+int spi_flash_cmd_read_fast(struct spi_flash *flash, u32 offset,
+ size_t len, void *data)
+{
+ u8 cmd[5], bank_sel = 0;
+ u32 remain_len, read_len;
+ int ret = -1;
+
+ /* Handle memory-mapped SPI */
+ if (flash->memory_map) {
+ memcpy(data, flash->memory_map + offset, len);
+ return 0;
+ }
+
+ cmd[0] = CMD_READ_ARRAY_FAST;
+ cmd[4] = 0x00;
+
+ while (len) {
+#ifdef CONFIG_SPI_FLASH_BAR
+ bank_sel = offset / SPI_FLASH_16MB_BOUN;
+
+ ret = spi_flash_cmd_bankaddr_write(flash, bank_sel);
+ if (ret) {
+ debug("SF: fail to set bank%d\n", bank_sel);
+ return ret;
+ }
+#endif
+ remain_len = (SPI_FLASH_16MB_BOUN * (bank_sel + 1) - offset);
+ if (len < remain_len)
+ read_len = len;
+ else
+ read_len = remain_len;
+
+ spi_flash_addr(offset, cmd);
+
+ ret = spi_flash_read_common(flash, cmd, sizeof(cmd),
+ data, read_len);
+ if (ret < 0) {
+ debug("SF: read failed\n");
+ break;
+ }
+
+ offset += read_len;
+ len -= read_len;
+ data += read_len;
+ }
+
+ return ret;
+}
+
+int spi_flash_cmd_write_status(struct spi_flash *flash, u8 sr)
+{
+ u8 cmd;
+ int ret;
+
+ cmd = CMD_WRITE_STATUS;
+ ret = spi_flash_write_common(flash, &cmd, 1, &sr, 1);
+ if (ret < 0) {
+ debug("SF: fail to write status register\n");
+ return ret;
+ }
+
+ return 0;
+}
+
+#ifdef CONFIG_SPI_FLASH_BAR
+int spi_flash_cmd_bankaddr_write(struct spi_flash *flash, u8 bank_sel)
+{
+ u8 cmd;
+ int ret;
+
+ if (flash->bank_curr == bank_sel) {
+ debug("SF: not require to enable bank%d\n", bank_sel);
+ return 0;
+ }
+
+ cmd = flash->bank_write_cmd;
+ ret = spi_flash_write_common(flash, &cmd, 1, &bank_sel, 1);
+ if (ret < 0) {
+ debug("SF: fail to write bank register\n");
+ return ret;
+ }
+ flash->bank_curr = bank_sel;
+
+ return 0;
+}
+
+int spi_flash_bank_config(struct spi_flash *flash, u8 idcode0)
+{
+ u8 cmd;
+ u8 curr_bank = 0;
+
+ /* discover bank cmds */
+ switch (idcode0) {
+ case SPI_FLASH_SPANSION_IDCODE0:
+ flash->bank_read_cmd = CMD_BANKADDR_BRRD;
+ flash->bank_write_cmd = CMD_BANKADDR_BRWR;
+ break;
+ case SPI_FLASH_STMICRO_IDCODE0:
+ case SPI_FLASH_WINBOND_IDCODE0:
+ flash->bank_read_cmd = CMD_EXTNADDR_RDEAR;
+ flash->bank_write_cmd = CMD_EXTNADDR_WREAR;
+ break;
+ default:
+ printf("SF: Unsupported bank commands %02x\n", idcode0);
+ return -1;
+ }
+
+ /* read the bank reg - on which bank the flash is in currently */
+ cmd = flash->bank_read_cmd;
+ if (flash->size > SPI_FLASH_16MB_BOUN) {
+ if (spi_flash_read_common(flash, &cmd, 1, &curr_bank, 1)) {
+ debug("SF: fail to read bank addr register\n");
+ return -1;
+ }
+ flash->bank_curr = curr_bank;
+ } else {
+ flash->bank_curr = curr_bank;
+ }
+
+ return 0;
+}
+#endif
+
+#ifdef CONFIG_OF_CONTROL
+int spi_flash_decode_fdt(const void *blob, struct spi_flash *flash)
+{
+ fdt_addr_t addr;
+ fdt_size_t size;
+ int node;
+
+ /* If there is no node, do nothing */
+ node = fdtdec_next_compatible(blob, 0, COMPAT_GENERIC_SPI_FLASH);
+ if (node < 0)
+ return 0;
+
+ addr = fdtdec_get_addr_size(blob, node, "memory-map", &size);
+ if (addr == FDT_ADDR_T_NONE) {
+ debug("%s: Cannot decode address\n", __func__);
+ return 0;
+ }
+
+ if (flash->size != size) {
+ debug("%s: Memory map must cover entire device\n", __func__);
+ return -1;
+ }
+ flash->memory_map = (void *)addr;
+
+ return 0;
+}
+#endif /* CONFIG_OF_CONTROL */
+
+/*
+ * The following table holds all device probe functions
+ *
+ * shift: number of continuation bytes before the ID
+ * idcode: the expected IDCODE or 0xff for non JEDEC devices
+ * probe: the function to call
+ *
+ * Non JEDEC devices should be ordered in the table such that
+ * the probe functions with best detection algorithms come first.
+ *
+ * Several matching entries are permitted, they will be tried
+ * in sequence until a probe function returns non NULL.
+ *
+ * IDCODE_CONT_LEN may be redefined if a device needs to declare a
+ * larger "shift" value. IDCODE_PART_LEN generally shouldn't be
+ * changed. This is the max number of bytes probe functions may
+ * examine when looking up part-specific identification info.
+ *
+ * Probe functions will be given the idcode buffer starting at their
+ * manu id byte (the "idcode" in the table below). In other words,
+ * all of the continuation bytes will be skipped (the "shift" below).
+ */
+#define IDCODE_CONT_LEN 0
+#define IDCODE_PART_LEN 5
+static const struct {
+ const u8 shift;
+ const u8 idcode;
+ struct spi_flash *(*probe) (struct spi_slave *spi, u8 *idcode);
+} flashes[] = {
+ /* Keep it sorted by define name */
+#ifdef CONFIG_SPI_FLASH_ATMEL
+ { 0, 0x1f, spi_flash_probe_atmel, },
+#endif
+#ifdef CONFIG_SPI_FLASH_EON
+ { 0, 0x1c, spi_flash_probe_eon, },
+#endif
+#ifdef CONFIG_SPI_FLASH_GIGADEVICE
+ { 0, 0xc8, spi_flash_probe_gigadevice, },
+#endif
+#ifdef CONFIG_SPI_FLASH_MACRONIX
+ { 0, 0xc2, spi_flash_probe_macronix, },
+#endif
+#ifdef CONFIG_SPI_FLASH_SPANSION
+ { 0, 0x01, spi_flash_probe_spansion, },
+#endif
+#ifdef CONFIG_SPI_FLASH_SST
+ { 0, 0xbf, spi_flash_probe_sst, },
+#endif
+#ifdef CONFIG_SPI_FLASH_STMICRO
+ { 0, 0x20, spi_flash_probe_stmicro, },
+#endif
+#ifdef CONFIG_SPI_FLASH_WINBOND
+ { 0, 0xef, spi_flash_probe_winbond, },
+#endif
+#ifdef CONFIG_SPI_FRAM_RAMTRON
+ { 6, 0xc2, spi_fram_probe_ramtron, },
+# undef IDCODE_CONT_LEN
+# define IDCODE_CONT_LEN 6
+#endif
+ /* Keep it sorted by best detection */
+#ifdef CONFIG_SPI_FLASH_STMICRO
+ { 0, 0xff, spi_flash_probe_stmicro, },
+#endif
+#ifdef CONFIG_SPI_FRAM_RAMTRON_NON_JEDEC
+ { 0, 0xff, spi_fram_probe_ramtron, },
+#endif
+};
+#define IDCODE_LEN (IDCODE_CONT_LEN + IDCODE_PART_LEN)
+