#include <command.h>
#include <net.h>
#include <malloc.h>
+#include <linux/mii.h>
#include "ax88180.h"
/*
*/
static void ax88180_rx_handler (struct eth_device *dev);
static int ax88180_phy_initial (struct eth_device *dev);
-static void ax88180_meidia_config (struct eth_device *dev);
-static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev);
-static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev);
+static void ax88180_media_config (struct eth_device *dev);
+static unsigned long get_CicadaPHY_media_mode (struct eth_device *dev);
+static unsigned long get_MarvellPHY_media_mode (struct eth_device *dev);
static unsigned short ax88180_mdio_read (struct eth_device *dev,
unsigned long regaddr);
static void ax88180_mdio_write (struct eth_device *dev,
{
unsigned short delay_cnt = 500;
- ax88180_mdio_write (dev, BMCR, (PHY_RESET | AUTONEG_EN));
+ ax88180_mdio_write (dev, MII_BMCR, (BMCR_RESET | BMCR_ANENABLE));
/* Wait for the reset to complete, or time out (500 ms) */
- while (ax88180_mdio_read (dev, BMCR) & PHY_RESET) {
+ while (ax88180_mdio_read (dev, MII_BMCR) & BMCR_RESET) {
udelay (1000);
if (--delay_cnt == 0) {
printf ("Failed to reset PHY!\n");
{
struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
unsigned long tmp_regval;
+ unsigned short phyaddr;
- /* Check avaliable PHY chipset */
- priv->PhyAddr = MARVELL_88E1111_PHYADDR;
- priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0);
-
- if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) {
-
- debug ("ax88180: Found Marvell 88E1111 PHY."
- " (PHY Addr=0x%x)\n", priv->PhyAddr);
-
- tmp_regval = ax88180_mdio_read (dev, M88_EXT_SSR);
- if ((tmp_regval & HWCFG_MODE_MASK) == RGMII_COPPER_MODE) {
+ /* Search for first avaliable PHY chipset */
+#ifdef CONFIG_PHY_ADDR
+ phyaddr = CONFIG_PHY_ADDR;
+#else
+ for (phyaddr = 0; phyaddr < 32; ++phyaddr)
+#endif
+ {
+ priv->PhyAddr = phyaddr;
+ priv->PhyID0 = ax88180_mdio_read(dev, MII_PHYSID1);
+ priv->PhyID1 = ax88180_mdio_read(dev, MII_PHYSID2);
+
+ switch (priv->PhyID0) {
+ case MARVELL_ALASKA_PHYSID0:
+ debug("ax88180: Found Marvell Alaska PHY family."
+ " (PHY Addr=0x%x)\n", priv->PhyAddr);
+
+ switch (priv->PhyID1) {
+ case MARVELL_88E1118_PHYSID1:
+ ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 2);
+ ax88180_mdio_write(dev, M88E1118_CR,
+ M88E1118_CR_DEFAULT);
+ ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 3);
+ ax88180_mdio_write(dev, M88E1118_LEDCTL,
+ M88E1118_LEDCTL_DEFAULT);
+ ax88180_mdio_write(dev, M88E1118_LEDMIX,
+ M88E1118_LEDMIX_LED050 | M88E1118_LEDMIX_LED150 | 0x15);
+ ax88180_mdio_write(dev, M88E1118_PAGE_SEL, 0);
+ default: /* Default to 88E1111 Phy */
+ tmp_regval = ax88180_mdio_read(dev, M88E1111_EXT_SSR);
+ if ((tmp_regval & HWCFG_MODE_MASK) != RGMII_COPPER_MODE)
+ ax88180_mdio_write(dev, M88E1111_EXT_SCR,
+ DEFAULT_EXT_SCR);
+ }
- ax88180_mdio_write (dev, M88_EXT_SCR, DEFAULT_EXT_SCR);
- if (ax88180_phy_reset (dev) < 0)
+ if (ax88180_phy_reset(dev) < 0)
return 0;
- ax88180_mdio_write (dev, M88_IER, LINK_CHANGE_INT);
- }
- } else {
+ ax88180_mdio_write(dev, M88_IER, LINK_CHANGE_INT);
- priv->PhyAddr = CICADA_CIS8201_PHYADDR;
- priv->PhyID0 = ax88180_mdio_read (dev, PHYIDR0);
+ return 1;
- if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) {
+ case CICADA_CIS8201_PHYSID0:
+ debug("ax88180: Found CICADA CIS8201 PHY"
+ " chipset. (PHY Addr=0x%x)\n", priv->PhyAddr);
- debug ("ax88180: Found CICADA CIS8201 PHY"
- " chipset. (PHY Addr=0x%x)\n", priv->PhyAddr);
- ax88180_mdio_write (dev, CIS_IMR,
+ ax88180_mdio_write(dev, CIS_IMR,
(CIS_INT_ENABLE | LINK_CHANGE_INT));
/* Set CIS_SMI_PRIORITY bit before force the media mode */
- tmp_regval =
- ax88180_mdio_read (dev, CIS_AUX_CTRL_STATUS);
+ tmp_regval = ax88180_mdio_read(dev, CIS_AUX_CTRL_STATUS);
tmp_regval &= ~CIS_SMI_PRIORITY;
- ax88180_mdio_write (dev, CIS_AUX_CTRL_STATUS,
- tmp_regval);
- } else {
- printf ("ax88180: Unknown PHY chipset!!\n");
- return 0;
+ ax88180_mdio_write(dev, CIS_AUX_CTRL_STATUS, tmp_regval);
+
+ return 1;
+
+ case 0xffff:
+ /* No PHY at this addr */
+ break;
+
+ default:
+ printf("ax88180: Unknown PHY chipset %#x at addr %#x\n",
+ priv->PhyID0, priv->PhyAddr);
+ break;
}
}
- return 1;
+ printf("ax88180: Unknown PHY chipset!!\n");
+ return 0;
}
-static void ax88180_meidia_config (struct eth_device *dev)
+static void ax88180_media_config (struct eth_device *dev)
{
struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
unsigned long bmcr_val, bmsr_val;
/* Waiting 2 seconds for PHY link stable */
for (i = 0; i < 20000; i++) {
- bmsr_val = ax88180_mdio_read (dev, BMSR);
- if (bmsr_val & LINKOK) {
+ bmsr_val = ax88180_mdio_read (dev, MII_BMSR);
+ if (bmsr_val & BMSR_LSTATUS) {
break;
}
udelay (100);
}
- bmsr_val = ax88180_mdio_read (dev, BMSR);
+ bmsr_val = ax88180_mdio_read (dev, MII_BMSR);
debug ("ax88180: BMSR=0x%04x\n", (unsigned int)bmsr_val);
- if (bmsr_val & LINKOK) {
- bmcr_val = ax88180_mdio_read (dev, BMCR);
+ if (bmsr_val & BMSR_LSTATUS) {
+ bmcr_val = ax88180_mdio_read (dev, MII_BMCR);
- if (bmcr_val & AUTONEG_EN) {
+ if (bmcr_val & BMCR_ANENABLE) {
/*
* Waiting for Auto-negotiation completion, this may
debug ("ax88180: Auto-negotiation is "
"enabled. Waiting for NWay completion..\n");
for (i = 0; i < 50000; i++) {
- bmsr_val = ax88180_mdio_read (dev, BMSR);
- if (bmsr_val & AUTONEG_COMPLETE) {
+ bmsr_val = ax88180_mdio_read (dev, MII_BMSR);
+ if (bmsr_val & BMSR_ANEGCOMPLETE) {
break;
}
udelay (100);
(unsigned int)bmcr_val, (unsigned int)bmsr_val);
/* Get real media mode here */
- if (priv->PhyID0 == MARVELL_88E1111_PHYIDR0) {
- RealMediaMode = get_MarvellPHY_meida_mode (dev);
- } else if (priv->PhyID0 == CICADA_CIS8201_PHYIDR0) {
- RealMediaMode = get_CicadaPHY_meida_mode (dev);
- } else {
+ switch (priv->PhyID0) {
+ case MARVELL_ALASKA_PHYSID0:
+ RealMediaMode = get_MarvellPHY_media_mode(dev);
+ break;
+ case CICADA_CIS8201_PHYSID0:
+ RealMediaMode = get_CicadaPHY_media_mode(dev);
+ break;
+ default:
RealMediaMode = MEDIA_1000FULL;
+ break;
}
priv->LinkState = INS_LINK_UP;
return;
}
-static unsigned long get_MarvellPHY_meida_mode (struct eth_device *dev)
+static unsigned long get_MarvellPHY_media_mode (struct eth_device *dev)
{
unsigned long m88_ssr;
unsigned long MediaMode;
return MediaMode;
}
-static unsigned long get_CicadaPHY_meida_mode (struct eth_device *dev)
+static unsigned long get_CicadaPHY_media_mode (struct eth_device *dev)
{
unsigned long tmp_regval;
unsigned long MediaMode;
dev->enetaddr[4] | (((unsigned short)dev->enetaddr[5]) << 8);
OUTW (dev, tmp_regval, MACID2);
- ax88180_meidia_config (dev);
+ ax88180_media_config (dev);
OUTW (dev, DEFAULT_RXFILTER, RXFILTER);
if (ISR_Status & ISR_PHY) {
/* Read ISR register once to clear PHY interrupt bit */
tmp_regval = ax88180_mdio_read (dev, M88_ISR);
- ax88180_meidia_config (dev);
+ ax88180_media_config (dev);
}
if ((ISR_Status & ISR_RX) || (ISR_Status & ISR_RXBUFFOVR)) {
}
/* Send a data block via Ethernet. */
-static int
-ax88180_send (struct eth_device *dev, volatile void *packet, int length)
+static int ax88180_send(struct eth_device *dev, void *packet, int length)
{
struct ax88180_private *priv = (struct ax88180_private *)dev->priv;
unsigned short TXDES_addr;
projects / karo-tx-uboot.git / blobdiff