Merge branch 'master' of git://git.denx.de/u-boot-video

[karo-tx-uboot.git] / doc / README.imximage

diff --git a/doc/README.imximage b/doc/README.imximage
index 3378f7efdb1fe7d12e6630139cd03e2c8404101a..073e3fcb3c6ecc9a7dfa8af468c76f96b16bd4d5 100644 (file)
--- a/doc/README.imximage
+++ b/doc/README.imximage
@@ -2,12 +2,13 @@
 Imximage Boot Image generation using mkimage
 ---------------------------------------------
 
-This document describes how to set up a U-Boot image
-that can be booted by Freescale MX25, MX35 and MX51
-processors via internal boot mode.
+This document describes how to set up a U-Boot image that can be booted
+by Freescale MX25, MX35, MX51, MX53 and MX6 processors via internal boot
+mode.
 
 These processors can boot directly from NAND, SPI flash and SD card flash
-using its internal boot ROM support. They can boot from an internal
+using its internal boot ROM support. MX6 processors additionally support
+boot from NOR flash and SATA disks. All processors can boot from an internal
 UART, if booting from device media fails.
 Booting from NOR flash does not require to use this image type.
 
@@ -57,7 +58,14 @@ Configuration command line syntax:
 2. Following are the valid command strings and associated data strings:-
        Command string          data string
        --------------          -----------
-       BOOT_FROM               nand/spi/sd/onenand
+       IMXIMAGE_VERSION        1/2
+                               1 is for mx25/mx35/mx51 compatible,
+                               2 is for mx53/mx6 compatible,
+                               others is invalid and error is generated.
+                               This command need appear the fist before
+                               other valid commands in configuration file.
+
+       BOOT_FROM               nand/spi/sd/onenand/nor/sata
                                Example:
                                BOOT_FROM spi
        DATA                    type address value
@@ -69,8 +77,9 @@ Configuration command line syntax:
                                Example (write to IOMUXC):
                                DATA 4 0x73FA88a0 0x200
 
-The processor support up to 60 register programming commands. An error
-is generated if more commands are found in the configuration file.
+The processor support up to 60 register programming commands for IMXIMAGE_VERSION 1
+and 121 register programming commands for IMXIMAGE_VERSION 2.
+An error is generated if more commands are found in the configuration file.
 
 3. All commands are optional to program.