pinctrl: add pin control uclass support

[karo-tx-uboot.git] / drivers / Makefile

diff --git a/drivers/Makefile b/drivers/Makefile
index 33227c8bd6de003d170962e7f7778ed1b091c460..9d0a5959a8ef0079a7d4268b89000be663385415 100644 (file)
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,8 +1,45 @@
-obj-$(CONFIG_DM) += core/
+obj-$(CONFIG_$(SPL_)DM)                += core/
+obj-$(CONFIG_$(SPL_)CLK)       += clk/
+obj-$(CONFIG_$(SPL_)LED)       += led/
+obj-$(CONFIG_$(SPL_)PINCTRL)   += pinctrl/
+obj-$(CONFIG_$(SPL_)RAM)       += ram/
+
+ifdef CONFIG_SPL_BUILD
+
+obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
+obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
+obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
+obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
+obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ddr/marvell/a38x/
+obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ddr/marvell/axp/
+obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
+obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
+obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
+obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
+obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
+obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
+obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/
+obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
+obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
+obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
+obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
+obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
+obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
+obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
+obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
+
+else
+
 obj-$(CONFIG_DM_DEMO) += demo/
 obj-$(CONFIG_BIOSEMU) += bios_emulator/
 obj-y += block/
 obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
+obj-$(CONFIG_CPU) += cpu/
 obj-y += crypto/
 obj-$(CONFIG_FPGA) += fpga/
 obj-y += hwmon/
@@ -16,8 +53,12 @@ obj-y += twserial/
 obj-y += video/
 obj-y += watchdog/
 obj-$(CONFIG_QE) += qe/
+obj-$(CONFIG_U_QE) += qe/
 obj-y += memory/
 obj-y += pwm/
 obj-y += input/
 # SOC specific infrastructure drivers.
 obj-y += soc/
+obj-y += thermal/
+
+endif