/*
- *
* Most of this source has been derived from the Linux USB
* project:
* (C) Copyright Linus Torvalds 1999
* Adapted for U-Boot:
* (C) Copyright 2001 Denis Peter, MPL AG Switzerland
*
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- *
+ * SPDX-License-Identifier: GPL-2.0+
*/
/*
#include <linux/ctype.h>
#include <asm/byteorder.h>
#include <asm/unaligned.h>
-
+#include <errno.h>
#include <usb.h>
#ifdef CONFIG_4xx
#include <asm/4xx_pci.h>
#endif
-#ifdef DEBUG
-#define USB_DEBUG 1
-#define USB_HUB_DEBUG 1
-#else
-#define USB_DEBUG 0
-#define USB_HUB_DEBUG 0
-#endif
-
-#define USB_PRINTF(fmt, args...) debug_cond(USB_DEBUG, fmt, ##args)
-#define USB_HUB_PRINTF(fmt, args...) debug_cond(USB_HUB_DEBUG, fmt, ##args)
-
#define USB_BUFSIZ 512
static struct usb_device usb_dev[USB_MAX_DEVICE];
void *ctrl;
struct usb_device *dev;
int i, start_index = 0;
+ int controllers_initialized = 0;
+ int ret;
dev_index = 0;
asynch_allowed = 1;
for (i = 0; i < CONFIG_USB_MAX_CONTROLLER_COUNT; i++) {
/* init low_level USB */
printf("USB%d: ", i);
- if (usb_lowlevel_init(i, &ctrl)) {
+ ret = usb_lowlevel_init(i, USB_INIT_HOST, &ctrl);
+ if (ret == -ENODEV) { /* No such device. */
+ puts("Port not available.\n");
+ controllers_initialized++;
+ continue;
+ }
+
+ if (ret) { /* Other error. */
puts("lowlevel init failed\n");
continue;
}
* lowlevel init is OK, now scan the bus for devices
* i.e. search HUBs and configure them
*/
+ controllers_initialized++;
start_index = dev_index;
printf("scanning bus %d for devices... ", i);
dev = usb_alloc_new_device(ctrl);
usb_started = 1;
}
- USB_PRINTF("scan end\n");
+ debug("scan end\n");
/* if we were not able to find at least one working bus, bail out */
- if (!usb_started) {
+ if (controllers_initialized == 0)
puts("USB error: all controllers failed lowlevel init\n");
- return -1;
- }
- return 0;
+ return usb_started ? 0 : -1;
}
/******************************************************************************
setup_packet->value = cpu_to_le16(value);
setup_packet->index = cpu_to_le16(index);
setup_packet->length = cpu_to_le16(size);
- USB_PRINTF("usb_control_msg: request: 0x%X, requesttype: 0x%X, " \
- "value 0x%X index 0x%X length 0x%X\n",
- request, requesttype, value, index, size);
+ debug("usb_control_msg: request: 0x%X, requesttype: 0x%X, " \
+ "value 0x%X index 0x%X length 0x%X\n",
+ request, requesttype, value, index, size);
dev->status = USB_ST_NOT_PROC; /*not yet processed */
if (submit_control_msg(dev, pipe, data, size, setup_packet) < 0)
/* Control => bidirectional */
dev->epmaxpacketout[b] = ep_wMaxPacketSize;
dev->epmaxpacketin[b] = ep_wMaxPacketSize;
- USB_PRINTF("##Control EP epmaxpacketout/in[%d] = %d\n",
- b, dev->epmaxpacketin[b]);
+ debug("##Control EP epmaxpacketout/in[%d] = %d\n",
+ b, dev->epmaxpacketin[b]);
} else {
if ((ep->bEndpointAddress & 0x80) == 0) {
/* OUT Endpoint */
if (ep_wMaxPacketSize > dev->epmaxpacketout[b]) {
dev->epmaxpacketout[b] = ep_wMaxPacketSize;
- USB_PRINTF("##EP epmaxpacketout[%d] = %d\n",
- b, dev->epmaxpacketout[b]);
+ debug("##EP epmaxpacketout[%d] = %d\n",
+ b, dev->epmaxpacketout[b]);
}
} else {
/* IN Endpoint */
if (ep_wMaxPacketSize > dev->epmaxpacketin[b]) {
dev->epmaxpacketin[b] = ep_wMaxPacketSize;
- USB_PRINTF("##EP epmaxpacketin[%d] = %d\n",
- b, dev->epmaxpacketin[b]);
+ debug("##EP epmaxpacketin[%d] = %d\n",
+ b, dev->epmaxpacketin[b]);
}
} /* if out */
} /* if control */
/*******************************************************************************
* Parse the config, located in buffer, and fills the dev->config structure.
* Note that all little/big endian swapping are done automatically.
+ * (wTotalLength has already been swapped and sanitized when it was read.)
*/
static int usb_parse_config(struct usb_device *dev,
unsigned char *buffer, int cfgno)
{
struct usb_descriptor_header *head;
int index, ifno, epno, curr_if_num;
- int i;
u16 ep_wMaxPacketSize;
+ struct usb_interface *if_desc = NULL;
ifno = -1;
epno = -1;
head->bDescriptorType);
return -1;
}
- memcpy(&dev->config, buffer, buffer[0]);
- le16_to_cpus(&(dev->config.desc.wTotalLength));
+ if (head->bLength != USB_DT_CONFIG_SIZE) {
+ printf("ERROR: Invalid USB CFG length (%d)\n", head->bLength);
+ return -1;
+ }
+ memcpy(&dev->config, head, USB_DT_CONFIG_SIZE);
dev->config.no_of_if = 0;
index = dev->config.desc.bLength;
/* Ok the first entry must be a configuration entry,
* now process the others */
head = (struct usb_descriptor_header *) &buffer[index];
- while (index + 1 < dev->config.desc.wTotalLength) {
+ while (index + 1 < dev->config.desc.wTotalLength && head->bLength) {
switch (head->bDescriptorType) {
case USB_DT_INTERFACE:
+ if (head->bLength != USB_DT_INTERFACE_SIZE) {
+ printf("ERROR: Invalid USB IF length (%d)\n",
+ head->bLength);
+ break;
+ }
+ if (index + USB_DT_INTERFACE_SIZE >
+ dev->config.desc.wTotalLength) {
+ puts("USB IF descriptor overflowed buffer!\n");
+ break;
+ }
if (((struct usb_interface_descriptor *) \
- &buffer[index])->bInterfaceNumber != curr_if_num) {
+ head)->bInterfaceNumber != curr_if_num) {
/* this is a new interface, copy new desc */
ifno = dev->config.no_of_if;
+ if (ifno >= USB_MAXINTERFACES) {
+ puts("Too many USB interfaces!\n");
+ /* try to go on with what we have */
+ return 1;
+ }
+ if_desc = &dev->config.if_desc[ifno];
dev->config.no_of_if++;
- memcpy(&dev->config.if_desc[ifno],
- &buffer[index], buffer[index]);
- dev->config.if_desc[ifno].no_of_ep = 0;
- dev->config.if_desc[ifno].num_altsetting = 1;
+ memcpy(if_desc, head,
+ USB_DT_INTERFACE_SIZE);
+ if_desc->no_of_ep = 0;
+ if_desc->num_altsetting = 1;
curr_if_num =
- dev->config.if_desc[ifno].desc.bInterfaceNumber;
+ if_desc->desc.bInterfaceNumber;
} else {
/* found alternate setting for the interface */
- dev->config.if_desc[ifno].num_altsetting++;
+ if (ifno >= 0) {
+ if_desc = &dev->config.if_desc[ifno];
+ if_desc->num_altsetting++;
+ }
}
break;
case USB_DT_ENDPOINT:
+ if (head->bLength != USB_DT_ENDPOINT_SIZE) {
+ printf("ERROR: Invalid USB EP length (%d)\n",
+ head->bLength);
+ break;
+ }
+ if (index + USB_DT_ENDPOINT_SIZE >
+ dev->config.desc.wTotalLength) {
+ puts("USB EP descriptor overflowed buffer!\n");
+ break;
+ }
+ if (ifno < 0) {
+ puts("Endpoint descriptor out of order!\n");
+ break;
+ }
epno = dev->config.if_desc[ifno].no_of_ep;
+ if_desc = &dev->config.if_desc[ifno];
+ if (epno > USB_MAXENDPOINTS) {
+ printf("Interface %d has too many endpoints!\n",
+ if_desc->desc.bInterfaceNumber);
+ return 1;
+ }
/* found an endpoint */
- dev->config.if_desc[ifno].no_of_ep++;
- memcpy(&dev->config.if_desc[ifno].ep_desc[epno],
- &buffer[index], buffer[index]);
+ if_desc->no_of_ep++;
+ memcpy(&if_desc->ep_desc[epno], head,
+ USB_DT_ENDPOINT_SIZE);
ep_wMaxPacketSize = get_unaligned(&dev->config.\
if_desc[ifno].\
ep_desc[epno].\
if_desc[ifno].\
ep_desc[epno].\
wMaxPacketSize);
- USB_PRINTF("if %d, ep %d\n", ifno, epno);
+ debug("if %d, ep %d\n", ifno, epno);
+ break;
+ case USB_DT_SS_ENDPOINT_COMP:
+ if (head->bLength != USB_DT_SS_EP_COMP_SIZE) {
+ printf("ERROR: Invalid USB EPC length (%d)\n",
+ head->bLength);
+ break;
+ }
+ if (index + USB_DT_SS_EP_COMP_SIZE >
+ dev->config.desc.wTotalLength) {
+ puts("USB EPC descriptor overflowed buffer!\n");
+ break;
+ }
+ if (ifno < 0 || epno < 0) {
+ puts("EPC descriptor out of order!\n");
+ break;
+ }
+ if_desc = &dev->config.if_desc[ifno];
+ memcpy(&if_desc->ss_ep_comp_desc[epno], head,
+ USB_DT_SS_EP_COMP_SIZE);
break;
default:
if (head->bLength == 0)
return 1;
- USB_PRINTF("unknown Description Type : %x\n",
- head->bDescriptorType);
+ debug("unknown Description Type : %x\n",
+ head->bDescriptorType);
+#ifdef DEBUG
{
-#ifdef USB_DEBUG
unsigned char *ch = (unsigned char *)head;
-#endif
+ int i;
+
for (i = 0; i < head->bLength; i++)
- USB_PRINTF("%02X ", *ch++);
- USB_PRINTF("\n\n\n");
+ debug("%02X ", *ch++);
+ debug("\n\n\n");
}
+#endif
break;
}
index += head->bLength;
unsigned char *buffer, int cfgno)
{
int result;
- unsigned int tmp;
+ unsigned int length;
struct usb_config_descriptor *config;
config = (struct usb_config_descriptor *)&buffer[0];
"(expected %i, got %i)\n", 9, result);
return -1;
}
- tmp = le16_to_cpu(config->wTotalLength);
+ length = le16_to_cpu(config->wTotalLength);
- if (tmp > USB_BUFSIZ) {
- printf("usb_get_configuration_no: failed to get " \
- "descriptor - too long: %d\n", tmp);
+ if (length > USB_BUFSIZ) {
+ printf("%s: failed to get descriptor - too long: %d\n",
+ __func__, length);
return -1;
}
- result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, tmp);
- USB_PRINTF("get_conf_no %d Result %d, wLength %d\n",
- cfgno, result, tmp);
+ result = usb_get_descriptor(dev, USB_DT_CONFIG, cfgno, buffer, length);
+ debug("get_conf_no %d Result %d, wLength %d\n", cfgno, result, length);
+ config->wTotalLength = length; /* validated, with CPU byte order */
+
return result;
}
{
int res;
- USB_PRINTF("set address %d\n", dev->devnum);
+ debug("set address %d\n", dev->devnum);
res = usb_control_msg(dev, usb_snddefctrl(dev),
USB_REQ_SET_ADDRESS, 0,
(dev->devnum), 0,
static int usb_set_configuration(struct usb_device *dev, int configuration)
{
int res;
- USB_PRINTF("set configuration %d\n", configuration);
+ debug("set configuration %d\n", configuration);
/* set setup command */
res = usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
USB_REQ_SET_CONFIGURATION, 0,
if (!dev->have_langid) {
err = usb_string_sub(dev, 0, 0, tbuf);
if (err < 0) {
- USB_PRINTF("error getting string descriptor 0 " \
- "(error=%lx)\n", dev->status);
+ debug("error getting string descriptor 0 " \
+ "(error=%lx)\n", dev->status);
return -1;
} else if (tbuf[0] < 4) {
- USB_PRINTF("string descriptor 0 too short\n");
+ debug("string descriptor 0 too short\n");
return -1;
} else {
dev->have_langid = -1;
dev->string_langid = tbuf[2] | (tbuf[3] << 8);
/* always use the first langid listed */
- USB_PRINTF("USB device number %d default " \
- "language ID 0x%x\n",
- dev->devnum, dev->string_langid);
+ debug("USB device number %d default " \
+ "language ID 0x%x\n",
+ dev->devnum, dev->string_langid);
}
}
struct usb_device *usb_alloc_new_device(void *controller)
{
int i;
- USB_PRINTF("New Device %d\n", dev_index);
+ debug("New Device %d\n", dev_index);
if (dev_index == USB_MAX_DEVICE) {
printf("ERROR, too many USB Devices, max=%d\n", USB_MAX_DEVICE);
return NULL;
void usb_free_device(void)
{
dev_index--;
- USB_PRINTF("Freeing device node: %d\n", dev_index);
+ debug("Freeing device node: %d\n", dev_index);
memset(&usb_dev[dev_index], 0, sizeof(struct usb_device));
usb_dev[dev_index].devnum = -1;
}
+/*
+ * XHCI issues Enable Slot command and thereafter
+ * allocates device contexts. Provide a weak alias
+ * function for the purpose, so that XHCI overrides it
+ * and EHCI/OHCI just work out of the box.
+ */
+__weak int usb_alloc_device(struct usb_device *udev)
+{
+ return 0;
+}
/*
* By the time we get here, the device has gotten a new device ID
* and is in the default state. We need to identify the thing and
int tmp;
ALLOC_CACHE_ALIGN_BUFFER(unsigned char, tmpbuf, USB_BUFSIZ);
+ /*
+ * Allocate usb 3.0 device context.
+ * USB 3.0 (xHCI) protocol tries to allocate device slot
+ * and related data structures first. This call does that.
+ * Refer to sec 4.3.2 in xHCI spec rev1.0
+ */
+ if (usb_alloc_device(dev)) {
+ printf("Cannot allocate device context to get SLOT_ID\n");
+ return -1;
+ }
+
/* We still haven't set the Address yet */
addr = dev->devnum;
dev->devnum = 0;
* http://sourceforge.net/mailarchive/forum.php?
* thread_id=5729457&forum_id=5398
*/
- struct usb_device_descriptor *desc;
- int port = -1;
+ __maybe_unused struct usb_device_descriptor *desc;
struct usb_device *parent = dev->parent;
unsigned short portstatus;
dev->epmaxpacketin[0] = 64;
dev->epmaxpacketout[0] = 64;
+ /*
+ * XHCI needs to issue a Address device command to setup
+ * proper device context structures, before it can interact
+ * with the device. So a get_descriptor will fail before any
+ * of that is done for XHCI unlike EHCI.
+ */
+#ifndef CONFIG_USB_XHCI
err = usb_get_descriptor(dev, USB_DT_DEVICE, 0, desc, 64);
if (err < 0) {
- USB_PRINTF("usb_new_device: usb_get_descriptor() failed\n");
+ debug("usb_new_device: usb_get_descriptor() failed\n");
return 1;
}
dev->descriptor.bMaxPacketSize0 = desc->bMaxPacketSize0;
+ /*
+ * Fetch the device class, driver can use this info
+ * to differentiate between HUB and DEVICE.
+ */
+ dev->descriptor.bDeviceClass = desc->bDeviceClass;
+#endif
- /* find the port number we're at */
if (parent) {
- int j;
-
- for (j = 0; j < parent->maxchild; j++) {
- if (parent->children[j] == dev) {
- port = j;
- break;
- }
- }
- if (port < 0) {
- printf("usb_new_device:cannot locate device's port.\n");
- return 1;
- }
-
/* reset the port for the second time */
- err = hub_port_reset(dev->parent, port, &portstatus);
+ err = hub_port_reset(dev->parent, dev->portnr - 1, &portstatus);
if (err < 0) {
- printf("\n Couldn't reset port %i\n", port);
+ printf("\n Couldn't reset port %i\n", dev->portnr);
return 1;
}
+ } else {
+ usb_reset_root_port();
}
#endif
"len %d, status %lX\n", dev->act_len, dev->status);
return -1;
}
- USB_PRINTF("new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
- dev->descriptor.iManufacturer, dev->descriptor.iProduct,
- dev->descriptor.iSerialNumber);
+ debug("new device strings: Mfr=%d, Product=%d, SerialNumber=%d\n",
+ dev->descriptor.iManufacturer, dev->descriptor.iProduct,
+ dev->descriptor.iSerialNumber);
memset(dev->mf, 0, sizeof(dev->mf));
memset(dev->prod, 0, sizeof(dev->prod));
memset(dev->serial, 0, sizeof(dev->serial));
if (dev->descriptor.iSerialNumber)
usb_string(dev, dev->descriptor.iSerialNumber,
dev->serial, sizeof(dev->serial));
- USB_PRINTF("Manufacturer %s\n", dev->mf);
- USB_PRINTF("Product %s\n", dev->prod);
- USB_PRINTF("SerialNumber %s\n", dev->serial);
+ debug("Manufacturer %s\n", dev->mf);
+ debug("Product %s\n", dev->prod);
+ debug("SerialNumber %s\n", dev->serial);
/* now prode if the device is a hub */
usb_hub_probe(dev, 0);
return 0;
}
+__weak
+int board_usb_init(int index, enum usb_init_type init)
+{
+ return 0;
+}
/* EOF */
projects / karo-tx-uboot.git / blobdiff