* (C) Copyright 2001
* Gerald Van Baren, Custom IDEAS, vanbaren@cideas.com
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
#include <common.h>
#include <command.h>
-#include <cmd_mii.h>
#include <miiphy.h>
-#if (CONFIG_COMMANDS & CFG_CMD_MII)
+typedef struct _MII_reg_desc_t {
+ ushort regno;
+ char * name;
+} MII_reg_desc_t;
-/*
- * Display values from last command.
- */
-uint last_op;
-uint last_addr;
-uint last_data;
-uint last_reg;
+static const MII_reg_desc_t reg_0_5_desc_tbl[] = {
+ { MII_BMCR, "PHY control register" },
+ { MII_BMSR, "PHY status register" },
+ { MII_PHYSID1, "PHY ID 1 register" },
+ { MII_PHYSID2, "PHY ID 2 register" },
+ { MII_ADVERTISE, "Autonegotiation advertisement register" },
+ { MII_LPA, "Autonegotiation partner abilities register" },
+};
-/*
- * MII read/write
- *
- * Syntax:
- * mii read {addr} {reg}
- * mii write {addr} {reg} {data}
- */
+typedef struct _MII_field_desc_t {
+ ushort hi;
+ ushort lo;
+ ushort mask;
+ char * name;
+} MII_field_desc_t;
+
+static const MII_field_desc_t reg_0_desc_tbl[] = {
+ { 15, 15, 0x01, "reset" },
+ { 14, 14, 0x01, "loopback" },
+ { 13, 6, 0x81, "speed selection" }, /* special */
+ { 12, 12, 0x01, "A/N enable" },
+ { 11, 11, 0x01, "power-down" },
+ { 10, 10, 0x01, "isolate" },
+ { 9, 9, 0x01, "restart A/N" },
+ { 8, 8, 0x01, "duplex" }, /* special */
+ { 7, 7, 0x01, "collision test enable" },
+ { 5, 0, 0x3f, "(reserved)" }
+};
+
+static const MII_field_desc_t reg_1_desc_tbl[] = {
+ { 15, 15, 0x01, "100BASE-T4 able" },
+ { 14, 14, 0x01, "100BASE-X full duplex able" },
+ { 13, 13, 0x01, "100BASE-X half duplex able" },
+ { 12, 12, 0x01, "10 Mbps full duplex able" },
+ { 11, 11, 0x01, "10 Mbps half duplex able" },
+ { 10, 10, 0x01, "100BASE-T2 full duplex able" },
+ { 9, 9, 0x01, "100BASE-T2 half duplex able" },
+ { 8, 8, 0x01, "extended status" },
+ { 7, 7, 0x01, "(reserved)" },
+ { 6, 6, 0x01, "MF preamble suppression" },
+ { 5, 5, 0x01, "A/N complete" },
+ { 4, 4, 0x01, "remote fault" },
+ { 3, 3, 0x01, "A/N able" },
+ { 2, 2, 0x01, "link status" },
+ { 1, 1, 0x01, "jabber detect" },
+ { 0, 0, 0x01, "extended capabilities" },
+};
+
+static const MII_field_desc_t reg_2_desc_tbl[] = {
+ { 15, 0, 0xffff, "OUI portion" },
+};
+
+static const MII_field_desc_t reg_3_desc_tbl[] = {
+ { 15, 10, 0x3f, "OUI portion" },
+ { 9, 4, 0x3f, "manufacturer part number" },
+ { 3, 0, 0x0f, "manufacturer rev. number" },
+};
+
+static const MII_field_desc_t reg_4_desc_tbl[] = {
+ { 15, 15, 0x01, "next page able" },
+ { 14, 14, 0x01, "(reserved)" },
+ { 13, 13, 0x01, "remote fault" },
+ { 12, 12, 0x01, "(reserved)" },
+ { 11, 11, 0x01, "asymmetric pause" },
+ { 10, 10, 0x01, "pause enable" },
+ { 9, 9, 0x01, "100BASE-T4 able" },
+ { 8, 8, 0x01, "100BASE-TX full duplex able" },
+ { 7, 7, 0x01, "100BASE-TX able" },
+ { 6, 6, 0x01, "10BASE-T full duplex able" },
+ { 5, 5, 0x01, "10BASE-T able" },
+ { 4, 0, 0x1f, "xxx to do" },
+};
+
+static const MII_field_desc_t reg_5_desc_tbl[] = {
+ { 15, 15, 0x01, "next page able" },
+ { 14, 14, 0x01, "acknowledge" },
+ { 13, 13, 0x01, "remote fault" },
+ { 12, 12, 0x01, "(reserved)" },
+ { 11, 11, 0x01, "asymmetric pause able" },
+ { 10, 10, 0x01, "pause able" },
+ { 9, 9, 0x01, "100BASE-T4 able" },
+ { 8, 8, 0x01, "100BASE-X full duplex able" },
+ { 7, 7, 0x01, "100BASE-TX able" },
+ { 6, 6, 0x01, "10BASE-T full duplex able" },
+ { 5, 5, 0x01, "10BASE-T able" },
+ { 4, 0, 0x1f, "xxx to do" },
+};
+typedef struct _MII_field_desc_and_len_t {
+ const MII_field_desc_t *pdesc;
+ ushort len;
+} MII_field_desc_and_len_t;
+
+static const MII_field_desc_and_len_t desc_and_len_tbl[] = {
+ { reg_0_desc_tbl, ARRAY_SIZE(reg_0_desc_tbl) },
+ { reg_1_desc_tbl, ARRAY_SIZE(reg_1_desc_tbl) },
+ { reg_2_desc_tbl, ARRAY_SIZE(reg_2_desc_tbl) },
+ { reg_3_desc_tbl, ARRAY_SIZE(reg_3_desc_tbl) },
+ { reg_4_desc_tbl, ARRAY_SIZE(reg_4_desc_tbl) },
+ { reg_5_desc_tbl, ARRAY_SIZE(reg_5_desc_tbl) },
+};
+
+static void dump_reg(
+ ushort regval,
+ const MII_reg_desc_t *prd,
+ const MII_field_desc_and_len_t *pdl);
+
+static int special_field(
+ ushort regno,
+ const MII_field_desc_t *pdesc,
+ ushort regval);
+
+static void MII_dump_0_to_5(
+ ushort regvals[6],
+ uchar reglo,
+ uchar reghi)
+{
+ ulong i;
+
+ for (i = 0; i < 6; i++) {
+ if ((reglo <= i) && (i <= reghi))
+ dump_reg(regvals[i], ®_0_5_desc_tbl[i],
+ &desc_and_len_tbl[i]);
+ }
+}
+
+static void dump_reg(
+ ushort regval,
+ const MII_reg_desc_t *prd,
+ const MII_field_desc_and_len_t *pdl)
+{
+ ulong i;
+ ushort mask_in_place;
+ const MII_field_desc_t *pdesc;
+
+ printf("%u. (%04hx) -- %s --\n",
+ prd->regno, regval, prd->name);
+
+ for (i = 0; i < pdl->len; i++) {
+ pdesc = &pdl->pdesc[i];
+
+ mask_in_place = pdesc->mask << pdesc->lo;
+
+ printf(" (%04hx:%04hx) %u.",
+ mask_in_place,
+ regval & mask_in_place,
+ prd->regno);
+
+ if (special_field(prd->regno, pdesc, regval)) {
+ }
+ else {
+ if (pdesc->hi == pdesc->lo)
+ printf("%2u ", pdesc->lo);
+ else
+ printf("%2u-%2u", pdesc->hi, pdesc->lo);
+ printf(" = %5u %s",
+ (regval & mask_in_place) >> pdesc->lo,
+ pdesc->name);
+ }
+ printf("\n");
+
+ }
+ printf("\n");
+}
-int do_mii (cmd_tbl_t * cmdtp, int flag, int argc, char *argv[])
+/* Special fields:
+** 0.6,13
+** 0.8
+** 2.15-0
+** 3.15-0
+** 4.4-0
+** 5.4-0
+*/
+
+static int special_field(
+ ushort regno,
+ const MII_field_desc_t *pdesc,
+ ushort regval)
+{
+ if ((regno == MII_BMCR) && (pdesc->lo == 6)) {
+ ushort speed_bits = regval & (BMCR_SPEED1000 | BMCR_SPEED100);
+ printf("%2u,%2u = b%u%u speed selection = %s Mbps",
+ 6, 13,
+ (regval >> 6) & 1,
+ (regval >> 13) & 1,
+ speed_bits == BMCR_SPEED1000 ? "1000" :
+ speed_bits == BMCR_SPEED100 ? "100" :
+ "10");
+ return 1;
+ }
+
+ else if ((regno == MII_BMCR) && (pdesc->lo == 8)) {
+ printf("%2u = %5u duplex = %s",
+ pdesc->lo,
+ (regval >> pdesc->lo) & 1,
+ ((regval >> pdesc->lo) & 1) ? "full" : "half");
+ return 1;
+ }
+
+ else if ((regno == MII_ADVERTISE) && (pdesc->lo == 0)) {
+ ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
+ printf("%2u-%2u = %5u selector = %s",
+ pdesc->hi, pdesc->lo, sel_bits,
+ sel_bits == PHY_ANLPAR_PSB_802_3 ?
+ "IEEE 802.3" :
+ sel_bits == PHY_ANLPAR_PSB_802_9 ?
+ "IEEE 802.9 ISLAN-16T" :
+ "???");
+ return 1;
+ }
+
+ else if ((regno == MII_LPA) && (pdesc->lo == 0)) {
+ ushort sel_bits = (regval >> pdesc->lo) & pdesc->mask;
+ printf("%2u-%2u = %u selector = %s",
+ pdesc->hi, pdesc->lo, sel_bits,
+ sel_bits == PHY_ANLPAR_PSB_802_3 ?
+ "IEEE 802.3" :
+ sel_bits == PHY_ANLPAR_PSB_802_9 ?
+ "IEEE 802.9 ISLAN-16T" :
+ "???");
+ return 1;
+ }
+
+ return 0;
+}
+
+static char last_op[2];
+static uint last_data;
+static uint last_addr_lo;
+static uint last_addr_hi;
+static uint last_reg_lo;
+static uint last_reg_hi;
+
+static void extract_range(
+ char * input,
+ unsigned char * plo,
+ unsigned char * phi)
{
- char op;
+ char * end;
+ *plo = simple_strtoul(input, &end, 16);
+ if (*end == '-') {
+ end++;
+ *phi = simple_strtoul(end, NULL, 16);
+ }
+ else {
+ *phi = *plo;
+ }
+}
+
+/* ---------------------------------------------------------------- */
+static int do_mii(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[])
+{
+ char op[2];
+ unsigned char addrlo, addrhi, reglo, reghi;
unsigned char addr, reg;
unsigned short data;
int rcode = 0;
+ const char *devname;
-#ifdef CONFIG_MPC860
+ if (argc < 2)
+ return CMD_RET_USAGE;
+
+#if defined(CONFIG_MII_INIT)
mii_init ();
#endif
* We use the last specified parameters, unless new ones are
* entered.
*/
- op = last_op;
- addr = last_addr;
- data = last_data;
- reg = last_reg;
+ op[0] = last_op[0];
+ op[1] = last_op[1];
+ addrlo = last_addr_lo;
+ addrhi = last_addr_hi;
+ reglo = last_reg_lo;
+ reghi = last_reg_hi;
+ data = last_data;
if ((flag & CMD_FLAG_REPEAT) == 0) {
- op = argv[1][0];
+ op[0] = argv[1][0];
+ if (strlen(argv[1]) > 1)
+ op[1] = argv[1][1];
+ else
+ op[1] = '\0';
+
if (argc >= 3)
- addr = simple_strtoul (argv[2], NULL, 16);
+ extract_range(argv[2], &addrlo, &addrhi);
if (argc >= 4)
- reg = simple_strtoul (argv[3], NULL, 16);
+ extract_range(argv[3], ®lo, ®hi);
if (argc >= 5)
data = simple_strtoul (argv[4], NULL, 16);
}
+ /* use current device */
+ devname = miiphy_get_current_dev();
+
/*
* check info/read/write.
*/
- if (op == 'i') {
- int j;
+ if (op[0] == 'i') {
+ unsigned char j, start, end;
unsigned int oui;
unsigned char model;
unsigned char rev;
/*
* Look for any and all PHYs. Valid addresses are 0..31.
*/
- for (j = 0; j < 32; j++) {
- if (miiphy_info (j, &oui, &model, &rev) == 0) {
- printf ("PHY 0x%02X: "
+ if (argc >= 3) {
+ start = addrlo; end = addrhi;
+ } else {
+ start = 0; end = 31;
+ }
+
+ for (j = start; j <= end; j++) {
+ if (miiphy_info (devname, j, &oui, &model, &rev) == 0) {
+ printf("PHY 0x%02X: "
"OUI = 0x%04X, "
"Model = 0x%02X, "
"Rev = 0x%02X, "
- "%3dbaseT, %s\n",
+ "%3dbase%s, %s\n",
j, oui, model, rev,
- miiphy_speed (j) == _100BASET ? 100 : 10,
- miiphy_duplex (j) == FULL ? "FDX" : "HDX");
+ miiphy_speed (devname, j),
+ miiphy_is_1000base_x (devname, j)
+ ? "X" : "T",
+ (miiphy_duplex (devname, j) == FULL)
+ ? "FDX" : "HDX");
+ }
+ }
+ } else if (op[0] == 'r') {
+ for (addr = addrlo; addr <= addrhi; addr++) {
+ for (reg = reglo; reg <= reghi; reg++) {
+ data = 0xffff;
+ if (miiphy_read (devname, addr, reg, &data) != 0) {
+ printf(
+ "Error reading from the PHY addr=%02x reg=%02x\n",
+ addr, reg);
+ rcode = 1;
+ } else {
+ if ((addrlo != addrhi) || (reglo != reghi))
+ printf("addr=%02x reg=%02x data=",
+ (uint)addr, (uint)reg);
+ printf("%04X\n", data & 0x0000FFFF);
+ }
+ }
+ if ((addrlo != addrhi) && (reglo != reghi))
+ printf("\n");
+ }
+ } else if (op[0] == 'w') {
+ for (addr = addrlo; addr <= addrhi; addr++) {
+ for (reg = reglo; reg <= reghi; reg++) {
+ if (miiphy_write (devname, addr, reg, data) != 0) {
+ printf("Error writing to the PHY addr=%02x reg=%02x\n",
+ addr, reg);
+ rcode = 1;
+ }
}
}
- } else if (op == 'r') {
- if (miiphy_read (addr, reg, &data) != 0) {
- printf ("Error reading from the PHY\n");
- rcode = 1;
+ } else if (strncmp(op, "du", 2) == 0) {
+ ushort regs[6];
+ int ok = 1;
+ if ((reglo > 5) || (reghi > 5)) {
+ printf(
+ "The MII dump command only formats the "
+ "standard MII registers, 0-5.\n");
+ return 1;
}
- printf ("%04X\n", data & 0x0000FFFF);
- } else if (op == 'w') {
- if (miiphy_write (addr, reg, data) != 0) {
- printf ("Error writing to the PHY\n");
- rcode = 1;
+ for (addr = addrlo; addr <= addrhi; addr++) {
+ for (reg = reglo; reg < reghi + 1; reg++) {
+ if (miiphy_read(devname, addr, reg, ®s[reg]) != 0) {
+ ok = 0;
+ printf(
+ "Error reading from the PHY addr=%02x reg=%02x\n",
+ addr, reg);
+ rcode = 1;
+ }
+ }
+ if (ok)
+ MII_dump_0_to_5(regs, reglo, reghi);
+ printf("\n");
}
+ } else if (strncmp(op, "de", 2) == 0) {
+ if (argc == 2)
+ miiphy_listdev ();
+ else
+ miiphy_set_current_dev (argv[2]);
} else {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
+ return CMD_RET_USAGE;
}
/*
* Save the parameters for repeats.
*/
- last_op = op;
- last_addr = addr;
- last_data = data;
+ last_op[0] = op[0];
+ last_op[1] = op[1];
+ last_addr_lo = addrlo;
+ last_addr_hi = addrhi;
+ last_reg_lo = reglo;
+ last_reg_hi = reghi;
+ last_data = data;
return rcode;
}
-#endif /* CFG_CMD_MII */
+/***************************************************/
+
+U_BOOT_CMD(
+ mii, 5, 1, do_mii,
+ "MII utility commands",
+ "device - list available devices\n"
+ "mii device <devname> - set current device\n"
+ "mii info <addr> - display MII PHY info\n"
+ "mii read <addr> <reg> - read MII PHY <addr> register <reg>\n"
+ "mii write <addr> <reg> <data> - write MII PHY <addr> register <reg>\n"
+ "mii dump <addr> <reg> - pretty-print <addr> <reg> (0-5 only)\n"
+ "Addr and/or reg may be ranges, e.g. 2-7."
+);
projects / karo-tx-uboot.git / blobdiff