* (C) Copyright 2006-2007 OpenMoko, Inc.
* Added 16-bit nand support
* (C) 2004 Texas Instruments
+ *
+ * Copyright 2010 Freescale Semiconductor
+ * The portions of this file whose copyright is held by Freescale and which
+ * are not considered a derived work of GPL v2-only code may be distributed
+ * and/or modified under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of the
+ * License, or (at your option) any later version.
*/
#include <common.h>
u8 *part_num, struct part_info **part);
#endif
-static int nand_dump(nand_info_t *nand, ulong off, int only_oob)
+static int nand_dump(nand_info_t *nand, ulong off, int only_oob, int repeat)
{
int i;
u_char *datbuf, *oobbuf, *p;
+ static loff_t last;
+
+ if (repeat)
+ off = last + nand->writesize;
+
+ last = off;
datbuf = malloc(nand->writesize + nand->oobsize);
oobbuf = malloc(nand->oobsize);
/* ------------------------------------------------------------------------- */
-static inline int str2long(char *p, ulong *num)
+static int set_dev(int dev)
+{
+ if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE ||
+ !nand_info[dev].name) {
+ puts("No such device\n");
+ return -1;
+ }
+
+ if (nand_curr_device == dev)
+ return 0;
+
+ printf("Device %d: %s", dev, nand_info[dev].name);
+ puts("... is now current device\n");
+ nand_curr_device = dev;
+
+#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
+ board_nand_select_device(nand_info[dev].priv, dev);
+#endif
+
+ return 0;
+}
+
+static inline int str2off(const char *p, loff_t *num)
+{
+ char *endptr;
+
+ *num = simple_strtoull(p, &endptr, 16);
+ return *p != '\0' && *endptr == '\0';
+}
+
+static inline int str2long(const char *p, ulong *num)
{
char *endptr;
*num = simple_strtoul(p, &endptr, 16);
- return (*p != '\0' && *endptr == '\0') ? 1 : 0;
+ return *p != '\0' && *endptr == '\0';
}
-static int
-arg_off_size(int argc, char * const argv[], nand_info_t *nand, ulong *off, size_t *size)
+static int get_part(const char *partname, int *idx, loff_t *off, loff_t *size)
{
- int idx = nand_curr_device;
-#if defined(CONFIG_CMD_MTDPARTS)
+#ifdef CONFIG_CMD_MTDPARTS
struct mtd_device *dev;
struct part_info *part;
u8 pnum;
+ int ret;
- if (argc >= 1 && !(str2long(argv[0], off))) {
- if ((mtdparts_init() == 0) &&
- (find_dev_and_part(argv[0], &dev, &pnum, &part) == 0)) {
- if (dev->id->type != MTD_DEV_TYPE_NAND) {
- puts("not a NAND device\n");
- return -1;
- }
- *off = part->offset;
- if (argc >= 2) {
- if (!(str2long(argv[1], (ulong *)size))) {
- printf("'%s' is not a number\n", argv[1]);
- return -1;
- }
- if (*size > part->size)
- *size = part->size;
- } else {
- *size = part->size;
- }
- idx = dev->id->num;
- *nand = nand_info[idx];
- goto out;
- }
+ ret = mtdparts_init();
+ if (ret)
+ return ret;
+
+ ret = find_dev_and_part(partname, &dev, &pnum, &part);
+ if (ret)
+ return ret;
+
+ if (dev->id->type != MTD_DEV_TYPE_NAND) {
+ puts("not a NAND device\n");
+ return -1;
}
+
+ *off = part->offset;
+ *size = part->size;
+ *idx = dev->id->num;
+
+ ret = set_dev(*idx);
+ if (ret)
+ return ret;
+
+ return 0;
+#else
+ puts("offset is not a number\n");
+ return -1;
#endif
+}
- if (argc >= 1) {
- if (!(str2long(argv[0], off))) {
- printf("'%s' is not a number\n", argv[0]);
- return -1;
- }
- } else {
+static int arg_off(const char *arg, int *idx, loff_t *off, loff_t *maxsize)
+{
+ if (!str2off(arg, off))
+ return get_part(arg, idx, off, maxsize);
+
+ if (*off >= nand_info[*idx].size) {
+ puts("Offset exceeds device limit\n");
+ return -1;
+ }
+
+ *maxsize = nand_info[*idx].size - *off;
+ return 0;
+}
+
+static int arg_off_size(int argc, char *const argv[], int *idx,
+ loff_t *off, loff_t *size)
+{
+ int ret;
+ loff_t maxsize;
+
+ if (argc == 0) {
*off = 0;
+ *size = nand_info[*idx].size;
+ goto print;
}
- if (argc >= 2) {
- if (!(str2long(argv[1], (ulong *)size))) {
- printf("'%s' is not a number\n", argv[1]);
- return -1;
- }
- } else {
- *size = nand->size - *off;
+ ret = arg_off(argv[0], idx, off, &maxsize);
+ if (ret)
+ return ret;
+
+ if (argc == 1) {
+ *size = maxsize;
+ goto print;
}
-#if defined(CONFIG_CMD_MTDPARTS)
-out:
-#endif
- printf("device %d ", idx);
- if (*size == nand->size)
+ if (!str2off(argv[1], size)) {
+ printf("'%s' is not a number\n", argv[1]);
+ return -1;
+ }
+
+ if (*size > maxsize) {
+ puts("Size exceeds partition or device limit\n");
+ return -1;
+ }
+
+print:
+ printf("device %d ", *idx);
+ if (*size == nand_info[*idx].size)
puts("whole chip\n");
else
- printf("offset 0x%lx, size 0x%zx\n", *off, *size);
+ printf("offset 0x%llx, size 0x%llx\n",
+ (unsigned long long)*off, (unsigned long long)*size);
return 0;
}
#ifdef CONFIG_ENV_OFFSET_OOB
unsigned long nand_env_oob_offset;
-int do_nand_env_oob(cmd_tbl_t *cmdtp, nand_info_t *nand,
- int argc, char * const argv[])
+int do_nand_env_oob(cmd_tbl_t *cmdtp, int argc, char *const argv[])
{
int ret;
uint32_t oob_buf[ENV_OFFSET_SIZE/sizeof(uint32_t)];
-
+ nand_info_t *nand = &nand_info[0];
char *cmd = argv[1];
+ if (CONFIG_SYS_MAX_NAND_DEVICE == 0 || !nand->name) {
+ puts("no devices available\n");
+ return 1;
+ }
+
+ set_dev(0);
+
if (!strcmp(cmd, "get")) {
ret = get_nand_env_oob(nand, &nand_env_oob_offset);
if (ret)
printf("0x%08lx\n", nand_env_oob_offset);
} else if (!strcmp(cmd, "set")) {
- ulong addr;
- size_t dummy_size;
+ loff_t addr;
+ loff_t maxsize;
struct mtd_oob_ops ops;
+ int idx = 0;
if (argc < 3)
goto usage;
- if (arg_off_size(argc - 2, argv + 2, nand, &addr,
- &dummy_size) < 0) {
- printf("Offset or partition name expected\n");
+ if (arg_off(argv[2], &idx, &addr, &maxsize)) {
+ puts("Offset or partition name expected\n");
+ return 1;
+ }
+
+ if (idx != 0) {
+ puts("Partition not on first NAND device\n");
return 1;
}
if (addr != nand_env_oob_offset) {
printf("Verification of env offset in OOB failed: "
- "0x%08lx expected but got 0x%08lx\n",
- addr, nand_env_oob_offset);
+ "0x%08llx expected but got 0x%08lx\n",
+ (unsigned long long)addr, nand_env_oob_offset);
return 1;
}
} else {
return ret;
usage:
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
#endif
-static void nand_print_info(int idx)
+static void nand_print_and_set_info(int idx)
{
nand_info_t *nand = &nand_info[idx];
struct nand_chip *chip = nand->priv;
+ const int bufsz = 32;
+ char buf[bufsz];
+
printf("Device %d: ", idx);
if (chip->numchips > 1)
printf("%dx ", chip->numchips);
printf("%s, sector size %u KiB\n",
nand->name, nand->erasesize >> 10);
+ printf(" Page size %8d b\n", nand->writesize);
+ printf(" OOB size %8d b\n", nand->oobsize);
+ printf(" Erase size %8d b\n", nand->erasesize);
+
+ /* Set geometry info */
+ sprintf(buf, "%x", nand->writesize);
+ setenv("nand_writesize", buf);
+
+ sprintf(buf, "%x", nand->oobsize);
+ setenv("nand_oobsize", buf);
+
+ sprintf(buf, "%x", nand->erasesize);
+ setenv("nand_erasesize", buf);
}
int do_nand(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
{
- int i, dev, ret = 0;
- ulong addr, off;
- size_t size;
+ int i, ret = 0;
+ ulong addr;
+ loff_t off, size;
char *cmd, *s;
nand_info_t *nand;
#ifdef CONFIG_SYS_NAND_QUIET
int quiet = 0;
#endif
const char *quiet_str = getenv("quiet");
+ int dev = nand_curr_device;
+ int repeat = flag & CMD_FLAG_REPEAT;
/* at least two arguments please */
if (argc < 2)
cmd = argv[1];
+ /* Only "dump" is repeatable. */
+ if (repeat && strcmp(cmd, "dump"))
+ return 0;
+
if (strcmp(cmd, "info") == 0) {
putc('\n');
for (i = 0; i < CONFIG_SYS_MAX_NAND_DEVICE; i++) {
if (nand_info[i].name)
- nand_print_info(i);
+ nand_print_and_set_info(i);
}
return 0;
}
if (strcmp(cmd, "device") == 0) {
-
if (argc < 3) {
putc('\n');
- if ((nand_curr_device < 0) ||
- (nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE))
+ if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE)
puts("no devices available\n");
else
- nand_print_info(nand_curr_device);
+ nand_print_and_set_info(dev);
return 0;
}
- dev = (int)simple_strtoul(argv[2], NULL, 10);
- if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE || !nand_info[dev].name) {
- puts("No such device\n");
- return 1;
- }
- printf("Device %d: %s", dev, nand_info[dev].name);
- puts("... is now current device\n");
- nand_curr_device = dev;
-#ifdef CONFIG_SYS_NAND_SELECT_DEVICE
- /*
- * Select the chip in the board/cpu specific driver
- */
- board_nand_select_device(nand_info[dev].priv, dev);
-#endif
+ dev = (int)simple_strtoul(argv[2], NULL, 10);
+ set_dev(dev);
return 0;
}
- if (strcmp(cmd, "bad") != 0 && strcmp(cmd, "erase") != 0 &&
- strncmp(cmd, "dump", 4) != 0 &&
- strncmp(cmd, "read", 4) != 0 && strncmp(cmd, "write", 5) != 0 &&
- strcmp(cmd, "scrub") != 0 && strcmp(cmd, "markbad") != 0 &&
- strcmp(cmd, "biterr") != 0 &&
- strcmp(cmd, "lock") != 0 && strcmp(cmd, "unlock") != 0
-#ifdef CONFIG_ENV_OFFSET_OOB
- && strcmp(cmd, "env.oob") != 0
-#endif
- )
- goto usage;
-
#ifdef CONFIG_ENV_OFFSET_OOB
/* this command operates only on the first nand device */
- if (strcmp(cmd, "env.oob") == 0) {
- return do_nand_env_oob(cmdtp, &nand_info[0],
- argc - 1, argv + 1);
- }
+ if (strcmp(cmd, "env.oob") == 0)
+ return do_nand_env_oob(cmdtp, argc - 1, argv + 1);
#endif
- /* the following commands operate on the current device */
- if (nand_curr_device < 0 || nand_curr_device >= CONFIG_SYS_MAX_NAND_DEVICE ||
- !nand_info[nand_curr_device].name) {
+ /* The following commands operate on the current device, unless
+ * overridden by a partition specifier. Note that if somehow the
+ * current device is invalid, it will have to be changed to a valid
+ * one before these commands can run, even if a partition specifier
+ * for another device is to be used.
+ */
+ if (dev < 0 || dev >= CONFIG_SYS_MAX_NAND_DEVICE ||
+ !nand_info[dev].name) {
puts("\nno devices available\n");
return 1;
}
- nand = &nand_info[nand_curr_device];
+ nand = &nand_info[dev];
if (strcmp(cmd, "bad") == 0) {
- printf("\nDevice %d bad blocks:\n", nand_curr_device);
+ printf("\nDevice %d bad blocks:\n", dev);
for (off = 0; off < nand->size; off += nand->erasesize)
if (nand_block_isbad(nand, off))
- printf(" %08lx\n", off);
+ printf(" %08llx\n", (unsigned long long)off);
return 0;
}
* 0 1 2 3 4
* nand erase [clean] [off size]
*/
- if (strcmp(cmd, "erase") == 0 || strcmp(cmd, "scrub") == 0) {
+ if (strncmp(cmd, "erase", 5) == 0 || strncmp(cmd, "scrub", 5) == 0) {
nand_erase_options_t opts;
/* "clean" at index 2 means request to write cleanmarker */
int clean = argc > 2 && !strcmp("clean", argv[2]);
- int o = clean ? 3 : 2;
- int scrub = !strcmp(cmd, "scrub");
+ int scrub_yes = argc > 2 && !strcmp("-y", argv[2]);
+ int o = (clean || scrub_yes) ? 3 : 2;
+ int scrub = !strncmp(cmd, "scrub", 5);
+ int spread = 0;
+ int args = 2;
+ const char *scrub_warn =
+ "Warning: "
+ "scrub option will erase all factory set bad blocks!\n"
+ " "
+ "There is no reliable way to recover them.\n"
+ " "
+ "Use this command only for testing purposes if you\n"
+ " "
+ "are sure of what you are doing!\n"
+ "\nReally scrub this NAND flash? <y/N>\n";
+
+ if (cmd[5] != 0) {
+ if (!strcmp(&cmd[5], ".spread")) {
+ spread = 1;
+ } else if (!strcmp(&cmd[5], ".part")) {
+ args = 1;
+ } else if (!strcmp(&cmd[5], ".chip")) {
+ args = 0;
+ } else {
+ goto usage;
+ }
+ }
- printf("\nNAND %s: ", scrub ? "scrub" : "erase");
+ /*
+ * Don't allow missing arguments to cause full chip/partition
+ * erases -- easy to do accidentally, e.g. with a misspelled
+ * variable name.
+ */
+ if (argc != o + args)
+ goto usage;
+
+ printf("\nNAND %s: ", cmd);
/* skip first two or three arguments, look for offset and size */
- if (arg_off_size(argc - o, argv + o, nand, &off, &size) != 0)
+ if (arg_off_size(argc - o, argv + o, &dev, &off, &size) != 0)
return 1;
+ nand = &nand_info[dev];
+
memset(&opts, 0, sizeof(opts));
opts.offset = off;
opts.length = size;
opts.jffs2 = clean;
opts.quiet = quiet;
+ opts.spread = spread;
if (scrub) {
- puts("Warning: "
- "scrub option will erase all factory set "
- "bad blocks!\n"
- " "
- "There is no reliable way to recover them.\n"
- " "
- "Use this command only for testing purposes "
- "if you\n"
- " "
- "are sure of what you are doing!\n"
- "\nReally scrub this NAND flash? <y/N>\n");
-
- if (getc() == 'y') {
+ if (!scrub_yes)
+ puts(scrub_warn);
+
+ if (scrub_yes)
+ opts.scrub = 1;
+ else if (getc() == 'y') {
puts("y");
if (getc() == '\r')
opts.scrub = 1;
if (argc < 3)
goto usage;
- s = strchr(cmd, '.');
off = (int)simple_strtoul(argv[2], NULL, 16);
-
- if (s != NULL && strcmp(s, ".oob") == 0)
- ret = nand_dump(nand, off, 1);
- else
- ret = nand_dump(nand, off, 0);
+ ret = nand_dump(nand, off, !strcmp(&cmd[4], ".oob"), repeat);
return ret == 0 ? 1 : 0;
-
}
if (strncmp(cmd, "read", 4) == 0 || strncmp(cmd, "write", 5) == 0) {
+ size_t rwsize;
int read;
if (argc < 4)
read = strncmp(cmd, "read", 4) == 0; /* 1 = read, 0 = write */
printf("\nNAND %s: ", read ? "read" : "write");
- if (arg_off_size(argc - 3, argv + 3, nand, &off, &size) != 0)
+ if (arg_off_size(argc - 3, argv + 3, &dev, &off, &size) != 0)
return 1;
+ nand = &nand_info[dev];
+ rwsize = size;
+
s = strchr(cmd, '.');
if (!s || !strcmp(s, ".jffs2") ||
!strcmp(s, ".e") || !strcmp(s, ".i")) {
if (read)
- ret = nand_read_skip_bad(nand, off, &size,
+ ret = nand_read_skip_bad(nand, off, &rwsize,
(u_char *)addr);
else
- ret = nand_write_skip_bad(nand, off, &size,
- (u_char *)addr);
+ ret = nand_write_skip_bad(nand, off, &rwsize,
+ (u_char *)addr, 0);
+#ifdef CONFIG_CMD_NAND_TRIMFFS
+ } else if (!strcmp(s, ".trimffs")) {
+ if (read) {
+ printf("Unknown nand command suffix '%s'\n", s);
+ return 1;
+ }
+ ret = nand_write_skip_bad(nand, off, &rwsize,
+ (u_char *)addr,
+ WITH_DROP_FFS);
+#endif
+#ifdef CONFIG_CMD_NAND_YAFFS
+ } else if (!strcmp(s, ".yaffs")) {
+ if (read) {
+ printf("Unknown nand command suffix '%s'.\n", s);
+ return 1;
+ }
+ ret = nand_write_skip_bad(nand, off, &rwsize,
+ (u_char *)addr, WITH_YAFFS_OOB);
+#endif
} else if (!strcmp(s, ".oob")) {
/* out-of-band data */
mtd_oob_ops_t ops = {
.oobbuf = (u8 *)addr,
- .ooblen = size,
+ .ooblen = rwsize,
+ .mode = MTD_OOB_RAW
+ };
+
+ if (read)
+ ret = nand->read_oob(nand, off, &ops);
+ else
+ ret = nand->write_oob(nand, off, &ops);
+ } else if (!strcmp(s, ".raw")) {
+ /* Raw access */
+ mtd_oob_ops_t ops = {
+ .datbuf = (u8 *)addr,
+ .oobbuf = ((u8 *)addr) + nand->writesize,
+ .len = nand->writesize,
+ .ooblen = nand->oobsize,
.mode = MTD_OOB_RAW
};
+ rwsize = nand->writesize + nand->oobsize;
+
if (read)
ret = nand->read_oob(nand, off, &ops);
else
return 1;
}
- printf(" %zu bytes %s: %s\n", size,
+ printf(" %zu bytes %s: %s\n", rwsize,
read ? "read" : "written", ret ? "ERROR" : "OK");
return ret == 0 ? 0 : 1;
}
if (strcmp(cmd, "unlock") == 0) {
- if (arg_off_size(argc - 2, argv + 2, nand, &off, &size) < 0)
+ if (arg_off_size(argc - 2, argv + 2, &dev, &off, &size) < 0)
return 1;
- if (!nand_unlock(nand, off, size)) {
+ if (!nand_unlock(&nand_info[dev], off, size)) {
puts("NAND flash successfully unlocked\n");
} else {
puts("Error unlocking NAND flash, "
#endif
usage:
- cmd_usage(cmdtp);
- return 1;
+ return cmd_usage(cmdtp);
}
-U_BOOT_CMD(nand, CONFIG_SYS_MAXARGS, 1, do_nand,
+U_BOOT_CMD(
+ nand, CONFIG_SYS_MAXARGS, 1, do_nand,
"NAND sub-system",
"info - show available NAND devices\n"
"nand device [dev] - show or set current device\n"
"nand write - addr off|partition size\n"
" read/write 'size' bytes starting at offset 'off'\n"
" to/from memory address 'addr', skipping bad blocks.\n"
- "nand erase [clean] [off size] - erase 'size' bytes from\n"
- " offset 'off' (entire device if not specified)\n"
+ "nand read.raw - addr off|partition\n"
+ "nand write.raw - addr off|partition\n"
+ " Use read.raw/write.raw to avoid ECC and access the page as-is.\n"
+#ifdef CONFIG_CMD_NAND_TRIMFFS
+ "nand write.trimffs - addr off|partition size\n"
+ " write 'size' bytes starting at offset 'off' from memory address\n"
+ " 'addr', skipping bad blocks and dropping any pages at the end\n"
+ " of eraseblocks that contain only 0xFF\n"
+#endif
+#ifdef CONFIG_CMD_NAND_YAFFS
+ "nand write.yaffs - addr off|partition size\n"
+ " write 'size' bytes starting at offset 'off' with yaffs format\n"
+ " from memory address 'addr', skipping bad blocks.\n"
+#endif
+ "nand erase[.spread] [clean] off size - erase 'size' bytes "
+ "from offset 'off'\n"
+ " With '.spread', erase enough for given file size, otherwise,\n"
+ " 'size' includes skipped bad blocks.\n"
+ "nand erase.part [clean] partition - erase entire mtd partition'\n"
+ "nand erase.chip [clean] - erase entire chip'\n"
"nand bad - show bad blocks\n"
"nand dump[.oob] off - dump page\n"
- "nand scrub - really clean NAND erasing bad blocks (UNSAFE)\n"
+ "nand scrub [-y] off size | scrub.part partition | scrub.chip\n"
+ " really clean NAND erasing bad blocks (UNSAFE)\n"
"nand markbad off [...] - mark bad block(s) at offset (UNSAFE)\n"
"nand biterr off - make a bit error at offset (UNSAFE)"
#ifdef CONFIG_CMD_NAND_LOCK_UNLOCK
ulong offset, ulong addr, char *cmd)
{
int r;
- char *ep, *s;
+ char *s;
size_t cnt;
image_header_t *hdr;
#if defined(CONFIG_FIT)
load_addr = addr;
- /* Check if we should attempt an auto-start */
- if (((ep = getenv("autostart")) != NULL) && (strcmp(ep, "yes") == 0)) {
- char *local_args[2];
- extern int do_bootm(cmd_tbl_t *, int, int, char *[]);
-
- local_args[0] = cmd;
- local_args[1] = NULL;
-
- printf("Automatic boot of image at addr 0x%08lx ...\n", addr);
-
- do_bootm(cmdtp, 0, 1, local_args);
- return 1;
- }
- return 0;
+ return bootm_maybe_autostart(cmdtp, cmd);
}
int do_nandboot(cmd_tbl_t * cmdtp, int flag, int argc, char * const argv[])
#if defined(CONFIG_CMD_MTDPARTS)
usage:
#endif
- cmd_usage(cmdtp);
show_boot_progress(-53);
- return 1;
+ return cmd_usage(cmdtp);
}
show_boot_progress(53);
projects / karo-tx-uboot.git / blobdiff