Command usage cleanup

[karo-tx-uboot.git] / common / cmd_mem.c

diff --git a/common/cmd_mem.c b/common/cmd_mem.c
index e2af03063831ff4076dd97d56845562273e4349d..a203e0d3e4dd021a084c214f5c36c8e6b6798b9c 100644 (file)
--- a/common/cmd_mem.c
+++ b/common/cmd_mem.c
@@ -1214,39 +1214,39 @@ int do_unzip ( cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
 /**************************************************/
 U_BOOT_CMD(
        md,     3,      1,      do_mem_md,
-       "md     - memory display\n",
+       "memory display",
        "[.b, .w, .l] address [# of objects]\n    - memory display\n"
 );
 
 
 U_BOOT_CMD(
        mm,     2,      1,      do_mem_mm,
-       "mm     - memory modify (auto-incrementing)\n",
+       "memory modify (auto-incrementing)",
        "[.b, .w, .l] address\n" "    - memory modify, auto increment address\n"
 );
 
 
 U_BOOT_CMD(
        nm,     2,      1,      do_mem_nm,
-       "nm     - memory modify (constant address)\n",
+       "memory modify (constant address)",
        "[.b, .w, .l] address\n    - memory modify, read and keep address\n"
 );
 
 U_BOOT_CMD(
        mw,     4,      1,      do_mem_mw,
-       "mw     - memory write (fill)\n",
+       "memory write (fill)",
        "[.b, .w, .l] address value [count]\n   - write memory\n"
 );
 
 U_BOOT_CMD(
        cp,     4,      1,      do_mem_cp,
-       "cp     - memory copy\n",
+       "memory copy",
        "[.b, .w, .l] source target count\n    - copy memory\n"
 );
 
 U_BOOT_CMD(
        cmp,    4,      1,      do_mem_cmp,
-       "cmp    - memory compare\n",
+       "memory compare",
        "[.b, .w, .l] addr1 addr2 count\n    - compare memory\n"
 );
 
@@ -1254,7 +1254,7 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
        crc32,  4,      1,      do_mem_crc,
-       "crc32  - checksum calculation\n",
+       "checksum calculation",
        "address count [addr]\n    - compute CRC32 checksum [save at addr]\n"
 );
 
@@ -1262,7 +1262,7 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
        crc32,  5,      1,      do_mem_crc,
-       "crc32  - checksum calculation\n",
+       "checksum calculation",
        "address count [addr]\n    - compute CRC32 checksum [save at addr]\n"
        "-v address count crc\n    - verify crc of memory area\n"
 );
@@ -1271,14 +1271,14 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
        base,   2,      1,      do_mem_base,
-       "base   - print or set address offset\n",
+       "print or set address offset",
        "\n    - print address offset for memory commands\n"
        "base off\n    - set address offset for memory commands to 'off'\n"
 );
 
 U_BOOT_CMD(
        loop,   3,      1,      do_mem_loop,
-       "loop   - infinite loop on address range\n",
+       "infinite loop on address range",
        "[.b, .w, .l] address number_of_objects\n"
        "    - loop on a set of addresses\n"
 );
@@ -1286,7 +1286,7 @@ U_BOOT_CMD(
 #ifdef CONFIG_LOOPW
 U_BOOT_CMD(
        loopw,  4,      1,      do_mem_loopw,
-       "loopw  - infinite write loop on address range\n",
+       "infinite write loop on address range",
        "[.b, .w, .l] address number_of_objects data_to_write\n"
        "    - loop on a set of addresses\n"
 );
@@ -1294,7 +1294,7 @@ U_BOOT_CMD(
 
 U_BOOT_CMD(
        mtest,  5,      1,      do_mem_mtest,
-       "mtest   - simple RAM test\n",
+       "simple RAM test",
        "[start [end [pattern [iterations]]]]\n"
        "    - simple RAM read/write test\n"
 );
@@ -1302,13 +1302,13 @@ U_BOOT_CMD(
 #ifdef CONFIG_MX_CYCLIC
 U_BOOT_CMD(
        mdc,    4,      1,      do_mem_mdc,
-       "mdc    - memory display cyclic\n",
+       "memory display cyclic",
        "[.b, .w, .l] address count delay(ms)\n    - memory display cyclic\n"
 );
 
 U_BOOT_CMD(
        mwc,    4,      1,      do_mem_mwc,
-       "mwc    - memory write cyclic\n",
+       "memory write cyclic",
        "[.b, .w, .l] address value delay(ms)\n    - memory write cyclic\n"
 );
 #endif /* CONFIG_MX_CYCLIC */
@@ -1316,7 +1316,7 @@ U_BOOT_CMD(
 #ifdef CONFIG_CMD_UNZIP
 U_BOOT_CMD(
        unzip,  4,      1,      do_unzip,
-       "unzip - unzip a memory region\n",
+       "unzip a memory region",
        "srcaddr dstaddr [dstsize]\n"
 );
 #endif /* CONFIG_CMD_UNZIP */