DECLARE_GLOBAL_DATA_PTR;
+#define SDHCI_IRQ_EN_BITS (IRQSTATEN_CC | IRQSTATEN_TC | \
+ IRQSTATEN_CINT | \
+ IRQSTATEN_CTOE | IRQSTATEN_CCE | IRQSTATEN_CEBE | \
+ IRQSTATEN_CIE | IRQSTATEN_DTOE | IRQSTATEN_DCE | \
+ IRQSTATEN_DEBE | IRQSTATEN_BRR | IRQSTATEN_BWR | \
+ IRQSTATEN_DINT)
+
struct fsl_esdhc {
uint dsaddr; /* SDMA system address register */
uint blkattr; /* Block attributes register */
else if (cmd->resp_type & MMC_RSP_PRESENT)
xfertyp |= XFERTYP_RSPTYP_48;
-#if defined(CONFIG_MX53) || defined(CONFIG_T4240QDS)
+#if defined(CONFIG_MX53) || defined(CONFIG_PPC_T4240) || defined(CONFIG_LS102XA)
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
xfertyp |= XFERTYP_CMDTYP_ABORT;
#endif
esdhc_pio_read_write(struct mmc *mmc, struct mmc_data *data)
{
struct fsl_esdhc_cfg *cfg = mmc->priv;
- struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ struct fsl_esdhc *regs = cfg->esdhc_base;
uint blocks;
char *buffer;
uint databuf;
uint size;
- uint irqstat;
uint timeout;
+ int wml = esdhc_read32(®s->wml);
if (data->flags & MMC_DATA_READ) {
+ wml &= WML_RD_WML_MASK;
blocks = data->blocks;
buffer = data->dest;
while (blocks) {
timeout = PIO_TIMEOUT;
size = data->blocksize;
- irqstat = esdhc_read32(®s->irqstat);
- while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BREN)
- && --timeout);
- if (timeout <= 0) {
- printf("\nData Read Failed in PIO Mode.");
- return;
- }
- while (size && (!(irqstat & IRQSTAT_TC))) {
- udelay(100); /* Wait before last byte transfer complete */
- irqstat = esdhc_read32(®s->irqstat);
- databuf = in_le32(®s->datport);
- *((uint *)buffer) = databuf;
- buffer += 4;
- size -= 4;
+ while (size &&
+ !(esdhc_read32(®s->irqstat) & IRQSTAT_TC)) {
+ int i;
+ u32 prsstat;
+
+ while (!((prsstat = esdhc_read32(®s->prsstat)) &
+ PRSSTAT_BREN) && --timeout)
+ /* NOP */;
+ if (!(prsstat & PRSSTAT_BREN)) {
+ printf("%s: Data Read Failed in PIO Mode\n",
+ __func__);
+ return;
+ }
+ for (i = 0; i < wml && size; i++) {
+ databuf = in_le32(®s->datport);
+ memcpy(buffer, &databuf, sizeof(databuf));
+ buffer += 4;
+ size -= 4;
+ }
}
blocks--;
}
} else {
+ wml = (wml & WML_WR_WML_MASK) >> 16;
blocks = data->blocks;
- buffer = (char *)data->src;
+ buffer = (char *)data->src; /* cast away 'const' */
while (blocks) {
timeout = PIO_TIMEOUT;
size = data->blocksize;
- irqstat = esdhc_read32(®s->irqstat);
- while (!(esdhc_read32(®s->prsstat) & PRSSTAT_BWEN)
- && --timeout);
- if (timeout <= 0) {
- printf("\nData Write Failed in PIO Mode.");
- return;
- }
- while (size && (!(irqstat & IRQSTAT_TC))) {
- udelay(100); /* Wait before last byte transfer complete */
- databuf = *((uint *)buffer);
- buffer += 4;
- size -= 4;
- irqstat = esdhc_read32(®s->irqstat);
- out_le32(®s->datport, databuf);
+ while (size &&
+ !(esdhc_read32(®s->irqstat) & IRQSTAT_TC)) {
+ int i;
+ u32 prsstat;
+
+ while (!((prsstat = esdhc_read32(®s->prsstat)) &
+ PRSSTAT_BWEN) && --timeout)
+ /* NOP */;
+ if (!(prsstat & PRSSTAT_BWEN)) {
+ printf("%s: Data Write Failed in PIO Mode\n",
+ __func__);
+ return;
+ }
+ for (i = 0; i < wml && size; i++) {
+ memcpy(&databuf, buffer, sizeof(databuf));
+ out_le32(®s->datport, databuf);
+ buffer += 4;
+ size -= 4;
+ }
}
blocks--;
}
{
int timeout;
struct fsl_esdhc_cfg *cfg = mmc->priv;
- struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
-#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
+ struct fsl_esdhc *regs = cfg->esdhc_base;
uint wml_value;
- wml_value = data->blocksize/4;
+ wml_value = data->blocksize / 4;
if (data->flags & MMC_DATA_READ) {
if (wml_value > WML_RD_WML_MAX)
wml_value = WML_RD_WML_MAX_VAL;
esdhc_clrsetbits32(®s->wml, WML_RD_WML_MASK, wml_value);
+#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
esdhc_write32(®s->dsaddr, (u32)data->dest);
+#endif
} else {
+#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
flush_dcache_range((ulong)data->src,
(ulong)data->src+data->blocks
*data->blocksize);
-
+#endif
if (wml_value > WML_WR_WML_MAX)
wml_value = WML_WR_WML_MAX_VAL;
if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) {
- printf("\nThe SD card is locked. Can not write to a locked card.\n\n");
- return TIMEOUT;
+ printf("The SD card is locked. Can not write to a locked card.\n");
+ return UNUSABLE_ERR;
}
+ flush_dcache_range((unsigned long)data->src,
+ (unsigned long)data->src + data->blocks * data->blocksize);
esdhc_clrsetbits32(®s->wml, WML_WR_WML_MASK,
wml_value << 16);
+#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
esdhc_write32(®s->dsaddr, (u32)data->src);
+#endif
}
-#else /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
- if (!(data->flags & MMC_DATA_READ)) {
- if ((esdhc_read32(®s->prsstat) & PRSSTAT_WPSPL) == 0) {
- printf("\nThe SD card is locked. "
- "Can not write to a locked card.\n\n");
- return TIMEOUT;
- }
- esdhc_write32(®s->dsaddr, (u32)data->src);
- } else
- esdhc_write32(®s->dsaddr, (u32)data->dest);
-#endif /* CONFIG_SYS_FSL_ESDHC_USE_PIO */
- esdhc_write32(®s->blkattr, data->blocks << 16 | data->blocksize);
+ esdhc_write32(®s->blkattr, (data->blocks << 16) | data->blocksize);
/* Calculate the timeout period for data transactions */
/*
if (timeout > 14)
timeout = 14;
-
- if (timeout < 0)
+ else if (timeout < 0)
timeout = 0;
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC_A001
return 0;
}
+#ifndef CONFIG_SYS_FSL_ESDHC_USE_PIO
static void check_and_invalidate_dcache_range
(struct mmc_cmd *cmd,
struct mmc_data *data) {
unsigned end = start+size ;
invalidate_dcache_range(start, end);
}
+#endif
+
/*
* Sends a command out on the bus. Takes the mmc pointer,
* a command pointer, and an optional data pointer.
uint xfertyp;
uint irqstat;
struct fsl_esdhc_cfg *cfg = mmc->priv;
- volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ volatile struct fsl_esdhc *regs = cfg->esdhc_base;
+ unsigned long start;
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC111
if (cmd->cmdidx == MMC_CMD_STOP_TRANSMISSION)
return 0;
#endif
-
esdhc_write32(®s->irqstat, -1);
sync();
+ start = get_timer_masked();
/* Wait for the bus to be idle */
while ((esdhc_read32(®s->prsstat) & PRSSTAT_CICHB) ||
- (esdhc_read32(®s->prsstat) & PRSSTAT_CIDHB))
- ;
+ (esdhc_read32(®s->prsstat) & PRSSTAT_CIDHB)) {
+ if (get_timer(start) > CONFIG_SYS_HZ) {
+ printf("%s: Timeout waiting for bus idle\n", __func__);
+ return TIMEOUT;
+ }
+ }
- while (esdhc_read32(®s->prsstat) & PRSSTAT_DLA)
- ;
+ start = get_timer_masked();
+ while (esdhc_read32(®s->prsstat) & PRSSTAT_DLA) {
+ if (get_timer(start) > CONFIG_SYS_HZ)
+ return TIMEOUT;
+ }
/* Wait at least 8 SD clock cycles before the next command */
/*
/* Set up for a data transfer if we have one */
if (data) {
err = esdhc_setup_data(mmc, data);
- if(err)
+ if (err)
return err;
}
esdhc_write32(®s->cmdarg, cmd->cmdarg);
#if defined(CONFIG_FSL_USDHC)
esdhc_write32(®s->mixctrl,
- (esdhc_read32(®s->mixctrl) & 0xFFFFFF80) | (xfertyp & 0x7F));
+ (esdhc_read32(®s->mixctrl) & ~0x7f) | (xfertyp & 0x7F));
esdhc_write32(®s->xfertyp, xfertyp & 0xFFFF0000);
#else
esdhc_write32(®s->xfertyp, xfertyp);
#endif
+ /* Mask all irqs */
+ esdhc_write32(®s->irqsigen, 0);
+
+ start = get_timer_masked();
/* Wait for the command to complete */
- while (!(esdhc_read32(®s->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE)))
- ;
+ while (!(esdhc_read32(®s->irqstat) & (IRQSTAT_CC | IRQSTAT_CTOE))) {
+ if (get_timer(start) > CONFIG_SYS_HZ) {
+ printf("%s: Timeout waiting for cmd completion\n", __func__);
+ return TIMEOUT;
+ }
+ }
+
+ if (data && (data->flags & MMC_DATA_READ))
+ check_and_invalidate_dcache_range(cmd, data);
irqstat = esdhc_read32(®s->irqstat);
goto out;
}
} while ((irqstat & DATA_COMPLETE) != DATA_COMPLETE);
-#endif
+
if (data->flags & MMC_DATA_READ)
check_and_invalidate_dcache_range(cmd, data);
+#endif
}
out:
}
}
- esdhc_write32(®s->irqstat, -1);
+ esdhc_write32(®s->irqstat, irqstat);
return err;
}
{
int div, pre_div;
struct fsl_esdhc_cfg *cfg = mmc->priv;
- volatile struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ volatile struct fsl_esdhc *regs = cfg->esdhc_base;
int sdhc_clk = cfg->sdhc_clk;
uint clk;
static void esdhc_set_ios(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = mmc->priv;
- struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ struct fsl_esdhc *regs = cfg->esdhc_base;
/* Set the clock speed */
set_sysctl(mmc, mmc->clock);
static int esdhc_init(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = mmc->priv;
- struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ struct fsl_esdhc *regs = cfg->esdhc_base;
int timeout = 1000;
/* Reset the entire host controller */
static int esdhc_getcd(struct mmc *mmc)
{
struct fsl_esdhc_cfg *cfg = mmc->priv;
- struct fsl_esdhc *regs = (struct fsl_esdhc *)cfg->esdhc_base;
+ struct fsl_esdhc *regs = cfg->esdhc_base;
int timeout = 1000;
#ifdef CONFIG_ESDHC_DETECT_QUIRK
u32 caps, voltage_caps;
if (!cfg)
- return -1;
+ return -EINVAL;
regs = (struct fsl_esdhc *)cfg->esdhc_base;
esdhc_setbits32(®s->sysctl, SYSCTL_PEREN | SYSCTL_HCKEN
| SYSCTL_IPGEN | SYSCTL_CKEN);
+ writel(SDHCI_IRQ_EN_BITS, ®s->irqstaten);
memset(&cfg->cfg, 0, sizeof(cfg->cfg));
voltage_caps = 0;
- caps = regs->hostcapblt;
+ caps = esdhc_read32(®s->hostcapblt);
#ifdef CONFIG_SYS_FSL_ERRATUM_ESDHC135
caps = caps & ~(ESDHC_HOSTCAPBLT_SRS |
#endif
if ((cfg->cfg.voltages & voltage_caps) == 0) {
printf("voltage not supported by controller\n");
- return -1;
+ return -EINVAL;
}
cfg->cfg.host_caps = MMC_MODE_4BIT | MMC_MODE_8BIT | MMC_MODE_HC;
#endif
cfg->cfg.f_min = 400000;
- cfg->cfg.f_max = MIN(gd->arch.sdhc_clk, 52000000);
+ cfg->cfg.f_max = min(cfg->sdhc_clk, (u32)52000000);
cfg->cfg.b_max = CONFIG_SYS_MMC_MAX_BLK_COUNT;
{
struct fsl_esdhc_cfg *cfg;
- cfg = calloc(sizeof(struct fsl_esdhc_cfg), 1);
- cfg->esdhc_base = CONFIG_SYS_FSL_ESDHC_ADDR;
+ cfg = kzalloc(sizeof(struct fsl_esdhc_cfg), GFP_KERNEL);
+ if (!cfg)
+ return -ENOMEM;
+ cfg->esdhc_base = (void __iomem *)CONFIG_SYS_FSL_ESDHC_ADDR;
cfg->sdhc_clk = gd->arch.sdhc_clk;
return fsl_esdhc_initialize(bis, cfg);
}
projects / karo-tx-uboot.git / blobdiff