(CONFIG_SYS_64BIT_LBA)
- printf("Error (no IRQ) dev %d blk %lld: status 0x%02x\n",
- device, blknr, c);
-#else
- printf("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
- device, (ulong) blknr, c);
-#endif
+ printf("Error (no IRQ) dev %d blk " LBAF ": status "
+ "%#02x\n", device, blknr, c);
break;
}
/* ------------------------------------------------------------------------- */
-ulong ide_write(int device, lbaint_t blknr, ulong blkcnt, const void *buffer)
+ulong ide_write(int device, lbaint_t blknr, lbaint_t blkcnt, const void *buffer)
{
ulong n = 0;
unsigned char c;
if ((c & (ATA_STAT_DRQ | ATA_STAT_BUSY | ATA_STAT_ERR)) !=
ATA_STAT_DRQ) {
-#if defined(CONFIG_SYS_64BIT_LBA)
- printf("Error (no IRQ) dev %d blk %lld: status 0x%02x\n",
- device, blknr, c);
-#else
- printf("Error (no IRQ) dev %d blk %ld: status 0x%02x\n",
- device, (ulong) blknr, c);
-#endif
+ printf("Error (no IRQ) dev %d blk " LBAF ": status "
+ "%#02x\n", device, blknr, c);
goto WR_OUT;
}
dev_desc->lun = 0;
dev_desc->lba = 0;
dev_desc->blksz = 0;
+ dev_desc->log2blksz = LOG2_INVALID(typeof(dev_desc->log2blksz));
dev_desc->type = iobuf[0] & 0x1f;
if ((iobuf[1] & 0x80) == 0x80)
dev_desc->blksz = ((unsigned long) iobuf[4] << 24) +
((unsigned long) iobuf[5] << 16) +
((unsigned long) iobuf[6] << 8) + ((unsigned long) iobuf[7]);
+ dev_desc->log2blksz = LOG2(dev_desc->blksz);
#ifdef CONFIG_LBA48
/* ATAPI devices cannot use 48bit addressing (ATA/ATAPI v7) */
dev_desc->lba48 = 0;
#define ATAPI_READ_BLOCK_SIZE 2048 /* assuming CD part */
#define ATAPI_READ_MAX_BLOCK (ATAPI_READ_MAX_BYTES/ATAPI_READ_BLOCK_SIZE)
-ulong atapi_read(int device, lbaint_t blknr, ulong blkcnt, void *buffer)
+ulong atapi_read(int device, ulong blknr, lbaint_t blkcnt, void *buffer)
{
ulong n = 0;
unsigned char ccb[12]; /* Command descriptor block */
ulong cnt;
- debug("atapi_read dev %d start %lX, blocks %lX buffer at %lX\n",
+ debug("atapi_read dev %d start %lX, blocks " LBAF " buffer at %lX\n",
device, blknr, blkcnt, (ulong) buffer);
do {
projects / karo-tx-uboot.git / blobdiff