]> git.kernelconcepts.de Git - karo-tx-uboot.git/blobdiff - drivers/mtd/spi/sf_internal.h
spi/sf: Minor cleanups
[karo-tx-uboot.git] / drivers / mtd / spi / sf_internal.h
index 81eea8ce9dbacbbe2b25606c301b1658796d6d5c..9fb555707cdeca8ca2c4e56e204053210a48d76a 100644 (file)
@@ -31,9 +31,9 @@ enum spi_read_cmds {
 };
 
 /* Normal - Extended - Full command set */
-#define RD_NORM        (ARRAY_SLOW | ARRAY_FAST)
-#define RD_EXTN        (RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
-#define RD_FULL        (RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST)
+#define RD_NORM                (ARRAY_SLOW | ARRAY_FAST)
+#define RD_EXTN                (RD_NORM | DUAL_OUTPUT_FAST | DUAL_IO_FAST)
+#define RD_FULL                (RD_EXTN | QUAD_OUTPUT_FAST | QUAD_IO_FAST)
 
 /* sf param flags */
 enum {
@@ -67,12 +67,12 @@ enum {
 #define CMD_WRITE_STATUS               0x01
 #define CMD_PAGE_PROGRAM               0x02
 #define CMD_WRITE_DISABLE              0x04
-#define CMD_READ_STATUS                0x05
+#define CMD_READ_STATUS                        0x05
 #define CMD_QUAD_PAGE_PROGRAM          0x32
 #define CMD_READ_STATUS1               0x35
 #define CMD_WRITE_ENABLE               0x06
-#define CMD_READ_CONFIG                0x35
-#define CMD_FLAG_STATUS                0x70
+#define CMD_READ_CONFIG                        0x35
+#define CMD_FLAG_STATUS                        0x70
 
 /* Read commands */
 #define CMD_READ_ARRAY_SLOW            0x03
@@ -99,13 +99,13 @@ enum {
 
 /* Flash timeout values */
 #define SPI_FLASH_PROG_TIMEOUT         (2 * CONFIG_SYS_HZ)
-#define SPI_FLASH_PAGE_ERASE_TIMEOUT           (5 * CONFIG_SYS_HZ)
+#define SPI_FLASH_PAGE_ERASE_TIMEOUT   (5 * CONFIG_SYS_HZ)
 #define SPI_FLASH_SECTOR_ERASE_TIMEOUT (10 * CONFIG_SYS_HZ)
 
 /* SST specific */
 #ifdef CONFIG_SPI_FLASH_SST
 # define CMD_SST_BP            0x02    /* Byte Program */
-# define CMD_SST_AAI_WP        0xAD    /* Auto Address Incr Word Program */
+# define CMD_SST_AAI_WP                0xAD    /* Auto Address Incr Word Program */
 
 int sst_write_wp(struct spi_flash *flash, u32 offset, size_t len,
                const void *buf);
@@ -121,7 +121,7 @@ int sst_write_bp(struct spi_flash *flash, u32 offset, size_t len,
  * @ext_jedec:         Device ext_jedec ID
  * @sector_size:       Isn't necessarily a sector size from vendor,
  *                     the size listed here is what works with CMD_ERASE_64K
- * @nr_sectors:        No.of sectors on this device
+ * @nr_sectors:                No.of sectors on this device
  * @e_rd_cmd:          Enum list for read commands
  * @flags:             Important param, for flash specific behaviour
  */