The following is a list of files and features that are going to be
removed from the U-Boot source tree. Every entry should contain what
exactly is going away, when it will be gone, why it is being removed,
-and who is going to be doing the work. When the feature is removed
+and who is going to be doing the work. When the feature is removed
from U-Boot, its corresponding entry should also be removed from this
file.
---------------------------
-What: "autoscr" command
-When: Release 2009-09
+What: Remove CONFIG_CMD_MEMTEST from default list
+When: Release v2013.07
-Why: "autosrc" is an ugly and completely non-standard name.
- The "autoscr" command is deprecated and will be replaced by
+Why: The "mtest" command is of little practical use (if any), and
+ experience has shown that a large number of board configu-
+ rations define useless or even dangerous start and end
+ addresses. If not even the board maintainers are able to
+ figure out which memory range can be reliably tested, how can
+ we expect such from the end users? As this problem comes up
+ repeatedly, we rather do not enable this command by default,
+ so only people who know what they are doing will be confronted
+ with it.
- the "source" command as used by other shells such as bash.
+Who: Wolfgang Denk <wd@denx.de>
- Starting with March 2009, both commands will be supported for
- a transition period of 6 months after which "autoscr" will be
- removed. During the transition period existing scripts and
- environment variable names remain untouched for maximum
- compatibiltiy; thse will be changed when support for the
- "autoscr" command get's finally dropped.
+---------------------------
+
+What: Remove CONFIG_SYS_ENABLE_PADS_ALL and CONFIG_SYS_CLOCKS_ENABLE_ALL
+When: Release v2013.07
+
+Why: When set these options enable "all" of the pads and clocks found
+ on OMAP4/5 platforms, so that the Linux Kernel does not have to.
+ It has been agreed that this goes against the U-Boot design
+ philosophy and since f3f98bb0 we have not enabled more than is
+ used in U-Boot. The kernel has been updating drivers to enable
+ rather than assume pads/clocks have been enabled already. Our
+ expectation is that by v2013.07 a suitable kernel shall exist that
+ does not need these options set for a reasonable I/O set to function.
+
+Who: Tom Rini <trini@ti.com> and Sricharan R <r.sricharan@ti.com>
+
+---------------------------
+
+What: Users of the legacy miiphy_* code
+When: undetermined
-Who: Peter Tyser <ptyser@xes-inc.com>
+Why: We now have a PHY library, which allows everyone to share PHY
+ drivers. All new drivers should use this infrastructure, and
+ all old drivers should get converted to use it.
+
+Who: Andy Fleming <afleming@freescale.com> and driver maintainers
---------------------------
for an old and probably incomplete list of such files.
Who: Wolfgang Denk <wd@denx.de> and board maintainers
-
----------------------------
-
-What: Individual I2C commands
-When: April 2009
-Why: Per the U-Boot README, individual I2C commands such as "imd", "imm",
- "imw", etc are deprecated. The single "i2c" command which is
- currently enabled via CONFIG_I2C_CMD_TREE contains the same
- functionality as the individual I2C commands. The individual
- I2C commands should be removed as well as any references to
- CONFIG_I2C_CMD_TREE.
-Who: Peter Tyser <ptyser@xes-inc.com>
-
----------------------------
-
-What: Legacy NAND code
-When: April 2009
-Why: Legacy NAND code is deprecated. Similar functionality exists in
- more recent NAND code ported from the Linux kernel.
-Who: Scott Wood <scottwood@freescale.com>
projects / karo-tx-uboot.git / blobdiff