#include <asm/io.h>
#include <asm/dma-mapping.h>
#include <asm/arch/clk.h>
+#include <asm-generic/errno.h>
#include "macb.h"
-#define CONFIG_SYS_MACB_RX_BUFFER_SIZE 4096
-#define CONFIG_SYS_MACB_RX_RING_SIZE (CONFIG_SYS_MACB_RX_BUFFER_SIZE / 128)
-#define CONFIG_SYS_MACB_TX_RING_SIZE 16
-#define CONFIG_SYS_MACB_TX_TIMEOUT 1000
-#define CONFIG_SYS_MACB_AUTONEG_TIMEOUT 5000000
+#define MACB_RX_BUFFER_SIZE 4096
+#define MACB_RX_RING_SIZE (MACB_RX_BUFFER_SIZE / 128)
+#define MACB_TX_RING_SIZE 16
+#define MACB_TX_TIMEOUT 1000
+#define MACB_AUTONEG_TIMEOUT 5000000
struct macb_dma_desc {
u32 addr;
u32 ctrl;
};
+#define DMA_DESC_BYTES(n) (n * sizeof(struct macb_dma_desc))
+#define MACB_TX_DMA_DESC_SIZE (DMA_DESC_BYTES(MACB_TX_RING_SIZE))
+#define MACB_RX_DMA_DESC_SIZE (DMA_DESC_BYTES(MACB_RX_RING_SIZE))
+
#define RXADDR_USED 0x00000001
#define RXADDR_WRAP 0x00000002
struct eth_device *dev = eth_get_dev_by_name(devname);
struct macb_device *macb = to_macb(dev);
- if ( macb->phy_addr != phy_adr )
+ if (macb->phy_addr != phy_adr)
return -1;
arch_get_mdio_control(devname);
struct eth_device *dev = eth_get_dev_by_name(devname);
struct macb_device *macb = to_macb(dev);
- if ( macb->phy_addr != phy_adr )
+ if (macb->phy_addr != phy_adr)
return -1;
arch_get_mdio_control(devname);
}
#endif
+#define RX 1
+#define TX 0
+static inline void macb_invalidate_ring_desc(struct macb_device *macb, bool rx)
+{
+ if (rx)
+ invalidate_dcache_range(macb->rx_ring_dma, macb->rx_ring_dma +
+ MACB_RX_DMA_DESC_SIZE);
+ else
+ invalidate_dcache_range(macb->tx_ring_dma, macb->tx_ring_dma +
+ MACB_TX_DMA_DESC_SIZE);
+}
+
+static inline void macb_flush_ring_desc(struct macb_device *macb, bool rx)
+{
+ if (rx)
+ flush_dcache_range(macb->rx_ring_dma, macb->rx_ring_dma +
+ MACB_RX_DMA_DESC_SIZE);
+ else
+ flush_dcache_range(macb->tx_ring_dma, macb->tx_ring_dma +
+ MACB_TX_DMA_DESC_SIZE);
+}
+
+static inline void macb_flush_rx_buffer(struct macb_device *macb)
+{
+ flush_dcache_range(macb->rx_buffer_dma, macb->rx_buffer_dma +
+ MACB_RX_BUFFER_SIZE);
+}
+
+static inline void macb_invalidate_rx_buffer(struct macb_device *macb)
+{
+ invalidate_dcache_range(macb->rx_buffer_dma, macb->rx_buffer_dma +
+ MACB_RX_BUFFER_SIZE);
+}
#if defined(CONFIG_CMD_NET)
ctrl = length & TXBUF_FRMLEN_MASK;
ctrl |= TXBUF_FRAME_END;
- if (tx_head == (CONFIG_SYS_MACB_TX_RING_SIZE - 1)) {
+ if (tx_head == (MACB_TX_RING_SIZE - 1)) {
ctrl |= TXBUF_WRAP;
macb->tx_head = 0;
- } else
+ } else {
macb->tx_head++;
+ }
macb->tx_ring[tx_head].ctrl = ctrl;
macb->tx_ring[tx_head].addr = paddr;
barrier();
+ macb_flush_ring_desc(macb, TX);
+ /* Do we need check paddr and length is dcache line aligned? */
+ flush_dcache_range(paddr, paddr + length);
macb_writel(macb, NCR, MACB_BIT(TE) | MACB_BIT(RE) | MACB_BIT(TSTART));
/*
* I guess this is necessary because the networking core may
* re-use the transmit buffer as soon as we return...
*/
- for (i = 0; i <= CONFIG_SYS_MACB_TX_TIMEOUT; i++) {
+ for (i = 0; i <= MACB_TX_TIMEOUT; i++) {
barrier();
+ macb_invalidate_ring_desc(macb, TX);
ctrl = macb->tx_ring[tx_head].ctrl;
if (ctrl & TXBUF_USED)
break;
dma_unmap_single(packet, length, paddr);
- if (i <= CONFIG_SYS_MACB_TX_TIMEOUT) {
+ if (i <= MACB_TX_TIMEOUT) {
if (ctrl & TXBUF_UNDERRUN)
printf("%s: TX underrun\n", netdev->name);
if (ctrl & TXBUF_EXHAUSTED)
unsigned int i;
i = macb->rx_tail;
+
+ macb_invalidate_ring_desc(macb, RX);
while (i > new_tail) {
macb->rx_ring[i].addr &= ~RXADDR_USED;
i++;
- if (i > CONFIG_SYS_MACB_RX_RING_SIZE)
+ if (i > MACB_RX_RING_SIZE)
i = 0;
}
}
barrier();
+ macb_flush_ring_desc(macb, RX);
macb->rx_tail = new_tail;
}
u32 status;
for (;;) {
+ macb_invalidate_ring_desc(macb, RX);
+
if (!(macb->rx_ring[rx_tail].addr & RXADDR_USED))
return -1;
if (status & RXBUF_FRAME_END) {
buffer = macb->rx_buffer + 128 * macb->rx_tail;
length = status & RXBUF_FRMLEN_MASK;
+
+ macb_invalidate_rx_buffer(macb);
if (wrapped) {
unsigned int headlen, taillen;
- headlen = 128 * (CONFIG_SYS_MACB_RX_RING_SIZE
+ headlen = 128 * (MACB_RX_RING_SIZE
- macb->rx_tail);
taillen = length - headlen;
memcpy((void *)NetRxPackets[0],
}
NetReceive(buffer, length);
- if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE)
+ if (++rx_tail >= MACB_RX_RING_SIZE)
rx_tail = 0;
reclaim_rx_buffers(macb, rx_tail);
} else {
- if (++rx_tail >= CONFIG_SYS_MACB_RX_RING_SIZE) {
+ if (++rx_tail >= MACB_RX_RING_SIZE) {
wrapped = 1;
rx_tail = 0;
}
macb_mdio_write(macb, MII_BMCR, (BMCR_ANENABLE
| BMCR_ANRESTART));
- for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
+ for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
status = macb_mdio_read(macb, MII_BMSR);
if (status & BMSR_ANEGCOMPLETE)
break;
arch_get_mdio_control(netdev->name);
#ifdef CONFIG_MACB_SEARCH_PHY
/* Auto-detect phy_addr */
- if (!macb_phy_find(macb)) {
+ if (!macb_phy_find(macb))
return 0;
- }
#endif /* CONFIG_MACB_SEARCH_PHY */
/* Check if the PHY is up to snuff... */
}
#ifdef CONFIG_PHYLIB
- phydev->bus = macb->bus;
- phydev->dev = netdev;
- phydev->addr = macb->phy_addr;
+ /* need to consider other phy interface mode */
+ phydev = phy_connect(macb->bus, macb->phy_addr, netdev,
+ PHY_INTERFACE_MODE_RGMII);
+ if (!phydev) {
+ printf("phy_connect failed\n");
+ return -ENODEV;
+ }
+
phy_config(phydev);
#endif
/* Try to re-negotiate if we don't have link already. */
macb_phy_reset(macb);
- for (i = 0; i < CONFIG_SYS_MACB_AUTONEG_TIMEOUT / 100; i++) {
+ for (i = 0; i < MACB_AUTONEG_TIMEOUT / 100; i++) {
status = macb_mdio_read(macb, MII_BMSR);
if (status & BMSR_LSTATUS)
break;
/* initialize DMA descriptors */
paddr = macb->rx_buffer_dma;
- for (i = 0; i < CONFIG_SYS_MACB_RX_RING_SIZE; i++) {
- if (i == (CONFIG_SYS_MACB_RX_RING_SIZE - 1))
+ for (i = 0; i < MACB_RX_RING_SIZE; i++) {
+ if (i == (MACB_RX_RING_SIZE - 1))
paddr |= RXADDR_WRAP;
macb->rx_ring[i].addr = paddr;
macb->rx_ring[i].ctrl = 0;
paddr += 128;
}
- for (i = 0; i < CONFIG_SYS_MACB_TX_RING_SIZE; i++) {
+ macb_flush_ring_desc(macb, RX);
+ macb_flush_rx_buffer(macb);
+
+ for (i = 0; i < MACB_TX_RING_SIZE; i++) {
macb->tx_ring[i].addr = 0;
- if (i == (CONFIG_SYS_MACB_TX_RING_SIZE - 1))
+ if (i == (MACB_TX_RING_SIZE - 1))
macb->tx_ring[i].ctrl = TXBUF_USED | TXBUF_WRAP;
else
macb->tx_ring[i].ctrl = TXBUF_USED;
}
- macb->rx_tail = macb->tx_head = macb->tx_tail = 0;
+ macb_flush_ring_desc(macb, TX);
+
+ macb->rx_tail = 0;
+ macb->tx_head = 0;
+ macb->tx_tail = 0;
macb_writel(macb, RBQP, macb->rx_ring_dma);
macb_writel(macb, TBQP, macb->tx_ring_dma);
return config;
}
+/*
+ * Get the DMA bus width field of the network configuration register that we
+ * should program. We find the width from decoding the design configuration
+ * register to find the maximum supported data bus width.
+ */
+static u32 macb_dbw(struct macb_device *macb)
+{
+ switch (GEM_BFEXT(DBWDEF, gem_readl(macb, DCFG1))) {
+ case 4:
+ return GEM_BF(DBW, GEM_DBW128);
+ case 2:
+ return GEM_BF(DBW, GEM_DBW64);
+ case 1:
+ default:
+ return GEM_BF(DBW, GEM_DBW32);
+ }
+}
+
int macb_eth_initialize(int id, void *regs, unsigned int phy_addr)
{
struct macb_device *macb;
netdev = &macb->netdev;
- macb->rx_buffer = dma_alloc_coherent(CONFIG_SYS_MACB_RX_BUFFER_SIZE,
+ macb->rx_buffer = dma_alloc_coherent(MACB_RX_BUFFER_SIZE,
&macb->rx_buffer_dma);
- macb->rx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_RX_RING_SIZE
- * sizeof(struct macb_dma_desc),
+ macb->rx_ring = dma_alloc_coherent(MACB_RX_DMA_DESC_SIZE,
&macb->rx_ring_dma);
- macb->tx_ring = dma_alloc_coherent(CONFIG_SYS_MACB_TX_RING_SIZE
- * sizeof(struct macb_dma_desc),
+ macb->tx_ring = dma_alloc_coherent(MACB_TX_DMA_DESC_SIZE,
&macb->tx_ring_dma);
+ /* TODO: we need check the rx/tx_ring_dma is dcache line aligned */
+
macb->regs = regs;
macb->phy_addr = phy_addr;
*/
if (macb_is_gem(macb)) {
ncfgr = gem_mdc_clk_div(id, macb);
- ncfgr |= GEM_BF(DBW, 1);
+ ncfgr |= macb_dbw(macb);
} else {
ncfgr = macb_mdc_clk_div(id, macb);
}
projects / karo-tx-uboot.git / blobdiff