spi_flash: Add spi_flash_probe_fdt() to locate SPI by FDT node

[karo-tx-uboot.git] / drivers / dma / apbh_dma.c

diff --git a/drivers/dma/apbh_dma.c b/drivers/dma/apbh_dma.c
index 510cb28ad5cdb7eb747ea6a3343a784bdffa97f3..22defcd7d9223be898b18cdc8ae1236a38272671 100644 (file)
--- a/drivers/dma/apbh_dma.c
+++ b/drivers/dma/apbh_dma.c
@@ -7,19 +7,7 @@
  * Based on code from LTIB:
  * Copyright (C) 2010 Freescale Semiconductor, Inc. All Rights Reserved.
  *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA.
+ * SPDX-License-Identifier:    GPL-2.0+
  */
 
 #include <linux/list.h>
@@ -556,6 +544,28 @@ int mxs_dma_go(int chan)
        return ret;
 }
 
+/*
+ * Execute a continuously running circular DMA descriptor.
+ * NOTE: This is not intended for general use, but rather
+ *      for the LCD driver in Smart-LCD mode. It allows
+ *      continuous triggering of the RUN bit there.
+ */
+void mxs_dma_circ_start(int chan, struct mxs_dma_desc *pdesc)
+{
+       struct mxs_apbh_regs *apbh_regs =
+               (struct mxs_apbh_regs *)MXS_APBH_BASE;
+
+       mxs_dma_flush_desc(pdesc);
+
+       mxs_dma_enable_irq(chan, 1);
+
+       writel(mxs_dma_cmd_address(pdesc),
+               &apbh_regs->ch[chan].hw_apbh_ch_nxtcmdar);
+       writel(1, &apbh_regs->ch[chan].hw_apbh_ch_sema);
+       writel(1 << (chan + APBH_CTRL0_CLKGATE_CHANNEL_OFFSET),
+               &apbh_regs->hw_apbh_ctrl0_clr);
+}
+
 /*
  * Initialize the DMA hardware
  */