gpio: am43xx: expand gpio support

[karo-tx-uboot.git] / configs / ga10h_v1_1_defconfig

diff --git a/configs/ga10h_v1_1_defconfig b/configs/ga10h_v1_1_defconfig
index 3eca0237f3c0fd74463e619025a0cb1de8798fe1..098284db695332d364a3894ba68ea849de8e1c9b 100644 (file)
--- a/configs/ga10h_v1_1_defconfig
+++ b/configs/ga10h_v1_1_defconfig
@@ -1,29 +1,27 @@
-# The ga10h is an 10" tablet with an A33 or A23 soc, 1G RAM, 8G or 16G nand,
-# sdio wifi, 2 micro usb ports, 1 otg and 1 host and 1 micro sd slot.
-#
-# This defconfig is for the v1.1 pcb with an a33 soc.
-CONFIG_SPL=y
-CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
-CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ippo-q8h-v1.2-lcd1024x600"
-CONFIG_USB_MUSB_SUNXI=y
+CONFIG_ARM=y
+CONFIG_ARCH_SUNXI=y
+CONFIG_MACH_SUN8I_A33=y
+CONFIG_DRAM_CLK=432
+CONFIG_DRAM_ZQ=15291
+CONFIG_DRAM_ODT_EN=y
 CONFIG_USB0_VBUS_PIN="AXP0-VBUS-ENABLE"
 CONFIG_USB0_VBUS_DET="AXP0-VBUS-DETECT"
+CONFIG_USB0_ID_DET="PH8"
 CONFIG_AXP_GPIO=y
 CONFIG_VIDEO_LCD_MODE="x:1024,y:600,depth:18,pclk_khz:52000,le:138,ri:162,up:22,lo:10,hs:20,vs:3,sync:3,vmode:0"
-CONFIG_VIDEO_LCD_PANEL_LVDS=y
 CONFIG_VIDEO_LCD_DCLK_PHASE=0
 CONFIG_VIDEO_LCD_POWER="PH7"
 CONFIG_VIDEO_LCD_BL_EN="PH6"
 CONFIG_VIDEO_LCD_BL_PWM="PH0"
-#CONFIG_VIDEO_LCD_BL_PWM_ACTIVE_LOW=n
-CONFIG_ARM=y
-CONFIG_ARCH_SUNXI=y
-CONFIG_MACH_SUN8I_A33=y
-CONFIG_DRAM_CLK=432
-# zq = 0x3bbb
-CONFIG_DRAM_ZQ=15291
-CONFIG_DRAM_ODT_EN=y
-# Wifi power
+CONFIG_VIDEO_LCD_PANEL_LVDS=y
+CONFIG_USB_MUSB_HOST=y
+CONFIG_DEFAULT_DEVICE_TREE="sun8i-a33-ga10h-v1.1"
+# CONFIG_SYS_MALLOC_CLEAR_ON_INIT is not set
+CONFIG_SPL=y
+CONFIG_SYS_EXTRA_OPTIONS="CONS_INDEX=5"
+# CONFIG_CMD_IMLS is not set
+# CONFIG_CMD_FLASH is not set
+# CONFIG_CMD_FPGA is not set
 CONFIG_AXP221_DLDO1_VOLT=3300
-# aldo1 is connected to VCC-IO, VCC-PD, VCC-USB and VCC-HP
 CONFIG_AXP221_ALDO1_VOLT=3000
+CONFIG_USB_EHCI_HCD=y