pinctrl: add pin control uclass support

[karo-tx-uboot.git] / drivers / Makefile

diff --git a/drivers/Makefile b/drivers/Makefile
old mode 100755 (executable)
new mode 100644 (file)
index 6a623e3..9d0a595
--- a/drivers/Makefile
+++ b/drivers/Makefile
@@ -1,65 +1,64 @@
-#
-# (C) Copyright 2000-2007
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
+obj-$(CONFIG_$(SPL_)DM)                += core/
+obj-$(CONFIG_$(SPL_)CLK)       += clk/
+obj-$(CONFIG_$(SPL_)LED)       += led/
+obj-$(CONFIG_$(SPL_)PINCTRL)   += pinctrl/
+obj-$(CONFIG_$(SPL_)RAM)       += ram/
 
-include $(TOPDIR)/config.mk
+ifdef CONFIG_SPL_BUILD
 
-# CFLAGS += -DET_DEBUG -DDEBUG
+obj-$(CONFIG_SPL_I2C_SUPPORT) += i2c/
+obj-$(CONFIG_SPL_GPIO_SUPPORT) += gpio/
+obj-$(CONFIG_SPL_MMC_SUPPORT) += mmc/
+obj-$(CONFIG_SPL_MPC8XXX_INIT_DDR_SUPPORT) += ddr/fsl/
+obj-$(CONFIG_SYS_MVEBU_DDR_A38X) += ddr/marvell/a38x/
+obj-$(CONFIG_SYS_MVEBU_DDR_AXP) += ddr/marvell/axp/
+obj-$(CONFIG_ALTERA_SDRAM) += ddr/altera/
+obj-$(CONFIG_SPL_SERIAL_SUPPORT) += serial/
+obj-$(CONFIG_SPL_SPI_FLASH_SUPPORT) += mtd/spi/
+obj-$(CONFIG_SPL_SPI_SUPPORT) += spi/
+obj-$(CONFIG_SPL_POWER_SUPPORT) += power/ power/pmic/
+obj-$(CONFIG_SPL_POWER_SUPPORT) += power/regulator/
+obj-$(CONFIG_SPL_MTD_SUPPORT) += mtd/
+obj-$(CONFIG_SPL_NAND_SUPPORT) += mtd/nand/
+obj-$(CONFIG_SPL_DRIVERS_MISC_SUPPORT) += misc/
+obj-$(CONFIG_SPL_ONENAND_SUPPORT) += mtd/onenand/
+obj-$(CONFIG_SPL_DMA_SUPPORT) += dma/
+obj-$(CONFIG_SPL_ETH_SUPPORT) += net/
+obj-$(CONFIG_SPL_ETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_USBETH_SUPPORT) += net/phy/
+obj-$(CONFIG_SPL_MUSB_NEW_SUPPORT) += usb/musb-new/
+obj-$(CONFIG_SPL_USBETH_SUPPORT) += usb/gadget/
+obj-$(CONFIG_SPL_WATCHDOG_SUPPORT) += watchdog/
+obj-$(CONFIG_SPL_USB_HOST_SUPPORT) += usb/host/
+obj-$(CONFIG_OMAP_USB_PHY) += usb/phy/
+obj-$(CONFIG_SPL_SATA_SUPPORT) += block/
 
-LIB    = $(obj)libdrivers.a
+else
 
-COBJS-y += ali512x.o
-COBJS-y += ns87308.o
-COBJS-y += status_led.o
+obj-$(CONFIG_DM_DEMO) += demo/
+obj-$(CONFIG_BIOSEMU) += bios_emulator/
+obj-y += block/
+obj-$(CONFIG_BOOTCOUNT_LIMIT) += bootcount/
+obj-$(CONFIG_CPU) += cpu/
+obj-y += crypto/
+obj-$(CONFIG_FPGA) += fpga/
+obj-y += hwmon/
+obj-y += misc/
+obj-y += pcmcia/
+obj-y += dfu/
+obj-y += rtc/
+obj-y += sound/
+obj-y += tpm/
+obj-y += twserial/
+obj-y += video/
+obj-y += watchdog/
+obj-$(CONFIG_QE) += qe/
+obj-$(CONFIG_U_QE) += qe/
+obj-y += memory/
+obj-y += pwm/
+obj-y += input/
+# SOC specific infrastructure drivers.
+obj-y += soc/
+obj-y += thermal/
 
-#
-# Block and Flash Drivers
-#
-COBJS-y += at45.o
-COBJS-y += cfi_flash.o
-COBJS-y += dataflash.o
-COBJS-y += mw_eeprom.o
-
-#
-# Miscellaneous Drivers
-#
-COBJS-y += ali512x.o
-COBJS-y += ns87308.o
-COBJS-y += status_led.o
-
-COBJS  := $(COBJS-y)
-SRCS   := $(COBJS:.o=.c)
-OBJS   := $(addprefix $(obj),$(COBJS))
-
-all:   $(LIB)
-
-$(LIB): $(obj).depend $(OBJS)
-       $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+endif